Used Hydraulic Profile Bending Machine for sale (74,847)

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 ° Rodsyv I Tdspfx Adrjw    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls Rodpfxeyvvpye Adrjw

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw Redpozh N Uwjfx Adrjw

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg Rjdpjy H N Nzjfx Adrow dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm Rjdpoyvvrhjfx Adrjw roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm Rodpfxoyvvnij Adrsw I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Rsdpfx Adszh I Iijrsw Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side Rjdedfx Hcepfx Adrew 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm Rjdpfxebahd Ee Adrow

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW Redpfozh H A Eex Adrew - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Redpfsyhgkdox Adrow Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: used, Year of construction: 2021, total length: 4,000 mm, total width: 1,200 mm, total height: 1,750 mm, overall weight: 1,000 kg, power: 7.3 kW (9.93 HP), No. 04539 Profile sanding machine / automatic edge processing machine Rehnen KBA Used, year of construction 2021, low operating hours Profile sanding machine / automatic edge processing machine for sanding edges, routing profiles and sanding profiles in through-feed operation Materials to be processed: solid wood, chipboard and MDF Fields of application: stair construction, furniture production, shopfitting, interior finishing, etc. Material thickness up to approx. 90 mm, centrally adjustable by handwheel Variable feed speed up to 6 m/min Total power 7.3 kW Redpfjzhbzcex Adrjw Pneumatically controlled and tracing profile sanding shoes with standard sanding belts Longer belt life due to long sanding belts and pneumatically height-adjustable oscillation High material removal thanks to calibrating roller - Continuously adjustable oscillating sanding unit (between 30 - 130 mm) / sanding and fine sanding via contact roller and sanding shoe / sanding belt size edge 2000 x 150 mm - 2 routing units with profile cutters 50 x 10 x 16 mm, Z4 / routing of radii, profiles and chamfers on top and bottom at 12000 rpm / controlled via frequency inverter - 2 profile sanding units for profile sanding with endless sanding belts via application-controlled, air-cooled steel profile sanding shoe / sanding belt size profile 30 x 1960 mm - Extendable roller conveyor at the front - Extraction connection diameter 160 mm - Workpiece feed via chain plate conveyor Transport dimensions approx. 4000 x 1200 x 1750 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Rjdpfx Ajzibvpodrjw Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Rjdpowrrhwsfx Adrew Used Machine Internal Code: Svr 317

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Rsdpfjy E Twaex Adrsw Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Rodpfx Aoy Rh Rfedrsw Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Overall dimensions: Width: 660 mm Depth: 850 mm Height: 830 mm Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Rsdpfx Aey R A Nijdrew Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. Rodpszaq Dlofx Adrjw MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Rsdpfx Aewhmv Uodrsw Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Year of construction: 1994, condition: ready for operation (used), A modular profile and edge belt sanding machine is offered for sanding solid wood and veneered edges in continuous operation. Feed rate: 5-25m/min, Units: 5, Workpiece thickness range: 12mm-60mm, Conveyor chain: 80mm, Sanding belt length: 2000mm, Sanding belt width: 20mm/35mm, Belt speed: approx. 7m/s, Max. working radius: 12mm. Machine dimensions: approx. 2670mm/1200mm/1800mm. Weight: approx. 1200kg. Documentation available. Inspection possible by appointment. Rjdpfjzh Nihex Adrow

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Rodpszhw Tujfx Adrjw

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Rodpfxjw I Unko Adrew Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Rodpfszgci Eox Adrow Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, CNC Rebar Bending Machine – GW45 | Ø 6–32 mm | 4 kW | 24 Month Warranty CNC-controlled rebar bending machine for medium to heavy-duty reinforcement steel processing. The GW45 is equipped with a large 360 mm turntable and is capable of bending rebar with diameters from 6 to 32 mm. Its compact and mobile design is ideal for both workshop and on-site applications. Key Specifications: • Rebar Diameter: 6–32 mm Rsdpfxjy Swpgj Adrjw • Turntable Diameter: 360 mm • Motor Power: 4 kW • Power Supply: 380 V • Machine Weight: 270 kg • Dimensions: 880 × 850 × 800 mm ✅ CNC control – programmable bending angles ✅ Large 360 mm turntable for heavy-duty rebar ✅ Compact & mobile – suitable for on-site applications ✅ All spare parts in stock – motor, bending discs, control electronics ✅ 12 months warranty ✅ CE certified | Technical support available

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Redpszhkbfefx Adrjw Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining