Used Horizontal Machining Center for sale (69,382)

Condition: used, Year of construction: 1999, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 15,2 t Tool bore: SK50 Tool taper: HSK-A 100 Lrjdpfxewdywqe Af Esu turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Lodpfx Afoxmfa He Ejru Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection Renishaw measuring probe OMP60 SK50 DIN69871 – pull studs DIN69872 6000 rpm, 2 gearbox stages, max. torque 1000 Nm Lrsdpsv Npm Hjfx Af Eou Tool chain magazine with 80 positions 2 pallets 800x800 mm, M16 hole grid Coolant high pressure through spindle 50 bar Knoll paper band filter and chip scraper conveyor Year of manufacture Dec. 1999 (max. single-shift operation)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, two pallets, chip conveyor. Ljdpoxl Tkwefx Af Ejru

Condition: used, Year of construction: 2019, 2 x Heckert H55 machining centers, year 2019, for sale The machines can be inspected under power. Lredpfx Afoxn Rive Eju

Condition: excellent (used), Year of construction: 2022, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate Y-axis: 6 m/min, nominal power (apparent): 40 kVA, torque: 200 Nm, controller manufacturer: Fanuc, controller model: OiMF, total height: 3,070 mm, total length: 4,580 mm, total width: 2,720 mm, table load: 500 kg, rotational speed (min.): 40 rpm, rotational speed (max.): 15,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 400 mm, tool weight: 8,000 g, input voltage: 220 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained Wele HMC500 for sale. The machine was professionally serviced and dismantled by the JTEKT/Wele factory service team in week 48. The machine is packed and ready for collection; commissioning by JTEKT/Wele can be arranged at additional cost. Control on: approx. 25,000 hours Machine on: approx. 25,000 hours Program run time: approx. 8,500 hours Spindle on: approx. 8,500 hours Drive on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Includes: - Measuring probe - 4 SK40 tool holders (1 measuring probe, 3 tool holders with tools) The machine was exclusively used for machining aluminium. Machine package includes: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001° Lsdpfx Asxnvpzof Esru - 2 pallet towers, each with 4 sides and 3 universal clamps per side by Lang Quick Point - Chip conveyor and chip trolley included - Coolant tank (500 litres) and oil skimmer included Feed rates: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency inverter included

Condition: used, Year of construction: 2002, Technical details: Ljdewg H Hwepfx Af Ejru x-travel: 800 mm y-travel: 800 mm z-travel: 710 mm Tool bore: SK 50 turning speed range: stufenlos 45 - 12000 U/min size of pallet: 500 x 630 mm tools in tool magazin: 52 weight of the machine ca.: 15 t total power requirement: 62 kW Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. Ledpfexmfatox Af Eeru - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Lredpoxni Uqefx Af Eju Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 510/510/510mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Pallet size: 2 x (400x400mm) Maximum load on the table (pallet): 2 x 400kgs Maximum workpiece dimension (diameter x height): Ø 550 x H 800mm Spindle speed: 15.000 rpm Built in spindle motor: 18.5/26/37 kW Machine size (Width x Depth x Height): 1.750x5.060x2.720mm Machine weight: 8.700kgs Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Lodpfx Aoxnizdjf Eoru Oil Skimmer

Condition: used, Year of construction: 2006, BAZ Kekeisen UFF 6000, year of manufacture 2006. The machine can be inspected under power! Lrjdpfxjxn Riis Af Esu

Condition: good (used), FANUC 18iMB Control Working travels 1020 x 610 x 600 mm Tool changer with 48 Positions Spindle speeds 15'000 rpm Spindle taper BT40 Cooling through spindle Laser tool control system 3D measuring taper Chip conveyor Misc. accessories Ledpetwp H Hsfx Af Eeru MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2005, Machine is still in production now. Lredpfowza A Iex Af Eou Technical details attached as pdf file. Parts shown by hand not come. 3D touch probe added 02.09.2025.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Lrsdpfx Afoxmd Uce Eeu Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm Ljdpfxexni T Ts Af Eoru z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement Lrjdpfx Afexizdae Esu - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: used, Year of construction: 2016, BAZ DMC 850V, year of manufacture 2016 (3 axes) Lodpfx Ajxn N R Ssf Esru Tool changer with 30 positions Control: Sinumerik 840D Table size: 1150mm x 600mm Travel distances: x:850mm y:520mm z:475mm Operating hours: 16637 h Spindle hours: 10477 h

Condition: used, Year of construction: 2016, x-travel 560 mm y-travel 560 mm z-travel 660 mm control Celos Siemens 840 sl Operator table surface area 400 x 400 mm rapid traverse 60 m/min table rotating 360 x 0,001 B-Achse ° table load 0,4 t numbers of pallets 2 turning speed range 15000 U/min max. torque on the spindle 207 Nm Lredpjw Eygzsfx Af Eeu power capacity - milling spindle 30,7/26/18,5 kW no. of tools in the magazine 60 Stück tool taper SK 40 | weight 9,3 t dimensions 4,2 x 2,7 x 2,8 m Equipment: - full B-axis table - Thru-the-spindel coolant system 70 bar - chipcoveyor - Helical cutting - Synchronized tapping - absolute scale - one extra pallet - band filter system Knoll - oil dust collector - cable less 3D touch probe - tool break detection - elct. hand wheel - spindle cooling - Roto Clean

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 813 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 711 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, Haas EC500 Lrodpfxexmlizj Af Eju 2008 Traverses X Y Z; 813 x 508 x 711mm, Pallet size 500 x 500mm, number of pallets 2 , Maximum workpiece weight 300 Kgs, spindle power 40Hp, spindle speed 12,000 rpm, 40 tools , spindle taper BT40, Through spindle coolant, under power Location in Israel

Condition: good (used), Year of construction: 2006, Ref. -No.: 10527 Manufacturer: MITSUI SEIKI Type: HU 150 A Year of construction: 2006 Lredpfx Afjxl N Tus Eeu Type of control: CNC Control: FANUC 15i Storage location: Halberstadt Country of origin: Japan Machine-No.: SN1XX X-Travel: 2400 mm Y-Travel: 2000 mm Z-Travel: 1500 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 1500 x 1500 mm Table Load: 8.000 kg Tool Taper: MAS BT50 Spindle Speed: 6.000 RPM Max. Torque: 2.212 Nm Further information: Pull stud: Mitsui IKZ: 30 bar Machine can be inspected under power by arrangement. The machine is currently still in production.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: MSX-701IV, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,600 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 9,800 kg, spindle speed (max.): 14,000 rpm, Offered here is a CNC horizontal machining center by the manufacturer Mori Seiki, model NH 4000 DCG. The machine is in very good condition and can be inspected under power in our facility. The machine will be loaded free on truck (FOT). Technical Data: Manufacturer: Mori Seiki Model: NH4000 DCG Year of manufacture: 2009 Control: MSX-701IV Lredoxmhi Rspfx Af Eeu Travel (X-Y-Z): 560x560x630 mm B-axis: 360x1° indexing table Distance spindle center to top of pallet: 80-640 mm Distance spindle nose to center of pallet: 100-730 mm Pallet dimensions: 400x400 mm Number of pallets: 2 Pallet change time: 6 s Maximum workpiece weight: 400 kg Maximum workpiece diameter: 630 mm Spindle speed: 14,000 rpm Tool holder: BT 40 Feed rates X-Y-Z: 50,000 mm/min Rapid traverse X-Y-Z: 50,000 mm/min B-axis max. rotation speed: 44.4 rpm Tool magazine: 60 positions Tool change time: 0.9 s Power consumption: 32.8 kVA Dimensions (LxWxH): 4,004x2,397x2,711 mm Weight: 9,800 kg

Condition: used, Year of construction: 2013, Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool Changer: -> 60 stations Machine/Asset does not include any product-related tool/fixture or gripper (robot). Lrjdpfx Ajxgpirof Eou

Condition: used, Year of construction: 2014, BAZ DMC650 V, year 2014 with long pallet changer Travel paths: x: 650mm, y: 520mm, z: 475mm Ledpfxoxn N A Uj Af Esru 3D control Heidenhain TNC 640

Condition: used, Year of construction: 2014, Design: -> Dual-spindle Spindle: -> Tool holder HSK63 -> Speed 17,500 rpm Linear Axes: -> X-axis 600 mm -> Y-axis 600 mm -> Z-axis 400 mm Tool Changer: -> 84 positions (42 per spindle) Work Stations: -> OP10: 4-axis (rotary axis/swivel beam) -> OP20: 5-axis (rotary axis/swivel beam + 2 rotary tables) Operating Data: -> Spindle hours approx. 22,000 -> Operating hours approx. 48,000 Ledpjxgphbsfx Af Eoru Machine/asset does not include any product-related tool, fixture, or gripper (robot). The machine operates with a FANUC M710iC robot as a loading and unloading unit. The robot is not included in the scope of delivery and can be purchased separately (Lot 2770023).

Condition: used, Year of construction: 2018, Heller HF3500 Base Machine HF 3500 APC Equipment Package POWER NC Swivel Rotary Table for 5-Axis Machining with Tilted Rotary Axes Travel Paths X710/Y750/Z710 Plane Transformation (CYCLE800) Tool Extraction Execution in accordance with EC Machinery Directive with Declaration of Conformity and CE Marking Precision Water-Air Cooling Unit (Compressor cooler for cooling the direct drives of A- and B-axes as well as for spindle and control cabinet cooling) HSK-A 63 Tool Holder according to DIN 69 893 Standard control panel at the tool setup station (chain) Workpiece setup station, pallet manually rotatable and lockable in 90° increments (cannot rotate freely with media interface) Workpiece clamping mechanical Two pallets as zero-point clamping systems with DIN hole pattern in base machine Scraper belt conveyor for wet machining Main control console in desk design with 24" screen with multitouch function and “HELLER Operation Interface” Equipment/Accessories PC 63 i Power Cutting Unit (12,000 rpm, 45 kW, 228 Nm) Receiver for wireless probe, make RENISHAW (incl. HELLER measuring cycles only with Siemens) Wireless probe with tool holder and probe insert, make RENISHAW RMP 60 Tool magazine with 80 places, chain version Fast drill breakage detection Comfort control terminal at tool setup station (chain) Enforced-Drive in A – Reinforced torque drive for the A-axis (for simultaneous 5-axis machining) Coolant purification system, paper band filter TMF600, ICS 70 bar with frequency-controlled high-pressure pump, work area rinsing Coolant chiller (water-air / type: compressor) Extraction system for emulsion Door window air blow device for work area door Ledpfx Afoxnqgue Esru Siemens SINUMERIK ONE Process-integrated tool monitoring (IPM) LED status light red - yellow - green Technology package milling (ONE Dynamics 5 axes) Collision avoidance strategy AutoCal (Automatic Calibration) Handheld control device SINUMERIK HT 2, make Siemens Interface for handheld control device Extension package Standard-MF-II PC keyboard for main control console Extension to 4 pallets Additional equipment not included in the purchase price (available separately) Hyper Mill post-processor 3D machine model STP