Used Hub Spindle for sale (14,062)

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Hedpfx Adsxziuweajh Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Centre height: 240 mm Hedpfew S Ituox Adash Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Hedpot Ipi Isfx Adaeh Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Hsdpfx Aevkuaujdaoh Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. For further information see data sheets.

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Hedjx Hr Duepfx Adaeh Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 Hsdsu Rduropfx Adaoh With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm spindle bore: 65 mm Spindle speed : 18 - 900 rpm. Machine in good condition .

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Hsdpfx Aetttigsdaeh Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: used, Year of construction: 1996, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S Dnt Yob: 1996 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling configurable as 2x4 spindles, pick up preparing in positions 4 and 8 Thread cutting couplings Electronic cross slide adjustment in positions 1, 2, 5, 6; 2 independent feeds Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA40/42/P) Coolant tank with hinged chip conveyor Hsdpfxoydngls Adajh Control: Siemens S7-300 PLC Display device: Siemens Simatic HMI Delivery without BDE Tooling included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1997, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW Hsdpfjwl Nm Dsx Adaoh

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm Hodpfx Adsluhcgsash weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: good (used), Year of construction: 1963, stroke = 250 mm Hjdpfxsydlxfo Adaoh

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Hsdpfx Asxawctodaeh If you have any further questions, we are happy to assist you.

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Hedpjx I D Nlsfx Adaoh Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 Hodpfxoyddv Aj Adash If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Hjdpfx Adoyddvvjajh Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Hjdpfxjpq R Rds Adajh Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: excellent (used), mileage: 595,663 km, power: 427 kW (580.56 HP), first registration: 06/2017, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 6x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,400 mm, total width: 2,500 mm, total height: 2,550 mm, Year of construction: 2017, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, parking heater, power assisted steering, retarder, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Heated mirrors - Power brake booster - Differential lock - Tipping hydraulics - Air conditioning - Refrigerator - Air-suspended seats - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater Hsdpfx Ajyga R Uedaeh - Automatic pre-heating system = Remarks = TRANSPORT TO ANTWERP 590 EUROS = Further information = Axle configuration Front axle: Tire size: 385/65 R22.5; Steering; Suspension: Parabolic spring Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R22.5; Twin tires; Reduction: Outboard planetary axles; Suspension: Air suspension Weights Unladen weight: 9,517 kg Payload: 34,483 kg Gross vehicle weight: 44,000 kg Maintenance, history and condition APK (general technical inspection): Valid until 05/2026 Technical condition: very good Visual condition: very good Identification Reference number: 24

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The machine has hardly been used! Motorized height and tilt adjustment. Variable speed. Centrex cutter guard. Position-controlled fence. Fence 250 with fine adjustment and digital display. Quick-change spindle system. Integral fence jaws. Table extensions on each side, 670 mm. Pull-out frame with emergency stop. Motor power 7.35 kW. Feed unit with 4 rollers and stepless speed control. Hodoyf Hf Aepfx Adajh

Condition: used, Year of construction: 2001, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8756 - Main motor power [kW]: 7.5 - Table length [mm]: 2500 - Table width [mm]: 500 - Max. tool diameter milling head [mm]: 160 - Max. tool diameter pen cover [mm]: 160 - Motor braked: Yes - Feeding device present: Yes - Brand: Mec4v - Type: Mec4v - Number of wheels [pcs]: 3 Hodpfx Aewwa Hredaeh - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Options: Tenoning hood - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Incremental Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Hjdpfx Ajxp Skdedajh Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Hedsycq Ayjpfx Adajh Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake Hedpfoycqiyex Adaoh – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Hsdpfoycpwpsx Adajh Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Hsdpfxjyfxa Ee Adash

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm Hjdjxzuwwspfx Adajh reus 3.000/4.500/6.000/9.000 U/min