Used Hydraulic Tapping for sale (15,313)

Condition: new, Year of construction: 2025, pressing force: 800 t, stroke length: 800 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guided slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed targeting reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered considering heavy industrial conditions. The frame and main supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise movement throughout the ram stroke. ⚙️ Standard Equipment • Steel construction with 8-guided slides in H-type press frame • Stress-relieved frame structure by vibration • Bronze Zr14 slide bearings • Welded joints approved with WPQR & WPS certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • DELTA 7” touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 800 • Type: Steel construction, 8-guided slide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 800 tons • Movable Table Size: 1500 × 2000 mm • Fixed Table Size: 1500 × 2000 mm • Parallelism Tolerance: 120 micron/meter • Perpendicularity Tolerance: 60 micron/meter • Stroke (Ram): 800 mm • Min. Clearance: 100 mm • Max. Clearance: 900 mm • Welded Structure Stress Relief: Vibration stress relieving • Welding Process: WPQR and WPS certified by TÜRK-AK (according to EN ISO 15614-1:2017; inspected by certified welding coordination engineers per EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 75 kW – IE3 • Main Pump: 70 cm³ – REXROTH or PARKER • Movable Table Fast Approach Speed: 150 mm/sec • Movable Table Drawing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approx. Press Height: 6000 mm • Approx. Press Width: 3350 mm Hsdpox N T Nkjfx Ag Ijnl • Approx. Press Depth: 2700 mm • Lower Table Height from Floor: 1450 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke. The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guided slides - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear Hnedjx N T Srepfx Ag Iel 📐 Technical Specifications – CHP 2000 - Type: Steel construction, H-frame body with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress-Relief: Vibration stress-relieved - Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 6300 mm - Approx. Width of Press: 3850 mm - Approx. Depth of Press: 2500 mm - Lower Table Height from Floor: 1500 mm - Main Fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 50 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-action working principle to provide controlled material flow for sheet forming, deep drawing, and stamping applications. The 8-guideway H-frame design ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, featuring a 150-ton main ram and 50-ton blankholder (cushion) capacity, is designed for precise and repeatable deep drawing processes. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Hydraulic oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, H-frame press body with 8 guideways Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Hjdpfx Asx N T U Heg Ienl Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certification accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding applications supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Advance Speed: 30 mm/sec Main Cylinder Inner Diameter: Ø280 mm – Ck45 Cushion Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton bottom cushion ram (pot), is specially designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved using vibration methods for long life and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable stroke control for both ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion (pot) - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame with 8 guideways - Body Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1:2017 (Welding applications are supervised by "welding coordination engineers" certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Spinning Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 Hnodpex N Uhbjfx Ag Ijl - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4400 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum, or stainless materials - Highly suitable for bending round materials and materials of various diameters - Bottom and side rolls are hydraulically driven up and down with direct linear movement - Protected against overloading - The top roll is driven by an electric motor and planetary gearbox. The bottom roll is driven by a cardan coupling system. Two rolls are driven - Position of the rolls can be easily read with three digital indicators - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation with a movable control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Complies with EU safety standards and has CE marking - User manual OPTIONAL EQUIPMENT - Remote support with NC control - Top crane (lift) for supporting large diameter bending - Hydraulic side supports for supporting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Stepless speed adjustment - Hydro-motor driven rotation - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Hnodpew Slxzefx Ag Iol Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg Hsdpfx Ajw Sl I Nog Isnl

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation Hnjdpfxjw Smb Rj Ag Iel * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. Hsdpfx Agsw Smfcs Ijnl * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Hodjw Smi Ijpfx Ag Ijnl Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings Hnjdpsxbzr Uefx Ag Iel * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 600 mm, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton four-column hydraulic deep drawing press is an industrial press solution developed for metal spinning, deep drawing, and precision pressing applications, featuring a robust four-column frame construction. The St52 grade steel construction frame undergoes stress relieving via vibration. This ensures high parallelism and vertical tolerance are maintained during prolonged operations. Ram and blank holder systems operate independently; stroke and pressure adjustments can be made precisely via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic equipment, an IE3 classified motor, and PLC control, the press delivers high efficiency, reliability, and long service life. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is an ideal solution for mass production, mold testing, and medium to heavy-duty deep drawing applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Fields of Application - Metal spinning processes - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 ton CAPACITY (BLANK HOLDER): 50 ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Vibration stress relief WELDING STANDARD: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BLANK HOLDER FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units Hnsdpfx Agjx N Ul To Isl APPROXIMATE PRESS HEIGHT: 3800 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm PRIMARY FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable from screen LINEAR DISPLACEMENT TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 70 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press designed for metal forming, deep drawing, and precision pressing applications. The St52 grade welded steel frame is subjected to stress relief via vibration, ensuring high parallelism and perpendicularity tolerances are maintained over extended operation. The ram and blank holder (pot) systems are operated independently, with stroke and pressure settings precisely adjustable via touchscreen control panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the system offers high efficiency and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 200 / 70 ton capacity, this model provides an ideal industrial solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Long-lasting, low-maintenance design Applications - Metal forming operations - Deep drawing applications - Die trial and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR grade COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Ton CAPACITY (BLANK HOLDER): 70 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (BLANK HOLDER): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: WPQR & WPS with TURK-AK accreditation – EN ISO 15614-1:2017 (EN ISO 14731) Hnodpjx N Umqefx Ag Isl MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec BLANK HOLDER FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 320 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY SPEED-UP CYLINDERS: 2 units PRESS APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm LOWER TABLE HEIGHT FROM FLOOR: 1300 mm MAIN CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 14.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends Hjdpjw Slcgefx Ag Ijnl - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame Hodpfx Agoxw Ebls Isnl * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Condition: new, Year of construction: 2025, power: 18.5 kW (25.15 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, table height: 965 mm, throat depth: 410 mm, working width: 4,100 mm, bending force (max.): 220 t, distance between stands: 3,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, STANDARD FEATURES CNC-controlled hydraulic press brake CNC control of Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo-motorized back gauge Back gauge travel distance: X axis: 750 mm R axis: 250 mm Back gauge system with ball screw spindles and linear guides Sliding type front support arms Manual crowning system (wedge type) Narrow European-style lower table European-style quick-release upper tool clamping system (Promecam type) Hjdpex Nqqrefx Ag Ionl High-precision linear encoders Standard upper punch (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4 grooves V: 16 / 22 / 35 / 50 mm) Front safety system with laser beam LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES 4 / 6 / 8-axis back gauge systems starting from X + R Extension of the X-axis back gauge travel up to 1000 mm Additional back gauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide lower table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet with air-conditioned cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (distance between lower and upper dies): 515 mm Throat depth: 410 mm Table height: 965 mm Back gauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/sec Working speed: 140 mm/sec Return speed: 10 mm/sec Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 300 H-Type Single Acting Hydraulic Press – 8-Guided Sliders General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity, industrial press solutions developed for sheet metal forming, straightening, assembly, and die-stamping applications. The 8-guided H-frame construction ensures that the high loads generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium to high tonnage production requirements. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and carrier components are stress-relieved via vibration methods. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to the preservation of precision over extended periods. ⚙️ Standard Equipment - Steel construction, H-type frame press with 8 guided sliders - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK with WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7'' DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of oil temperature and system status of the hydraulic unit via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components Hnsdpfox N T E Ejx Ag Isl 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified by TÜRK-AK with WPQR and WPS approval per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers in line with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 4400 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides maximum rigidity during the pressing process, while parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton lower cushion (pot) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting, reliable performance. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion (pot) - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination indicator - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-slide H-frame press Hnodpfx Agex N Uaqj Iol Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Certification: WPQR and WPS by TÜRK-AK accreditation EN ISO 15614-1/2017 (Welding procedures are overseen by certified “welding coordination engineers” per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Measurement: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways Hnsdpex N Uhzsfx Ag Iel General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length. Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance. ⚙️ Standard Equipment - Welded steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications — CHSP 600/200 - Type: Welded steel, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR grade - Slide Bearings: Bronze Zr14 - Capacity (Ram): 600 tons - Capacity (Cushion): 200 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement Hodsw Slf Uopfx Ag Ijnl TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Hodpfx Agjw Smhwe Isnl Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, working width: 2,050 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 38.5 kW (52.35 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly via hydraulic cylinders attached to the body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * Three digital displays allow easy reading of roll positions * Hydraulic opening head and automatic lifting shaft enable easy removal of the bent workpiece * Easy operation with mobile control panel Hjdpfxjxd S T Uo Ag Isnl * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Hnodpfx Aoxw Ecvsg Iel Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), stroke length: 310 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 985 mm, throat depth: 510 mm, working width: 4,100 mm, bending force (max.): 400 t, distance between stands: 3,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge-type) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-vee die • Backgauge X-axis distance 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Hedpjx Npalsfx Ag Ienl Machine Weight (kg) 22500 Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge-type) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 4,000 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increased speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller-equipped upper table movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retraction - Raising function for long sheets - ±0.1 mm positioning accuracy Ball support front table for sheet feeding Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special joint system requiring minimal maintenance Front squaring arms with scale, T-slot, and adjustable stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard plate (openable type) Front and side safety covers Foot pedal Movable control lever Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with sheet return function) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE-compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual central lubrication system Electric cabinet cooling system (air-conditioned) CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Light-duty guarding TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Hjdpfox Nqphox Ag Ionl Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge movement range (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure delivers maximum rigidity and stability during pressing operations, ensuring parallelism and perpendicularity tolerances are maintained. The CHP 1500 model, equipped with a large bolster, robust hydraulic system, and high stroke capacity, provides a reliable solution for sectors such as automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved by vibration, guaranteeing long-lasting and stable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press structure • Vibration stress-relieved main frame • Bronze Zr14 slide bearings • WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Operator safety protection systems • SIEMENS/SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Bolster Size: 1500 × 2400 mm Fixed Bolster Size: 1500 × 2400 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Hsdpfxox N T R Us Ag Ijnl Stress Relief: Vibration stress-relief Welding: WPQR and WPS certified by TURK-AK, EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6250 mm Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.