Used Holzher Sprint 1317 for sale (149)

Condition: excellent (used), Catalog number 7814 TECHNICAL DATA Equipment: - disc Prjdpfx Aoxxla Rsdned - pre-milling - tape feeder - glue container (cartridges) - guillotine – pre-trimming of the edging - 3 pressure rollers - 2 finishing trimming units with saw blades - 2 milling units for edge shaping (radius cutters) - corner processing unit - scraping units – for removing excess glue - polishing units - workpiece thickness: 6-45mm - minimum workpiece length: 180mm - minimum workpiece width: 60mm - edge band thickness from roll: 0.4-3mm - air requirement: 6-8 bar - extraction connection diameter: 1x60mm, 4x80mm, 1x120mm - dimensions (LxWxH): 5900x950x1850mm - weight: 1720kg ADVANTAGES – German manufacture – spraying system – pre-milling and corner processing – unpainted – very good condition, hour counter: 3613h – used edgebander Net price: 56,900 PLN Net price: 13,550 EUR depending on rate 4.2 EUR (Prices may vary with higher fluctuations)

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pedpfxowka Nyj Adnsrd Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 Pedpfev Sv Enjx Adnord with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Psdpfx Adjvzyblsnerd Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with new glue application system - Manually adjustable infeed guide - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensitive nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edging thickness depending on equipment: 0.4–5 mm - Maximum edging height: 55 mm - Edging length (strips): min. 350 mm - Edging overhang/height per side: max. 3 mm - Minimum workpiece width: 60 mm - Minimum workpiece length: 180 mm - Feed speed: 12.5 m/min - Extraction: - Joint milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static vacuum: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Prodpfx Adjwka H Sjnjd Location: Flörsheim

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 45 mm, total width: 1,402 mm, edge thickness (max.): 6 mm, total height: 1,565 mm, overall weight: 850 kg, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 400 V, extraction nozzle diameter: 70 mm, input frequency: 50 Hz, extraction connection diameter: 70 mm, pneumatic connection: 6 bar, product height (max.): 45 mm, pressure: 6 bar, operating pressure: 6 bar, 2005 Holz-Her Sprint 1310 Edgebanding Machine Machine Type: Edgebanding Machine Year: 2005 Condition: Good Compact, Reliable, and Precise – Holz-Her Quality Edge Finishing For sale: 2005 Holz-Her Sprint 1310 Edgebanding Machine in very good working order. The Sprint 1310 delivers exceptional edge processing accuracy and finish quality in a compact footprint, making it ideal for cabinetmakers, joiners, and furniture manufacturers who need reliable, professional edge processing. Built in Germany by Holz-Her, the Sprint 1310 combines industrial strength and precision control with intuitive operation via its advanced HOLZ-HER PLC touchscreen interface. ⚙️ Technical Specifications – Holz-Her Sprint 1310 Model: Holz-Her Sprint 1310 Year: 2005 Edge Thickness Range: 0.4 – 6 mm Workpiece Height Range: 10 – 45 mm Min. Workpiece Length: 180 mm Min. Workpiece Width: 60 mm Feed Speed: 8 m/min Max. Edge Thickness (per side): 3 mm Glue System: 1905 Multi-System (for EVA or PUR adhesive cartridges and granules) Pressure Section: Two rollers with pneumatic control Prodpfx Asxyuqbedned End Trimming Unit: Dual saws with 0.22 kW motors (swinging for corner trimming) Multifunctional Trimming Unit: Two HF motors (0.6 kW each) for flush, radius, or chamfer trimming Scraper Units: Radius scraper and surface scraper (optional motorised adjustment) Buffing Unit: Twin polishing wheels for high-gloss finishing Control: PLC control with clear text display and graphic support Dust Extraction Ports: Ø 70 mm (trimming, scraping, and buffing units) Pneumatic Pressure: 6 bar Machine Dimensions (L × W × H): approx. 2174 × 1402 × 1565 mm Weight: approx. 850 kg Condition: good 🌟 Key Features and AdvantagesHigh-Performance Edgebanding for All Materials Perfect for PVC, ABS, veneer, melamine, and solid wood edging. Quick-Change 1905 Glue Application System Accepts EVA or PUR glue in both cartridge and granulate form – quick heating and precise application. Powerful Pressure Section Dual pressure rollers ensure a tight, seamless bond between edge and panel. Compact and Efficient Design Saves valuable workshop space while maintaining full professional functionality. Integrated PLC Touchscreen Control Large LCD display with program memory, clear text messages, and graphic function guidance. Clean Finishing Units Includes radius scraping, surface scraping, and buffing stations for a perfect finish. Durable Construction Built on a robust, precision-ground steel frame for long-term stability. 🪚 Typical Applications Cabinet and furniture manufacturing Joinery and interior fit-out workshops Kitchen, office, and shopfitting panel finishing ABS, PVC, veneer, and solid edge processing Why Choose This Holz-Her Sprint 1310 Renowned German build quality from Holz-Her. Versatile – handles multiple edge types and thicknesses. Compact, reliable, and simple to operate. Excellent finish quality with low maintenance needs. Good condition. Available for viewing by prior appointment Holz-Her Sprint 1310 for sale 2005 Holz-Her Sprint 1310 edgebander Used Holz-Her edgebanding machine Ireland Holz-Her Sprint 1310 specifications Holz-Her 1310 edge banding machine Sprint 1310 EVA PUR glue system Used edgebander for furniture production Holz-Her Sprint 1310 PLC control Compact automatic edgebander Holz-Her Used woodworking machinery Ireland Holz-Her Sprint 1310 edge finishing machine Used Machine Tools Ireland edgebanders

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information Pjdpexlqpdsfx Adnsrd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic Podpfx Adoxuhpajnjrd trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Prodpfexducrox Adnod Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Prsdpfsw Ebrxjx Adned Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: The machine has been completely overhauled: - New Glue Jet 301 gluing system (top part 1 mm) - All units inspected - All cutters sharpened - All knives replaced Electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW Prodpfxswka Iis Adnjd Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving mode Infeed fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Fully automatic edge feed 1901 Automatic glue application station Glu Jet GJ301: - 2.3 kW; 50 Hz - Hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pieces required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Strong flat milling Pjdpfx Ajd Nukqednerd Tilting radius milling Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Prjdpfx Ash Ux Suodnod Length approx. 5300 mm

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION Psdpfx Adew Igg Sjnord ex works

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): Predpewn Nuaofx Adned ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Prsdpfx Aovymdqodned Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm Pjdpfxjwqifks Adnerd - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2004, Cutting length 4300 mm, cutting height 2200 mm, motor 4.0 kW, cutting depth 60 mm, saw blade diameter 250 mm. Location: Nattheim. Pedpfjxr A Nvex Adnjrd

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Predpoxlz Nzofx Adnjd Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Prsdpfx Aexz Icgjdned Can be tested ,

Condition: used, Year of construction: 1992, functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Holz-Her Panel Saw 1211 Year of manufacture: 1992 Fully operational - Automatic retractable support grid - 6 fixed cutting positions - Lowerable support rollers / wood Prsdpfx Adoxz Dxwsnjd - 4 kW motor Installation dimensions (LxHxW): 6.60m x 2.77m x 1.24m Item location: Leipzig The machine can be inspected at any time. However, it must be collected in December 2025.

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: Pedjwkbbdspfx Adnjrd - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: used, Year of construction: 1999, Cutting width: 5300 mm Cutting height: 1910 mm Psdpfjxzu Euox Adnjrd Storage location: Nattheim

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Podjxy Nxyepfx Adnsrd Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Glue height adjustment / touch nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Psdpfxjxymd Te Adnord Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim