Used Hydraulic Test Bench for sale (26,153)

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz Lsdpjndz Npjfx Ad Njrg combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm max. helix angle: 45 ° Lredpfx Asx Uzvvsd Neg

Condition: used, Technical specifications: Lsdpfoxw T Sfox Ad Njrg Max bending length: 4,100 mm Bending force: 400 Ton Maximum operating pressure: 300 Bar Approximate weight: 24,000 kg Minimum distance between photocell barriers and tools: 180 mm Motor power: 30 kW CNC control: Esa Machine compliant with CE standards.

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Lrjdpfxjx Ux Ivj Ad Nog Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Lodsd Ab Rcspfx Ad Njrg We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device Lrjdpod Ab Snofx Ad Neg - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 510messurements (LxWxH): 6300 x 2300 x 2590prebending: 35weight approx.: 33500 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Lrodpfxjd Ab N Us Ad Nog - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 7.000,-- - metarial feeding table EURO 3.700,-- - oil coiler EURO 800,-- - center support EURO 9.500,-- - side supports EURO 10.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Year of construction: 1999, condition: ready for operation (used), A hydraulic press brake Baykal is available. Press force: 120t, bending length: 3100mm, motor power: 11kW, operating pressure: 240bar, piston stroke range: 130mm-180mm, max. upper tool weight: 103kg, max. lower tool weight: 180kg, max. overrun time: 80ms, min. safety distance: 130mm. Machine dimensions X/Y/Z: approx. 3500mm/1450mm/2300mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Lrjdpfx Ajyb Scrsd Neg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 13 h, control type: CNC control, controller manufacturer: ESA, Equipment: european tool clamping system, lower tooling, safety light barrier, upper tooling, BENDING POWER 40 t CNC CONTROL ESA NUMBER OF AXIS 4 HOURS 13 bending length 1250 mm x axis travel 1000mm oil capacity 80 litres motor power 7.7 KW stroke 215 daylight 455 throat depth 410 table height 800 table width 60 length 2075 width 1700 height 2300 weight 3300kg Lredpoyb R I Hofx Ad Njg With 2x stop fingers, manually adjustable (R+Z axis) 1x split set of pointed tools - top 1x rotatable Multi-V die block SAFETY Side safety device (swivel doors) FIESSLER laser safety device Rear safety device (swivel door) 1x remote double foot control 2x front support arms Operating instructions INCLUDED

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex stock: EHT Hydraulic Guillotine Shear Lodpfx Adoyb Ry As Nsrg Type EHS 10 – 31 Year of manufacture: 1990 Cutting length: 3,100 mm Material thickness: 10 mm Electric backgauge: 10 – 1,000 mm Adjustable cutting angle: 1 – 4 degrees Hydraulic hold-downs: 16 units Strokes/min: 22 Drive: 15 kW Weight: 8 t Spare blades included Price: EUR 5,750.— plus VAT, ex location

Condition: used, total height: 2,750 mm, total width: 3,250 mm, total length: 3,100 mm, pressing force: 150 t, table width: 1,645 mm, table length: 3,000 mm, operating speed: 5 mm/s, overall weight: 6,000 kg, reverse speed: 30 mm/s, working height: 700 mm, stroke length: 500 mm, HYDROGARNE HYDRAULIC PRESS SERIES T Lodpfxeybbymo Ad Norg Model: T-150 STANDARD DESCRIPTION: Specially designed for straightening welded structures and oxy-cut sheet metal. Its design facilitates the loading and unloading of large-scale parts, sheets, or structures. It allows access to various pressing points without the need to move the workpiece, thanks to the lateral movement of the cylinder and the longitudinal movement of the press bridge. - Double-acting cylinder - Two-speed motorized hydraulic unit - Glycerine-filled pressure gauge with tonnage reading - Electrical panel with PLC - Operation via low-voltage pendant control station - Complies with and satisfies all essential health and safety requirements in accordance with CE standards. STANDARD FEATURES: MODEL: T-150 - Pressing force: 150 t - Motor power: 11 kW - Working speed: 5 mm/s - Approach speed: 9.9 mm/s - Return speed: 30 mm/s - Piston stroke: 500 mm - Lower table: 1,640 x 3,000 mm - Ram traverse: 1,150 mm - Bridge travel: 2,150 mm - Front opening: 1,700 mm - Vertical opening: 300 mm - Working height: 700 mm - Overall front: 3,100 mm - Overall side: 3,250 mm - Overall height: 2,750 mm - Weight: 6,000 kg

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm Lodox Urrhopfx Ad Njrg 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Lodpfx Adsx Uru Nj Norg stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Quantity: 1 piece still available -Piston diameter: approx. 125 mm -Piston rod: Ø 85 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1525 mm -Piston rod mounting: Ø 62 mm -Cylinder mounting: Ø 70 mm -Usable: universal -Dimensions: 1650/220/H150 mm -Weight: 140 kg Lrodsvpqpvjpfx Ad Neg

Condition: new, Pleiger hydraulic motor MO 300/200 Lodpfxox Uq Dco Ad Norg KM No. 6257639

Condition: good (used), Year of construction: 2012, machine/vehicle number: 6411107033, Offer 25483 Technical Specifications: - Cutting range at 90° round: 400 mm Lrjdpfxeybarzo Ad Neg - Cutting range flat: W 400 x H 400 mm - Shortest cut length: 6 mm - Smallest diameter to be cut: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic operation: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw blade dimensions: 5,700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min - Hydraulic lifting/lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Coolant system - Space requirement approx.: W 3,000 x H 2,200 x D 2,300 mm - Weight approx.: 2,200 kg

Condition: refurbished (used), Rexroth pump axial piston pump AKP140R with valve for ENGEL Lrsdpfx Aox Uqxasd Nog Type: AKP140R with valve Manufacturer number: R901021899 Type code: SYDFEE-20/140R

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit Ledpfx Ajx Up Igod Norg - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei no. 6249672 Ljdpfex T Aatox Ad Njrg

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references! Lsdpjx Twiiofx Ad Norg

Condition: new, sheet length: 3100sheet thickness: 13prebending: 10total power requirements: 15weight approx.: 10messurements (LxWxH): 4,88x1,16x1,18 Illustration Similar Roller diameter (top/bottom): Ø270 mm Bending length: 3,100 mm Maximum sheet thickness for normal bending: 13 mm Maximum sheet thickness for prebending: 10 mm Prebending / bending radius: 8 mm / 10 mm (radius calculated as Ød × 1.5) CE Standard Variable speed Control unit – 7 Touch Screen Conical bending Induction hardened rolls Side rolls positioning via electronically synchronized PLC Lsdpfx Aod Ab H Eed Njrg Bottom roll rigid mechanically synchronized Safety mechanism for welding on the machine Stress-relieved steel construction body Rolls seated with bearings Top roll hydraulic opening Top and bottom rolls driven by hydraulic motor and planetary gearbox Electrical and hydraulic overload protection Hydraulic pressure adjustable bottom rolls

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Lredpfxjya Hwze Ad Nsg

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), Ljdpoby Stpofx Ad Njrg €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information Ledpjya Ea Ijfx Ad Njrg - Specification - Back stop - Roll shelf

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information Ljdpoya D Ikjfx Ad Njrg - Distance between table and press beam: 1,800 mm