Used Hq 400 B for sale (52,831)

Condition: used, Crane magnet, lifting magnet BAKKER MAGNETICS Kedpexciwhjfx Ah Njdg Type: BM 400 Year of manufacture: 1998 Load capacity: 400 kg Magnet surface size: 190 x 155 mm Own weight: 36 kg With manual switching lever Crane ring eye for attachment Load capacity 400 kg at 0.0 mm distance to the material and minimum material thickness of 30 mm.

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance Kedjuayytspfx Ah Nodg - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle Ksdpfx Aouayy Teh Njdg EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AS4002/10, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Kedpju S E Umjfx Ah Nsdg

Condition: excellent (used), Year of construction: 2011, For sale: Meyn Rapid HQ in very good condition, regularly serviced. It is possible to see the machine in operation with product. TECHNICAL SPECIFICATIONS Type Rapid HQ Capacity up to 6000 bph Size 12x4x3m Brand Meyn Weight 6000 kg Year 2011 Product weight breast caps 350-1,200g Kdodpfxjwrh A Rj Ah Nog Electric power installed 9kW

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW Kedpfx Ahjya Hgpo Nsdg - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, This 4-axis SW BA 400-4 vertical machining center was manufactured in 2002. It features a Siemens 840D control system and two rotary tables, one reconditioned and one new. The travel paths include X 200 mm, Y 400 mm, and Z 400 mm. Consider the opportunity to buy this SW BA 400-4 vertical machining center. Contact us for more information about this machine. Machine Benefits Kdsdpfx Aeyaa R Ujh Nsg Technical Machine Benefits • Type: two rotary tables (1 reconditioned, 1 new)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. Ksdpfx Aox Uzb Eeh Nedg • Maximum workpiece weight: 800 kg • Tank length: 1195 mm • Tank width: 800 mm • Tank height: 400 mm

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - H : approx. 200 cm - D : approx. 80 cm - L : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 79.5 cm. - 240 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 7267,00 € net Kdedsya U H Repfx Ah Nog plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Kdjdpjya U H Djfx Ah Neg Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Kdjdpfxeya U E He Ah Nsg Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! Kodpfjya U Eyox Ah Nodg We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : Kdjdpfxeya U Ets Ah Nsg 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 80 cm, disassembled. - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : Kodoya U Emspfx Ah Nodg 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Main Motor Power: 12 kW Torque support: yes Kdodpfx Aeya Aimoh Njg 4th axis - C-axis 5th axis - Aggregate interface Tool clamping system - HSK-F63 Tool changer positions - 14 Number of exchangeable units - 3 Vertical drilling spindles - 19 Horizontal X - 4 Horizontal Y - 2 Groove saw - 90° turnable Vacuum pump - yes Safety device - safety mat Control - Homag Power Control PC st Software - Homag Woodwop 5.0 Weight - 4,500 kg CE marking - yes Space required Length = 6580 Width = 4580 Two rows of stops Tool changing auxiliary device Workpiece support aids

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized Kdedpfx Aei Ri Daoh Nog

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t Kdodpfxjvuk S Ie Ah Njg speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse (with new electrical control) / Safety adaptations / overhaul can be offered additionally on request

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Drum ø: 400mm Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Kdedpfx Ahjn E Tubs Njg Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. Kdedpfxeyaiafo Ah Neg The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: excellent (used), mileage: 304,784 km, power: 249 kW (338.55 HP), first registration: 03/1998, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 6,200 mm, Year of construction: 1998, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, fog lights, retarder, = Further Options and Equipment = - Aluminum fuel tank - Air horn - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital tachograph - Spotlights - Power take-off (PTO) = Further Information = General Information Cab: single Technical Information Number of cylinders: 6 Engine displacement: 12,000 cc Axle Configuration Brakes: disc brakes Suspension: leaf spring Front axle: Tire size: 315/80 R22.5; Max. axle load: 7,500 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 1: Tire size: 295/80 R22.5; Max. axle load: 12,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Tire size: 295/80 R22.5; Lift axle; Max. axle load: 8,300 kg; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 13,400 kg Payload: 15,100 kg Gross vehicle weight (GVW): 28,500 kg Functionality Crane: HIAB 195 Condition Technical condition: very good Kdsdpfx Aeyabgdoh Neg Optical condition: very good Damages: none

Condition: used, empty load weight: 8,500 kg, maximum load weight: 31,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/2012, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! Kdedpfjxx A H Iox Ah Njg The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: excellent (used), Conventional lathe Inv. no. 3506 Ayel-Tech Model BT 400 * Turning length: 1000 mm * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck Kodpfx Aoxp Idgoh Nodg * Emergency stop * Change gears * Chip guard/rear panel * Documentation * 400V

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Kdsdpsvfy Sxefx Ah Nog Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Kdedpsv Rtg Tjfx Ah Nsg Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: good (used), mileage: 381,283 km, power: 345 kW (469.07 HP), first registration: 10/2014, fuel type: diesel, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, navigation system, trailer coupling, = Additional Options and Accessories = - Aluminium fuel tank - Speed limiter - Reversing camera - Sun visor flap - Power take-off (PTO) - Power take-off (PTO) Kedpow H A Rrjfx Ah Nsdg - Towing jaw = Further Information = Axle Configuration Front axle: Max. axle load: 10,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Max. axle load: 10,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 9,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Max. axle load: 9,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 4: Max. axle load: 10,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 22,295 kg Payload: 26,705 kg Gross vehicle weight: 49,000 kg Functional Crane: Penz 25Z9.60R, year of manufacture 2014, rear-mounted on chassis CE marking: yes Condition Technical condition: good Visual condition: good Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for further information.