Used Hydraulic Punch for sale (16,114)

Condition: new, Hydraulic, mobile hole punching machine model PP50 For punching sheet metal, flat steel and steel profiles Technical data: punching force 500 kN Gkedpfxjfdgido Ag Dsf Max. Punching capacity Ø 27 in 13 mm Throat 130 mm Engine power 2,2 kW Stroke rate with 20 mm stroke 25 min maximum stroke 30 mm Weight 295 kg Standard version or press version available

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Gksdpfx Agern Swko Dsf Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam Gjdpfx Ajx Hqnljg Dekf • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Gkedpfsvgnr Aox Ag Dsf - Hydraulic pump.

Condition: ready for operation (used), functionality: fully functional, operating pressure: 12 bar, pressure: 28 bar, oil tank capacity: 200 l, Parameters Manufacturer: Howden Power A/S (Denmark) / PMC Technology A/S Model: BTVAB-7 (Hydraulic Oil System for BTV-7) Year of manufacture: 2007 Pumps: 2 × 5.5 kW motors, 1410 rpm Flow rate: 12 cm³/rev Operating pressure: 12 bar Maximum pressure: 28 bar Oil tank capacity: approx. 150–200 L Filtration: Magnehelic pressure differential gauges, multi-stage filtration Piping: Stainless-steel hydraulic lines Configuration: Dual-pump system (duty + standby) Condition: Structurally sound, fully complete Origin: Elektrėnai Power Plant (Lithuania) Application: Lubrication and hydraulic actuation for BTV-7 bearings and mechanisms Fully equipped Howden / PMC Technology hydraulic oil system, designed for lubrication and hydraulic control of heavy-duty industrial bearings and damper mechanisms. The system includes two hydraulic pump motors, complete stainless-steel piping, pressure control blocks, flow meters, and Magnehelic filtration indicators. Gkjdpfx Aexy Hk Teg Djf Originally part of the BTV-7 booster draft fan set at Elektrėnai Power Plant and used only intermittently. Mechanically intact, ready for recommissioning after basic cleaning and servicing. Suitable industries: Power plants Biomass & waste-to-energy plants Petrochemical & refinery applications Steel & heavy industrial facilities Industrial ventilation & draft systems Any operation requiring high-reliability hydraulic lubrication units

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 25/11/2025 2000 tons press hydraulic Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Gsdpfxow Hridj Ag Dokf Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 144.5 tons YOM: 1986

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Gkedpfoxqgv Dox Ag Dof Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Gkodpfx Aev Dm Epog Def

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Gksdpsx A Sd Dofx Ag Dof Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Gjdpfx Agsvgntte Dokf

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Gedscmat Uopfx Ag Djkf Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: good (used), Press machine, hydraulic press, used machine Gjdpfjt A U Irex Ag Dokf Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t Gkodpfx Ajtndu Usg Dof CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Gsdpfx Asuzv Tzsg Djkf Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch 500 Perforator This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Gedpfjx A Sd Rex Ag Dokf Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Gkjdpfsvgnhwex Ag Def

Condition: used, Demanders hydraulic vise, Gedpov Rnwmjfx Ag Djkf

Condition: like new (used), operating pressure: 152 bar, power: 11.77 kW (16.00 HP), Hand starter, two-cylinder, with four-stroke engine Operating pressure: 152 bar Engine performance: 16 LE Godpfotp Hafex Ag Dskf Overall Size: 1150 x 600 x 900 mm Condition: New Like

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 Gkodpecqxv Tjfx Ag Dof 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Gksdpfx Agowunlds Def Dimensions 1520 x 1400 x 1370 mm

Condition: excellent (used), mileage: 1,072,895 km, power: 368 kW (500.34 HP), first registration: 11/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, fridge, power assisted steering, retarder, spoiler, = Additional options and equipment = - Aluminium fuel tank - Heated mirrors - Brake booster - Roof spoiler - Tipping hydraulics - Air conditioning - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Preheating automatic system - Power take-off (PTO) = Notes = TRANSPORT TO ANTWERP 390 EURO Gkjdpex Hrt Njfx Ag Def = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: Parabolic springs Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: Air suspension Unladen weight: 8,528 kg Technical condition: very good Optical condition: very good Reference number: 91

Condition: good (used), mileage: 782,389 km, power: 331 kW (450.03 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, air conditioning, airbag, cruise control, electric window regulation, fog lights, fridge, parking heater, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.891 kg Carrying capacity: 11.109 kg GVW: 19.000 kg Gkodpfox Dbkvox Ag Def Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), mileage: 111,669 km, power: 368 kW (500.34 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 29,500 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, power assisted steering, retarder, seat heater, second fuel tank, = Further options and accessories = - Bluetooth - Speed limiter Gedpfx Agexr Upbo Dekf - Air conditioning - Air-suspended seats - Reversing camera - Sleeper cab - Side skirts - Warm-up automatic system - Xenon lighting = Further information = Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 1: Max. axle load: 11,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Differential lock; Max. axle load: 7,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Technical condition: Very good Damages: None Contact Job van Eldik for further information.

Condition: used, mileage: 428,881 km, power: 537 kW (730.12 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 7,150 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Equipment = - Roof spoiler - Differential lock - Double glazing - Remote central locking - Tipping hydraulics - LED headlights - Leather interior - Air suspension - Engine brake - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater / parking heater = Remarks = Scania S730 6x4 - Full air suspension - Retarder - Adjustable fifth wheel - Hydraulic - 24V NATO plug - Leather seats - Heated and ventilated driver's seat = Further Information = Technical Details Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering axle; Tire tread left: 60%; Tire tread right: 60% Rear axle 1: Twin tires; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 30%; Tire tread right outside: 30% Rear axle 2: Twin tires; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60% Weights Unladen weight: 10,575 kg Payload: 19,425 kg Gross vehicle weight: 30,000 kg Interior Gkedpfxsx Dc Ayj Ag Dsf Upholstery: Leather Identification Model number: S730 V8 6x4 / HYDRAULIC / FULL A = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide correct information; however, no rights can be derived from the given texts.

Condition: excellent (used), mileage: 614,372 km, power: 330 kW (448.67 HP), first registration: 05/2018, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,100 mm, total width: 2,500 mm, total height: 3,650 mm, Year of construction: 2018, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) Gkedpex Ed R Usfx Ag Djf = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Tyre size: 315/80 R22.5 Front axle: Steered; Suspension: Parabolic springs Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 7,451 kg Technical condition: very good Visual condition: very good Reference number: 1