Used Horizontal Turning Lathe for sale (15,075)

Condition: used, Oma lathe 1200 mm Genini 1200 mm lathe grinder Cgsdpfxezfyzvs Afmsw Conveyor belts for unloading lathes and loading automatic grinders

Condition: used, L + Z Lathe PRÄWEMA Machine No. 903 Year of manufacture 1968 Center distance 1000 mm Turning diameter over bed 400 mm Turning diameter over cross slide 240 mm Center height over bed 200 mm Center height over cross slide 120 mm Spindle bore 36 mm Feed longitudinal and transverse Chuck mounting Short taper DIN 55027 Size 6, 4x M12 Tailstock internal taper MK 4 Tailstock quill travel 120 mm Spindle speed 25 - 3000 rpm, 18 steps Drive power 4 kW Mains connection 380 Volt, 50 Hz Cedezc Nt Repfx Afmogw - Spindle speed via 18 gear stages - 3-jaw chuck RÖHM Ø 250 with a set of stepped jaws - Swiveling universal tool holder - Emergency stop button - Change gears Space requirement L x W x H 2100 x 850 x 1350 mm Weight 1260 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 20 C5Y2 Basic | Year of construction: 2020 The machine can be inspected by appointment under power. Condition: Fully functional, well-maintained / ready for use. Operating hours: approx. 19.498 h TECHNICAL SPECIFICATIONS: - Axes: 8 - Turning diameter over bed: 32 mm - Spindle bore: 20 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speeds: 8.000 rpm - Spindle motor: 5.5 / 3.7 kW - Tailstock bore: 20 mm - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (counter spindle): 240 mm - Clamping chucks 161E - Drive motor power: 5,5 / 3,5 kW - Total power requirement: 19,4 kW / 35 A - Machine weight: approx. 4,2 tons - Space requirements: approx. 8,0 x 2,7 x 2,2 m EQUIPMENT: - CNC-Control: FANUC 31i-B - 1 x counter-spindle - NC C-axis on main and counter-spindles - DM12 guideway - Tool holders for 5 fixed turning tool holders, Csdpfxey Sp Sme Afmsgw cross-section 12 x 12 mm - Bar loader, FMB Turbo model, Ø 3–36, year of manufacture: 2020 - Chip conveyor - Electronic handwheel - KNOLL high-pressure system (50 bar) with paper belt filter system - Fire protection system, Brand: Kraft & Bauer - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Year of construction: 2018 Cgjdpoy Sp Twjfx Afmsw The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW - Channel 2/Z2 > Turning length (counter spindle): 340 mm - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m ACCESSORIES / EQUIPMENT: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2008, CNC Swiss-type lathe Machine type: Citizen C-32 VIII 2M8 Year of manufacture: 2008 Cgedpfx Afoy D Spljmow TECHNICAL DATA: Main spindle Max. turning length: 320 mm Turning diameter: 32 mm Speed range: 200 - 8,000 rpm Sub spindle Speed range: 200 - 7,000 rpm Driven tools Equipment: Bar feeder: FMB turbo 3-36

Condition: good (used), Year of construction: 2006, CNC Swiss-type lathe Machine type: Citizen K 12 VII 1F7P Year of manufacture: 2006 TECHNICAL DATA: Main spindle Max. turning length: 200 mm Turning diameter: 12 mm Bar capacity: 12 mm Speed range: 15,000 rpm Max. front drilling diameter: 10 mm Max. front threading diameter: M8 Cgjdpfx Asy D Spxjfmsw Spindle diameter: 16 mm Max. sub spindle machining diameter: 12 mm Max. sub spindle machining length: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool carrier, number of tools: 8 Speed of driven tools: 6,000 rpm No driven tools available for back machining.

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Cedjvivx Nspfx Afmjgw Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 Cgjdpfx Afsx Iriasmsw - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Four-jaw chuck, Three-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, Equipment: documentation/manual, EQUIPMENT: FANUC 31i control system Back-end machining Synchronous spindle Powered tools C-axis Cgjdpszcdbiofx Afmsw Part conveyor Oil mist extraction system Fire extinguishing system Bar feeder magazine FMB TURBO 3-36

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdpewnhf Rjfx Afmsgw Lukas van Rossum

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet Codjzb U Epjpfx Afmsgw 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, machine/vehicle number: 0680 0000521, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel range X-axis: 800 mm Travel range Z-axis: 300 mm Speed range main drive: 20 - 5,000 rpm Speed range C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque main drive: 200 Nm Torque at the spindle: 240 Nm Torque clamping device: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Tools and tool magazine Number of positions in the tool magazine: 12 Speed of powered tool max.: 6,000 rpm Tool holder: VDI 40 Clamping area in the work area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Power main spindle: 27 / 20 kW Total power consumption: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Power chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (rotating) Codpfxezb Efgj Afmogw

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Cgjdpfozdu Dpsx Afmew Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Cgjdpfxozdqdfj Afmjw Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm Cgjdpfxovivygs Afmew turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 2,800 kg, type of input current: three-phase, input voltage: 200 V, Equipment: bar feeder, documentation/manual, We offer this like-new CITIZEN BNA-42S2 automatic lathe, manufactured in 2023, complete with a feeder. Model: BNA-42S2 Factory number: BNAS2P/3151 Serial number: DJ0667 Date of manufacture: 2023.01 Rated current at full load: 81 A Rated power: 28 kVA Short-circuit interrupting current: 2.5 kA Weight: 2800 kg Supply voltage: AC 200 V, 3 phases, 50/60 Hz Cgedpfszdd Dmex Afmjw If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Cgsdpfxsx Ig Ike Afmjw Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Z1 axis: 235 mm Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Fuse: 81A Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Total power consumption: 66 / 75 kW Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication - In-process quality control - Central coolant supply (not included) - Chip conveyor Cgsdezdbv Topfx Afmjw Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Technical features & accessories: - Open automation - Safety device Cedpfjzdbtxox Afmegw - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC vertical turning lathe Manufacturer: EMAG Cgjdszdbtfjpfx Afmow Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, LATHE FOR EDUCATIONAL USE For sale is a Drechselmeister Stratos FU 230 LV (long version) lathe with a center distance of 1,000 mm. The machine is in very good condition – it is a lathe used for educational purposes and has few operating hours. Therefore, it comes with a full warranty. Technical data: - Center height 230 mm - Swing diameter 455 mm (with optional external turning attachment 800 mm!) - Center distance approx. 955 mm for the SPECIAL MODEL STRATOS FU-230 LV (can be extended further with an optional extension table!) Cjdpfx Afewud Izomogw - Spindle connection M33 x 3.5 (hardened) with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor 2 hp (connection 230 V) - Weight SPECIAL MODEL LV 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT. Germany: € 125.00 incl. VAT. South Tyrol: € 150.00 incl. VAT. Related terms: Lathe, turning machine, machine tool, wood lathe, turning, lathe tool, woodturning, machining, machine Reference: 5912

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm Cgjdjwudkiopfx Afmsw - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,749,535 h, functionality: fully functional, machine/vehicle number: 6060449, turning length: 305 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 32 mm, overall weight: 8,000 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 32 mm, total length: 3,671 mm, total height: 2,650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, bar diameter (max.): 32 mm, collet bore: 32 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, power: 36 kW (48.95 HP), travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 305 mm, clamping diameter: 32 mm, controller manufacturer: Traub System TX 8i - s V7, Equipment: documentation/manual, The machine is operational and currently in production. All information can be found in the attachment. The machine is available for immediate delivery. The order confirmation with all information about the machine and the loading magazine is included in the attachment. New price: €444,857.70 (gross) Cgjdpfezc Hmujx Afmew The machine was originally used as a demonstration model from 2016 to 2020. Please note the operating hours. The machine will be sold including the FMB LSK38 loading magazine. FMB LSK38 / 3200 "C"

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Cgodeytn Emopfx Afmsw Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor Cgjdpfox Irzvex Afmow