Used Hydraulic Ramp for sale (16,825)

Condition: ready for operation (used), Year of construction: 1965, Immediately available ex site: Hydraulic C-frame press WMW Zeulenroda Type PYE 160 S Year of manufacture: 1965 Completely overhauled in 2006 Press force: 160 t Table: 900 x 620 mm Itedpfx Afjxn Rx Djien Distance table – ram: 800 mm Ram stroke: 500 mm Ram down (rapid traverse): 200 mm/s Ram up: 125 mm/s Drive: 17.5 kW Weight: 8.5 t Price: EUR 4,000—plus VAT, ex site

Condition: used, Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, total height: 4,200 mm, table height: 700 mm, total width: 3,000 mm, total length: 2,000 mm, pressing force: 1,200 t, table width: 3,000 mm, table length: 2,000 mm, overall weight: 60,000 kg, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, type of input current: three-phase, distance between stands: 2,200 mm, stroke length: 600 mm, oil tank capacity: 700 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,000 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Ijdjxn Rvcjpfx Afijtn

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Itsdpfx Afexn Rhroijn Weight: 20,000 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF) Itedpfx Aoxmakgofijn

Year of construction: 2023, condition: new, A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us Itjdpophnygjfx Afijn

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm Ijdexl Tmfopfx Afiotn The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: ready for operation (used), Year of construction: 1973, Immediately available from location: Itedjxn Rw Tepfx Afisn Hydraulic press brake Lotze Model PZ 125 Year of manufacture: 1973 Pressing force: 125 t Working length: 3500 mm Distance between uprights: 2500 mm Throat depth: 250 mm Stroke: 175 mm Installation height: 400 mm Back gauge Drive: 10 kW Weight: 10 t Complete set of tooling Price: EUR 6,000—plus VAT ex location.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t Itsdpou Rni Hefx Afion dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm Itedsxl Rz Topfx Afion -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Condition: used, Year of construction: 1997, operating hours: 11,432 h, CE mark: yes Serial number: 22e500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20703 Specifications: - 1997 model - 11432 hours - 7600 kg - 50kW - Machine width: 205 cm Itedpfx Afowqwqujijn - Manual quick coupler - Undercarriage (see pictures) - Extra hydraulics - Services done myself - Sweating on hoses - Sweating on cylinders - Air conditioning - Radio - Lights - Ready for delivery Description: We have a 1997 Komatsu pc75 excavator w/ Hydraulic sanding bucket, cleaning bucket and trench profile bucket for sale. The machine is from 1997 so there are errors and deficiencies. It sweats a little hydraulic oil from the hoses and all cylinders. There is also some slack. The cutter needs to be welded or replaced. (see pictures) In addition to this, it is starting to function as it should according to the owner. (see video) Ready for delivery Hours: 11432 Own weight: 7600 Total Weight: 7600 Width: 205 Kw: 50 CE: Yes Model: PC75

Year of construction: 2023, condition: new, Galen hydraulic breakers are user-friendly and tailored for all excavator sizes and models. Prioritizing breaking capability, Galen Breakers' high efficiency ensures rapid, safe, and productive operations. They are fuel-efficient due to their low flow/pressure design. Available in both small and medium variants, we offer 8 models weighing from 125-2750 kg, compatible with excavators from 1.5-30 tonnes. Iedpfjpl Ei Eex Afistn For detailed information and price inquiry please contact us

Condition: good (used), mileage: 997,271 km, power: 331 kW (450.03 HP), first registration: 11/2014, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 3,700 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, spoiler, = Further options and accessories = - Aluminium fuel tank - Roof spoiler - Dual fuel tanks - High beam headlights - Low noise - Tipping hydraulics - Refrigerator - Air suspension - Metallic paint - Sleeper cab - Auxiliary heater - Toolbox - PTO (Power Take-Off) = Remarks = Scania R450 LA4x2MNB Highline 11-2014 997,271 km Retarder Full air suspension PTO hydraulic = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Transmission Transmission: Opticruise, 12-speed, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 7,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30% Rear axle: Tyre size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Tyre tread inside left: 40%; Tyre tread outside left: 40%; Tyre tread inside right: 40%; Tyre tread outside right: 40%; Reduction: single reduction Weights Itsdpfx Aoxn A T Tofien Unladen weight: 8,688 kg Payload: 11,812 kg Gross vehicle weight: 20,500 kg Functional Body brand: Scania Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: ready for operation (used), Year of construction: 1986, Immediately available from site: Hydraulic guillotine shear LVD Model MVN 31/8 Year of manufacture: 1986 Cutting length: 3100 mm CNC-controlled backgauge: 750 mm Drive motor: 10 kW Iedpfx Aexn Rwtjfiotn Weight: 8 t Spare blades included Price: EUR 5,750 plus VAT, ex location.

Year of construction: 2013, condition: ready for operation (used), Injection Unit Screw diameter 30 mm Stroke volume 85 cm³ Injection pressure 2000 bar Itedpfjxl H Amex Afion Additional Equipment Machine handling is included. This Arburg Allrounder 270 H 350-70 was manufactured in 2013. It features a screw diameter of 30 mm, a maximum injection pressure of 2000 bar, and a nozzle lift-off stroke of 210 mm. With 20,000 operating hours, this hydraulic injection moulding machine includes machine handling. Consider the opportunity to buy this Arburg Allrounder 270 H 350-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 Itjdjxl Rzgopfx Afion -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total height: 2,300 mm, installation height: 400 mm, total width: 1,620 mm, total length: 2,240 mm, pressing force: 61 t, table width: 450 mm, table length: 450 mm, overall weight: 3,800 kg, ram plate width: 160 mm, ram plate length: 160 mm, type of input current: three-phase, stroke length: 150 mm, input voltage: 400 V, Equipment: documentation/manual, DR. Fritsch DSP 515 Pressure Sintering Press Machine Type: Pressure Sintering Press Year: 2008 Condition: Very Good. Decommissioned Includes Manual Technical Specification Main Cylinders: 1 Cylinder Diameter: 160mm Cylinder Stroke: 150mm Piston Rod Diameter: 140mm Effective Pressing Surface: 201.1cm2 Auto Pressure Control: 60-603kN Internal Dimensions: 450 x 450 x 400mm Self Baking Electrodes Dimensions: 180 x 180 x 60mm Inner Width of Electrodes: 145mm Temperature Range: 0-1,100 Deg C Sintering Mould Height: 60-120mm Sintering Surface: 150cm2 Total Connected Load: 155kVA Total Supply Voltage: 3 x 400V 50/60cps Total Nominal Current: 3 x 224A Operating Voltage: 3 x 400V 50/60cps/ 1 x 230V 50/60cps Iedov Rz Ifspfx Afistn Control Voltage: 24V DC Cooling Water Consumption: 120-150L/min Water Quality: Drinking Water Recommended Water Supply Temp: 15 - 25 Deg C Water Pressure: 2-4 Bar Differential Pressure: 1-2 Bar Compressed Air Consumption: Approx. 20L/min Air Pressure: 4-6 Bar Protective Gas Consumption: Approx. 300-1000L/h Gas Pressure: 1-5 Bar Dimensions: 2240x1620x2300mm Weight: 3800kg

Year of construction: 2020, condition: new, Layout: Shears Attachment suited for: Construction machines Reinforcing Bar Cutter / Column Breaker Railway Rail Shear (cuts even old type cast rails) Tree Cutter Price is representative, for detailed infomation please contact us. As a knife, we can use high quality imported knives according to your request. Itjdpfx Afjpa Rtmoisn Jaw spacing can be adjusted according to the width of the column you demolish

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Iedji Dnpxjpfx Afistn Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Itodjxn Np Iepfx Afijn

Year of construction: 2010, operating hours: 65,320 h, condition: ready for operation (used), Control Unit Iodpfow Ih Tyex Afiotn Model MC5 3.6 This Krauss Maffei 800-6100 MX was manufactured in 2010. A hydraulic injection moulding machine with a clamping force of 800 tons and a screw diameter of 105 mm. It has a working capacity of 6,100 cm3, operating for 77,977 hours. Consider the opportunity to buy this Krauss Maffei 800-6100 MX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece Ijdpfx Afevviggsijtn

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Ijdpfx Aexl H D Refietn Clamping force 4200 Kn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Itjdpfx Afjxl H Dwjisn Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 Kn Itsdpfx Aexl H Dqsfijn This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2000, operating hours: 111,000 h, condition: ready for operation (used), General Data Machine weight 16000 kg This Krauss Maffei 350-1900 C1 was manufactured in 2000. A robust hydraulic injection moulding machine with a clamping force of 300 tons and a screw diameter of 70 mm. It has a working capacity of 1,900 cm3 and weighs 16,000 kg. Consider the opportunity to buy this Krauss Maffei 350-1900 C1 hydraulic injection moulding machine. Contact us for more information. Itodpsw Ih Udsfx Afien Application Types Injection Moulding