Used Ice-Water System for sale (40,225)

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid gelatinization during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and metering unit + All water-contact parts are stainless steel and require no cleaning + Hygienically perfect potable water Langheinz ice water units stand out for: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve Redpeivdvcsfx Ahvjp + Electronic ice bank controller + Stainless steel evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water reservoir + Drain tap in the ice water reservoir + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall console (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way changeover valves --- For water mixing and metering units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters/hour - Peak cooling output*: 180 liters/hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12-month warranty Advantages of chilled ice water: + consistently low discharge water temperatures + precise dough temperature control all year round + rapid swelling when mixing without the need for ice + improved dough quality thanks to freshly chilled, liquid ice water + precise dosing possible with water mixing and dosing unit + water-carrying parts made of stainless steel, maintenance-free + hygienically clean potable water Langheinz ice water systems are characterized by: + constant, low water temperatures Rodpfxsivdvko Ahvep + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank regulators + stainless steel refrigeration evaporator + multi-stage stainless steel water heat exchanger + insulated stainless steel ice water bath + drain tap in the ice water bath + high flow capacity + compact dimensions + easy-care surface structure + low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket, stainless steel (for models L130 & L170): + €499 net - Machine table (for models L130 & L170): + €589 net - 3-way changeover valves --- for water mixing and dosing devices with only 2 inlets (cold/warm) + €349 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling output*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New unit 12 months warranty Advantages of chilled ice water: + Consistently low dispensing water temperatures + Precise, year-round dough temperature control + Rapid swelling during mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel plate heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: Rodpfxoivdu Ue Ahvjp - Stainless steel wall bracket (for models L60 + L100): + €319 net - Machine table (for model L60): + €399 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption at 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of cooled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without the use of ice + Improved dough texture thanks to freshly cooled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-contacting parts are made of stainless steel and maintenance-free + Hygienically perfect, clean drinking water Langheinz ice water systems are characterized by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water baths + Drain tap in ice water bath + High flow capacity + Compact dimensions + Easy-to-maintain surface structure + Low energy consumption SPECIAL accessories, optionally available at additional cost: - Stainless steel wall bracket (for model L130 + L170): + €499 net - Machine table (for model L130 + L170): + €589 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 50 liters Rsdsivdvvspfx Ahvop - Continuous output*: 115 liters / hour - Peak cooling capacity*: 330 liters / hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption per 100 liters: 1.5 – 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and are maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: Rsdpfx Aeivdv Dshvep - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: used, Rain gutter, downpipe and elbow forming machines, complete line. Three machines. 1. Rain gutter forming machine, strip cutting with band saw. Redpfxev Evcts Ahvjp Produced gutter diameter: 80 x 100 mm Used sheet metal dimensions: Width: 350 mm. Thickness: 0.43 – 0.55 mm. 2. Downpipe forming machine, can form 127 mm and 152 mm (standard) sizes. Cutting with guillotine. Used sheet metal dimensions: Width: 300 mm. Thickness: 0.43 – 0.55 mm. 3. Elbow forming machine: 400V/3 If you have any further questions, we will be happy to answer them.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Rjdpfx Ahodzqn Usvop Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP • Automatic height sensing and collision protection • Laser for position determination • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Redpfxjv Dfxzs Ahvjp Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox Redpfx Ahsumvtqovjp - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Ice water facility L 100 model Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Redpfofmcikjx Ahvsp Underframe Visit us at the Milbrandt outlet shop

Year of construction: 2016, condition: excellent (used), A very well-preserved and lightly used soft water system: BWT AQA Smart single-column soft water system. Designed for softening drinking and service water, and to protect water pipes, fittings, appliances, boilers, etc., from malfunctions, damage, and/or scale buildup. Water softening, softening unit. According to the manufacturer's specifications, this pearl water system, intended for installation in domestic plumbing, offers optimal protection against lime scale. The described unit was only in operation for a short time. The system operates using the intelligent regeneration principle. Regeneration salt for refilling is included with the unit. Reduces energy consumption and protects against unsightly lime stains. Energy savings through water softening in the household. Operating manual available. All documents are present. All technical information is provided without guarantee for typographical errors or inaccuracies. Price on request. Sale exclusively within EU countries. Rodpfx Ahshyl Ulsvop

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Rjdpfx Ahexg Nnnovop Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer Redeyizqnspfx Ahvsp

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Rsdpfeh Dxqvex Ahvsp Nice condition

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Redpfx Ahjru Hvijvop

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Rjdpfx Ajxmkcmshvjp

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Rjdpfsx Sywasx Ahvsp

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Rsdpfx Aew Ttxfshvep Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Rjdpfxex Da Tis Ahvsp Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Year of construction: 2013, condition: excellent (used), 4.piece in stock Rodpfx Ajiicp Eohvop Water cooled switch cabinet cooler Fabr.PFANNENBERG Type:PWS 7412 Bj.2013. Price is for 1 piece.

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system Rjdpfjxtbcqex Ahvsp The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Rjdpfsyhlrmox Ahvep

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. Rodsxvca Aopfx Ahvop 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Year of construction: 2002, condition: excellent (used), DANTECH / OMEGA ice water cooler for glazing Liter: 700liter. Vessel dimensions: 131x90x60cm. Total goals: Rjdohg Tryspfx Ahvop Length: 215cm. Width: 105cm. Height: 270cm.

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs Rsdpfx Ahsxvqvfsvep • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.