Used Hydraulic Shears for sale (16,144)

Condition: used, Year of construction: 1987, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable max. 750 mm Control konv. engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm maintained condition (!!) Ihodpfxjxab Aqj Ah Not Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF)

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm Iodpfxoxacfae Ah Nsht from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: used, Year of construction: 2008, sheet width 4100 mm plate thickness 6.0 mm Ihsdow U U T Tspfx Ah Not thickness at "Niro-steel" 4.0 mm no. of strokes 12 - 24 Hub/min cutting angle 1 ° 30 work height max. 865 mm back stop - adjustable 1.0 - 1000 mm down holder 20 Stück Control ENC 100 M column arm 50.0 mm oil volume 200 ltr total power requirement 15.0 kW range L-W-H 5230 x 2250 x 2150 mm weight 11460 kg New price ~ 50,000 euros (!!) Special price on request ----- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch - operating instructions Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment Ihjdoxaaghopfx Ah Nst - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4,1 x 2,2 x 2,19 m ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears Ijdpfx Aoxabcqsh Noht - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting Iedoxabzgspfx Ah Njht - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: Isdpexab I Hefx Ah Nsht - pneumatic sheet metal holding device

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm Iodpfx Ahexaa I Ss Nsht total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 Hub/min oil volume 310 ltr. cutting angle 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 12200 kg range L-W-H ca. 4100 x 2300 x 2235 mm ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears Ihsdoxaa U Sopfx Ah Net - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam Iodpfxsxabd Uj Ah Njht - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° Ihodpfxjxaadae Ah Njt throat 350 mm table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: new, sheet width 2100 mm plate thickness 6,0 mm ST 42 thickness at "Niro-steel" 4,0 mm VA cutting angle 1,2 Grad no. of strokes 28 Hub/min oil volume 150 ltr. down holder 11 Stück control CYBELEC CybTouch engine output 11,0 kW back stop - adjustable 1.000 mm table height 800 mm weight 4.500 kg range L-W-H 3.010 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Iodoxaa Acopfx Ah Noht Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 4100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 18 Stück no. of strokes 15 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC Cybtouch back stop - adjustable 1000 mm work height max. 800 mm engine output 11,0 kW weight 8.100 kg. range L-W-H 5000 x 2410 x 1650 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment Ihedpfx Ahexaa R Ts Njt ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Iedpexabikofx Ah Neht Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW Ihodpfx Ahoxabvqs Not weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, sheet width 2600 mm plate thickness 8,0 mm thickness at "Niro-steel" 5,0 mm down holder 12 Stück Ihjdjxab D Iepfx Ah Not no. of strokes 18 Hub/min oil volume 200 ltr. cutting angle 1,5 ° engine output 15,0 kW weight of the machine ca. 6.300 kg range L-W-H 3525 x 2350 x 1700 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation Ihodpfx Ahjxab Rue Njt * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar Ihsdpfx Aoxab Tveh Nst voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW Iodpfexaci Eex Ah Njht weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop Iedpfsxaag Uex Ah Nsht * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg Ihsdpjxaa Dgofx Ah Not range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis Ihedpsxaa Rgjfx Ah Njt * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot Ijdjxmakgjpfx Ah Njht - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch Ihodpfoxrgv Tjx Ah Njt - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear Isdpfx Ahexn Tx He Nsht - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks