Used Hydraulic C Frame Press for sale (73,375)

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Dksdoxu N H Hjpfx Adaek

Condition: not inspected (used), functionality: unexamined, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, table width: 460 mm, table length: 460 mm, travel distance Z-axis: 570 mm, pressure: 400 bar, 1 Hydraulic Press MUNARRIZ ; Maximum pressure: 400 bar Table dimensions: 460 x 460 mm Presser diameter: 180 mm Cylinder diameter: 180 mm Dodpfxext Hzfj Adajkk Approximate vertical stroke: 570 mm Manual drive Hydraulic pump IHBER; YOM: 2024 Included a J.ANGEL BACAICOA weightless manipulator Power of the pump motor: 15 kW Dimensions: 2900 x 2300 x 3000 mm Approximate weight: 1500 kg The machine has been working until May of 2025. Actually is dismounted and can not be tested. No warranty. The machine was reformed on 2024. All the hydraulic group was replaced by a new by the company IBHER in 2024 If the potential purchaser wants to see the machine operating this has a cost of 1.500 Euros ( Taxes not included )

Condition: good (used), Year of construction: 1990, throat depth: 700 mm, total length: 14,500 mm, total width: 4,200 mm, total height: 7,200 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Dksdpfx Adsyx Twyjajk Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Dodpfjyx Ttnex Adaskk Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1975, pressing force: 250 t, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Dsdpoyx Tqtsfx Adajkk Machine weight approx.: 16 t

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Dedpfed D Ryfjx Adaokk with various punching tools

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Dkodpfebnnyiox Adaok Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg in mobile version

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm Dkjdpfobb Tguex Adajk weight: 1800 kg

Condition: good (used), functionality: fully functional, pressing force: 25 t, stroke length: 500 mm, table width: 500 mm, table length: 500 mm, distance table to ram: 800 mm, total height: 2,700 mm, overall weight: 2,000 kg, Equipment: documentation/manual, Available for sale: Dksdpfexfzdlex Adask 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE Dksdpfopygydjx Adajk can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 1990, condition: used, PJ Hare 63.HP Hydraulic Clipping Press, Serial No. 90H9096, (1990) Location: This lot is located in Wolverhampton, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Location: These lots are located in Wolverhampton, UK. Please see individual lot for dismantling and loading charges. All/Any tooling is being offered as specifically described. Dsdeyx En Dopfx Adaekk

Year of construction: 1990, condition: used, PJ Hare 63.HP Hydraulic Clipping Press, Serial No. 90H9096, (1990) Location: This lot is located in Wolverhampton, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser Dkodpfjyx Eamjx Adajk Location: These lots are located in Wolverhampton, UK. Please see individual lot for dismantling and loading charges. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW Dkodpfxeh N Dqre Adask YEAR OF MAUFACTURER 2004

Condition: used, Year of construction: 1972, machine/vehicle number: 703, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 620 mm, table width: 1,200 mm, table length: 730 mm, table height: 1,160 mm, distance table to ram: 870 mm, clearance between the columns: 1,280 mm, oil tank capacity: 300 l, total length: 2,000 mm, total width: 1,600 mm, total height: 3,200 mm, overall weight: 11,280 kg, control cabinet height: 670 mm, control cabinet length: 300 mm, drop-through hole in table: 30 mm, working height: 1,160 mm, working range: 1,280 mm, Equipment: documentation/manual, Hydraulic Press GIGANT (Costruzioni Oleodinamiche) 200-ton, operational and available for sale. Machine equipped with drilled/slotted worktable for clamping and setups, complete electrical cabinet, and hydraulic system. Documentation available (manual/schematics). Main specifications: - Pressing force: 200 t - Overall dimensions (W×D×H): 1600 × 2000 × 3200 mm - Weight: 11,280 kg - Table height from floor: 1160 mm - Max opening (daylight): 870 mm - Min opening (daylight): 250 mm - Ram stroke: 620 mm (870–250) - Usable clearance between columns (X): 1280 mm - Usable clearance front/rear (Y): 600 mm - Usable working area: 1280 × 600 mm Table / clamping: - Through holes: Ø 30 mm - T-slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate data): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Dkodpfx Asyl Nrredaek Condition: used Documentation: yes (manual/schematics). Transport: at buyer’s expense, loading by seller.

Condition: used, Year of construction: 1950, pressure 120 t Dksdpfx Ajx Sr Evodask draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN Dkjdpfx Aelqwvkedajk CNC Back Gauge Quick Change Tooling

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: Djdjyv N Ngspfx Adaokk - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg Dkjdpoyv Ntfjfx Adajk dimensions of the machine ca. 1900x1000x2550 mm

Condition: new, pressure 180 t stroke 400 mm Djdpfxjyv I S Hj Adaskk column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: new, pressure 20 t stroke 150 mm dayligth 700 mm 500 mm Dkodjyv Nuvspfx Adaok 195 mm weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec Dksdpfx Aeyv Nm Sedajk total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever Dkodoyv Nd Depfx Adaek - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 160 t stroke 400 mm 1100 mm 350 mm feed down 6,2 mm/sec feed up 9,8 mm/sec total power requirement 6 kW weight of the machine ca. 1.300 kg dimensions of the machine ca. 1640x1000x2550 mm Accessories / equipment: - stable welded construction Dkodpfx Adeyv Ndqeask - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 80 t stroke 400 mm 930 mm 295 mm total power requirement 4,0 kW Dkjdpfxsyv Nbcs Adajk 7,4 mm/s 11,5 mm/s Heads 160x95 mm weight of the machine ca. 725 kg dimensions of the machine ca. 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Dkodjv Rwu Ujpfx Adajk Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation