Used Hydraulic Ramp for sale (16,638)

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Djdpfx Aex D Sxqjb Tocr Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min Dcedpfx Ajv Auxusb Tjr -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: good (used), Karl Tranklein ZP Combi hydraulic bookbinding press The device is ready to work. The press has a built-in hydraulic unit. Two independent stations. A single station surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc. Dedpfxowxtd Tj Ab Tecr The machine is equipped with photocells, additional safety features.

Condition: used, Year of construction: 2004, operating hours: 5,913 h, machine/vehicle number: 03104313, fuel type: diesel, Weights Empty weight: 15.500 kg Functional Mast: articulated arm Lifting capacity: 1.000 kg Working height: 2.300 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 5.75x2.5x3.2 Dcsdpfx Abjx Dqpuj Ter Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2000, condition: good (used), Hydraulic machine vice Make BUSCH Type:V2 HY 94. Djdehcipkspfx Ab Tjcr

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Dcjdpfx Ajvzxrpob Tjr with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 1995, condition: ready for operation (used), General Data Machine weight 13500 kg Measurements height 2300 mm Dimensions Machine Length 6400 mm Dcjdpfxjx D Dn Rs Ab Tjr This DEMAG Ergotech System 250 - 1450 was manufactured in 1995. A robust hydraulic injection moulding machine, it features a clamping force of 2500 kN and a screw diameter of 70 mm. It's equipped with a Sepro robot, energy-saving DFE hydraulic control pump, and a modular design for versatile applications. The machine dimensions are 6.4 × 1.9 × 2.3 m, and it includes a comprehensive operator terminal with a 10-inch LCD display. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shears -Piston rod: Ø 140 mm -Stroke: 170 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 270/270 / H565 mm -Weight: 326 kg / pc. Dedpfegxcubox Ab Tecr

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dcodpexmvaqofx Ab Tor Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Empty weight: 1.000 kg Dimensions (LxBxH): 176 x 77 x 183 cm - Documentation available: No - CE certificate present: No - Transport dimensions: 1760mm x 770mm x 1830mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information Dsdsx Dkiuepfx Ab Tecr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Punching force 200 kN throat 560 mm Tools up to 100 mm Dcedpfsqwg Acjx Ab Tor Die thickness: 0.5 to approx. 10 mm. Further data see data sheet .

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm Djdpfx Abovzxq Ss Tecr power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Dcedpfex D Nrbex Ab Tor Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), I will sell a set of hydraulic rescue tools Lukas. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Dcsdpfx Absv Dx Ays Tjr - Price given for 1 complete set.

Condition: new, Year of construction: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Dodpfx Asfh R Nyob Tocr Interior light : mm 1,010

Condition: ready for operation (used), Hydraulic lifter 1000t, hydraulic cylinder, hydraulic power unit Power Unit Manufacturer : Barabás Mérnökiroda Kft Type : PHHTT Weight : 850 kg Year : 2017 Overall dimensions : 1240 x 770 x 1560 mm Performance : Dcsdpfx Aex Da A Deb Ter 350 bar, 11 kW, 2800 l/min Lifter Manufacturer : Schiess Defries Type : 172 | 18442168 Pressure : 450 bar Stroke : 150 mm Load capacity : 1000 t

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Djdpfx Asmx Slzjb Tscr Clamping pressure :90 Bar In very good condition .

Condition: used, functionality: fully functional, Year of construction: 1988, Simat hydraulic guillotine shears type 3100/6.35 Dsdpfx Asx Daxfob Tscr working width 3100 mm maximum sheet thickness 6.35 mm motorized back gauge

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Dcedox D N E Iopfx Ab Tor Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Sell Hurst hydraulic rescue tool kit - Hydraulic shears. - Arm spreader. - Hydraulic pump. Dcodpevgnudsfx Ab Tor

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 1,000 kg, empty load weight: 410 kg, construction width: 1,600 mm, Bulk material bucket Dodpfx Aovcf Rusb Tscr ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we will also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.

Condition: good (used), Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Dcodpsx A Hkrsfx Ab Tsr Fits to following machines: CW 45 Compatible Excavators Bucket type: Excavator bucket Delivery terms: EXW Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Dcedpfx Aox D Rlieb Tsr Application Types Bending

Condition: excellent (used), I sell a set of hydraulic tools for rescue Lukas. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Dedpfx Absvgnq Se Tscr

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Dedex D Rg Tspfx Ab Tecr Mould height min 250 mm Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding