Used Holzher Sprint 1310 for sale (147)

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Special feature: was a demonstration unit from Holz-Her and only went into production operation with the machine in 2019 Equipment and technical data: - 30% to 50% space savings Dljdpfx Aswkbagsb Toa - Minimum gap between stacks (from 70 mm) = optimal space utilization - Panel damage excluded, panel separation control with weight measurement - Fully automatic operation (inbound/outbound storage) as well as automatic loading of the machine - Adaptable for all panel formats (1.2 to 5.6 m) depending on options - 90° rotation of panels - Low overall height of the manipulator - External dimensions: - Length: 8.5 m - Width: 7.5 m - Minimum panel size: 1.2 x 0.6 m - Maximum panel size: 3.2 x 2.1 m - Maximum lifting weight: 150 kg - Stack height 1.8 m up to max. 2.0 m - Maximum lifting height: 2.1 m - Travel speed: - Horizontal approx. 120 m/min - Vertical approx. 45 m/min - Manipulator suitable for slightly air-permeable, smooth materials such as coated chipboard, blockboard, raw MDF, raw HDF, raw chipboard (good quality) - Upgrade: Vacuum capacity for suction units on the manipulator 100 m³/h for a material mix in the warehouse such as MDF and raw chipboard - Connected load 6 kW - Portal bridge with vibration dampening, manipulator head with lifting device as well as gripper arm made of steel, space-saving due to low design height Articulated arm design with direct drive via steel band thus wear-free and vibration-resistant - Electronic panel position measurement - Panel rotation correction: The panels are measured with sensors and stacked accurately - Separation system for thin panels via integrated weight measurement - Inbound and outbound storage position - Direct loading onto the machine - Warehouse management software Previous list price: €110,000.00 Availability: short-term Stock location: Flörsheim

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing Dedpfsxuhpaox Ab Tsla maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: good (used), Year of construction: 1999, Cutting area approx. 4300 x 2100 mm manual feed automatic retractable grid Cutting depth 40 mm Dljdpfjxp Uyujx Ab Tea Motor 3 kW Saw blade diameter 220 mm TRK extraction Further technical data on request All information provided without guarantee

Condition: good (used), Year of construction: 2011, functionality: fully functional, Cutting length 4300 mm Dlsdpoxt H Tnjfx Ab Tea Cutting height horizontal 2110 mm Cutting height vertical 2200 mm Scoring unit Free-standing supports

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Dedstt S D Ropfx Ab Tjla Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: excellent (used), 5-Axis Machining Center HOLZ-HER ProMaster 7125 -used- Console machine, pneumatic workpiece stops with double-acting cylinders, pneumatic loading aids, hardened, dust-protected prism guides, helical rack and pinion drive (X-axis), ball screw drives on Y and Z axes, network card for remote maintenance, electrical cabinet cooling with heat exchanger, manual control device, C-axis, A-axis, saw unit for grooving in the X direction, revolving disc tool changer, including safety fence, including tread mats, pendulum operation possible, laser for suction cup positioning, automatic central lubrication, uninterruptible power supply ----- Technical Data ----- Processing length (routing R) X: 3,385L / 3,605L mm, Processing length (routing R) Y: 1,335 mm, min. workpiece thickness: 215 mm, control software: CAMPUS HOPS 7, main spindle motor power: 12 kW (S6), main spindle speed: 1,000 - 24,000 rpm, main spindle interface: HSK-F63, spindle cooling: liquid cooling, drilling unit motor power: 3 kW, drill spindle interface: M10, locating fit 11mm, number of vertical drill spindles: 10 pcs, number of horizontal double drill spindles in X direction: 2 pcs, number of horizontal double drill spindles in Y direction: 1 pc, saw blade diameter of saw unit: 125 x 20 mm, number of consoles: 6 pcs, number of tool changer positions: 18 pcs, vacuum pump capacity: 140 m³/h, extraction port diameter: 250 mm, required volume flow: 6,100 m³/h, required static pressure: 1,300 Pa, Dledpexlqkhefx Ab Tja required air velocity: 35 m/s, compressed air connection: 6-8 bar, compressed air consumption: 300 Nl/min, weight: 4,600 kg, year of manufacture: 2019 Quality Information: - complete basic cleaning - electrics checked - pneumatics checked - set as per manufacturer's specifications - immediately ready for operation

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis Dedpfswka Ipjx Ab Tjla with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Djdoxrr Uzopfx Ab Tsla Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: not inspected (used), Year of construction: 1998, cutting width (max.): 5,300 mm, Equipment: rotational speed infinitely variable, scorer, Holz-Her 1230 Super Cut – Vertical Panel Saw – Scoring Unit – Digital Display Technical data: Cutting length: 5,300 mm Cutting height: 2,200 mm Dljdpsxqd Udofx Ab Tja Cutting depth: 80 mm Motor: 5.5 kW / 4,500 rpm Feed rate: stepless up to 24 m/min Electric height adjustment, PLC control Extraction: 2 × Ø120 mm Air connection: 6 bar Equipment: Automatic horizontal & vertical positioning Digital readout for horizontal cuts Pneumatically swiveling saw unit Supercut scoring system Price: negotiable 6,500 Invoice with VAT, shipping available by arrangement

Condition: defective spare-parts repository (used), HOLZ-HER 1230 Automatic. The machine's controller lacks the panel required for automatic formatting. With the help of an electrician, it can be converted to normal automatic operation. Until then, operation is not possible in either manual or automatic mode. Industrial machine in good condition, but thus it is advertised in incomplete condition. Dljdouuf Akspfx Ab Toa

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately. Djdpfott Sy Hox Ab Tola

Condition: new, Year of construction: 2024, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Stock machine – Subject to prior sale Year of manufacture: 2024 - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) Dlsdpfx Aboxpgv Ue Tea - LED machine lighting - Jointing milling unit - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper - Surface scraper - Buffing unit

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach Dodpfxewka H Ej Ab Tsla

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws Dlodpjxqa Iysfx Ab Tja milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness scraping unit for chamfers and radii with 2 scraping blade holders surface scraping unit - finish spraying device - PU machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Dledpfx Asxlthpeb Tea Uninterruptible power supply (UPS) EASY-PLAN – Dongle version OPTI-CUT – Machine software Opti Pro – Office optimization software

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Cutting range 5300x2200mm Dlsdpjpl Svcefx Ab Toa Motor 3,0kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Dodpfx Abjw Nac As Tjla Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Dsdoi U Dxuspfx Ab Tela Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Dodpfx Abjw I Uxpo Tsla Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Dsdpfx Aboxb Hf He Tjla Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid with complete length stop with strip stop Availability: short-term Location: 65439 Flörsheim

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 Dljdpfxjxllvrs Ab Tea - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Features and technical data: Cutting range: Cutting length: 4300 mm Cutting height: 2100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support for optimal positioning, including for narrow workpieces Chips are removed via slanted slots Roller transport system: Manual for easy and material-friendly transport Indexing: Djdpfxsxllv Ej Ab Tjla Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Carbide-tipped (HM), 250 mm, hollow ground alternate top bevel, 48 teeth Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Crosscut fence: Incl. workpiece support for narrow parts (4 positions) Extraction unit in accordance with BG guidelines TRK (less than 2 mg fine dust / m³ air) Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Dsdpew I U E Aefx Ab Tjla Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2021, Factory-refurbished used machine with 6 months factory warranty Year of manufacture: 2021 Condition: As new Features and technical data: Cutting height: 2200 mm x Cutting length: 4300 mm (Edging height / max. horizontal cutting height: 2110 mm) PowerPackage 400 V The package includes the following options: 1. TRK extraction unit 2. SuperCut scoring unit 3. Vertical digital display 4. Infinitely variable speed control (9 kW power) Pneumatic aluminium shifting support Medium-sized workpiece support on all panels Dledpfxjxgkf Is Ab Tja Additional digital longitudinal stop (manual) Strip stop for recurring horizontal cuts Digital measurement display for horizontal cutting at the control panel 3 adjustable stop points in the saw beam Narrow part attachment (2 pieces) Location: Flörsheim Availability: Short notice

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Dledpfx Asw Rhiysb Tea Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim