Used Flail Mower Quad for sale (250)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Bodpfx Aqoy Hi D Sorsdc Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ New & In Stock ✅ Ideal for Tall Grass & Large Meadows ✅ Shipping Available SCHORR FLAIL MOWER RR600HM HIGH GRASS MOWER 8HP 252CC MULCHER - Effortlessly mows tall grass and dense scrub - Powerful 252 cc 4-stroke engine (8 HP) – strong & reliable, even in thick vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made of hardened steel – efficient mulching of material up to 2.5 cm diameter - Robust 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Cutting height infinitely adjustable (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – even on slopes or uneven ground FEATURES / SPECIFICATIONS Whether it’s tall grass, dense brush, or woody growth: this flail mower gets the job done reliably and consistently. The SCHORR RR600HM is built for tough tasks – equipped with a powerful Loncin 4-stroke petrol engine (252 cc) delivering a solid 8 HP. At its core is a 4-speed gearbox (3 forward / 1 reverse), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel mounted on a sturdy rotor, the RR600HM provides uniform and fine mulching. Whether on meadows, orchards, field margins, or fallow land – even branches up to 2.5 cm in diameter are processed with ease. Its 600 mm cutting width enables productive work while maintaining high maneuverability. The cutting height can be adjusted tool-free using the handwheel (20–80 mm), allowing flexible response to terrain and vegetation. The RR600HM is designed for intensive applications – be it overgrown gardens, large green areas, or agricultural environments. The robust construction, deep-tread drive wheels, and self-propulsion ensure confident traction – including on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably managed with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscape contractors. For those seeking more than just a lawn mower, this machine provides real power at a fair price. Bdsdpfxowtqdmo Aqrec Technical Data Manufacturer (abbreviation): SCHORR Manufacturer model: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flail Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Overall length: 1790mm Overall width: 730mm Overall height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke (OHV) engine Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (RON min. 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity: approx. 5L Engine oil capacity: approx. 1.1L Our knowledgeable team is happy to answer any questions you may have about the SCHORR RR600HM Flail Mower for High Grass. You can reach us by phone or email. We look forward to hearing from you and assisting with your inquiry. Find the initial investment for a flail mower too high? No problem, we also have some used machines in stock. Feel free to contact us.

Condition: used, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ Like new & in stock ✅ Ideal for tall grass & large meadows ✅ Shipping available SCHORR FLAIL MOWER RR600HM HEAVY-DUTY BRUSHCUTTER 8HP 252CC MULCHER - Effortlessly cuts tall grass and dense undergrowth - Powerful 252 cm³ 4-stroke engine (8 HP) – robust & reliable even in tough vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made from hardened steel – efficient shredding of material up to 2.5 cm in diameter - Rugged 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Adjustable cutting height (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – also suitable for slopes and uneven ground FEATURES / SPECIFICATIONS Whether tall grass, dense brush, or woody growth: this flail mower completes the job reliably and with endurance. The SCHORR RR600HM is built for challenges – equipped with a robust Loncin 4-stroke petrol engine (252 cm³), delivering a full 8 HP. Its core is a 4-speed gearbox (3 forward / 1 reverse gear), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel on a heavy-duty rotor, the RR600HM provides consistent and fine mulching. On meadows, orchards, field edges or fallow land – even tree cuttings of up to 2.5 cm in diameter are processed effortlessly. The 600 mm cutting width allows for efficient work and excellent maneuverability. Cutting height can be adjusted tool-free using a hand wheel (20–80 mm), so you can quickly adapt to any terrain and vegetation. The RR600HM is designed for intensive use – whether it’s overgrown gardens, large grass areas or agricultural settings. The heavy-duty build, coarse-profile traction wheels, and self-propelled drive system guarantee controlled handling – even on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably maintained with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscapers. For anyone who wants more than just lawn mowing, this is a true powerhouse at a fair price. Technical Data Manufacturer (short): SCHORR Model code: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flails Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Total length: 1790mm Total width: 730mm Total height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke engine (OHV) Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (min. RON 95) Starter: Recoil starter (pull cord) Bdedswufhcopfx Aqrjc Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity approx.: 5L Engine oil capacity approx.: 1.1L Our knowledgeable team is happy to assist you with any questions regarding the SCHORR RR600HM Flail Mower. You can reach us by phone or email. We look forward to hearing from you and providing expert advice. Are the acquisition costs for a flail mower too high for you? No problem – we often have used machines in stock. Feel free to contact us.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station Bdedpfeza Ethex Aqroc PRS unpacking station Laser class 1 CE marking present Service / Usage history From the beginning, the system was used exclusively for processing aluminum and operated under a nitrogen atmosphere. Operation was reliable until decommissioning. As part of the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel chiller WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition according to images. Scope of delivery as shown in the pictures. A complete technical functional test under production conditions has not been carried out by us. Inspection and testing on site are possible and expressly desired after consultation. Loading can be organized after consultation. All information is provided to the best of our knowledge based on available documents, manufacturer's data, delivery note and nameplates. Deviations in technical data are possible. Errors, changes and prior sale are reserved.

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Travel and working speed: max. 16 km/h 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Bjdpfx Asy Ai Nteqrjdc Weight: 716 kg Good condition

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F76090, I am offering a Morso pneumatic cutter for wooden strips, picture frames, door frames, and similar applications. The cutter can bevel edges to a right angle, as well as create octagonal and hexagonal shapes. It features a new guide rail, a new sliding mechanism for the entire unit, two sets of newly sharpened blades, and supports for holding strips in place. On the right side, there is a cast iron extension table with a guide rail. Bodpfjzack Dsx Aqrsdc

Condition: used, Trenching machine • Independent hydraulic system Bsdpfxsy Ui H No Aqrodc • Working range: 4500 mm • Without bucket (optional) • Ready for immediate use • The tractor is not for sale!! Condition: Used

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 885 h, motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, first registration: 05/2026, Equipment: air conditioning, cabin, front power take-off, hydraulics, John Deere 1585 lawnmower with a 900-liter grass collection bin, road approval, all-wheel drive, 60-inch mowing deck, additional control unit at the front, and air conditioning. Bdedpfx Asy Uh E Doqrsc

Condition: good (used), functionality: fully functional, Scalding and dehairing machine (machine for scalding and dehairing pigs) Internal dimensions of the working chamber: 1800 mm x 800 mm Overall external dimensions: 2150 mm x 1000 mm x 1400 mm Construction: Stainless steel (acid-resistant) Industrial, compact scalding and dehairing machine (scalding tank with dehairing system) designed for professional processing of pork carcasses in small and medium-sized slaughterhouses, meat processing plants, and butcheries. The device combines two key operations of the slaughtering process: scalding (to soften the skin and open hair follicles) and mechanical dehairing. Thanks to the optimal internal dimensions of the tank (1800 x 800 mm), the machine allows for easy and convenient processing of even very heavy carcasses. The construction ensures excellent thermal stability of the scalding water and uniform pressure of the dehairing rollers, which guarantees thorough cleaning of the carcasses without damaging the epidermis and the fat layer. Key features and advantages: - 2-in-1 device: Combining the functions of scalding and mechanical hair removal in a single unit saves valuable space in the slaughterhouse and reduces the investment costs for separate machines. Bjdpfxey Uckbj Aqredc - High cleaning efficiency: Specially shaped rotating rollers equipped with flexible, durable gripping fingers effectively remove hair and contaminants from the entire surface of the carcass, including hard-to-reach areas.

Condition: used, Year of construction: 2025, operating hours: 8 h, machine/vehicle number: C300002625, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Bdodpfxox Uv Ugj Aqrjc Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: C300002967, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Bsdpfx Aex U Rg Rsqrodc Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 68 h, machine/vehicle number: C300001316, mast type: telescopic, fuel type: diesel, Empty weight: 12.375 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Bodsxc Dl Tjpfx Aqrsdc Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, fuel type: diesel, mast type: telescopic, Year of construction: 2025, machine/vehicle number: C300002960, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Bedpfx Aqex Azi Njrjdc Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, color: red, Year of construction: 2000, Bos edge trimmer    • PTO driven Bsdpfjy R Upusx Aqredc    • Three-point linkage    • PTO shaft included Condition: Used Year of manufacture: 2000

Year of construction: 2022, condition: used, functionality: fully functional, Selling a liquid chromatograph, SCIEX Triple Quad 6500+ with Shimadzu LC-40Dx3. Complete, well-maintained set; the instrument has not been fully utilized. Can be inspected in the laboratory. You are welcome to visit. Dismantling and transport are the responsibility of the buyer. Bdodpfxjyw Nf Dj Aqroc

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Bdedpfx Ajxlf N Ssqrjc Precisely set your cutting height for maximum performance.

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer Bdsdpfoyip Arex Aqrec • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter Bdedpfx Aqey E Etyersc OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: new, working width: 2,300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 - Max. branch diameter: 4 cm - Working speed up to: 4 km/h - Required oil connections: 1 x double acting + 1 x free return (leakage oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Bjdpfjy E Ettsx Aqrsdc Delivery without hydraulic hoses and oil flow divider! Key advantages: - High capacity – Efficient maintenance of large hedgerows - Unique cutting system – Cuts and mulches branches in a single process - Very long lifespan – Built with high-strength steel components The RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine stands out with its large working width and high operating speed, ensuring impressive capacity. Branches are cut and shredded in one pass. The processed material is gently deposited beneath the unit, initiating natural decomposition. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a wide range of various Greentec products, all available for immediate delivery! Mr. Herden (phone ...) is at your service. On request, we are happy to provide you with a financing offer. We are official distribution and service partners for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale. = Further Information = Please contact Marius Herden for more details.

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFCE358305679711, mileage: 200 km, first registration: 01/2025, fuel type: diesel, tire condition: 100 %, next inspection (TÜV): 01/2029, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, airbag, IVECO DAILY 35C12 V 4100 H3 Quad-Tor RG - EURO 6E Bsdpjyctnlofx Aqrodc National vehicle – VAT exposed Vehicle length: 7.283 m Payload: 877 kg Leasing and tailor-made financing available Possible also with zero down payment, with small monthly installments and a large final balloon payment Trade-in and scrappage options available Price: €29,500.00 + VAT 22% = €35,990.00 VAT Included Mileage CERTIFIED both on the contract and on the invoice. Despite our efforts to list all characteristics of the offered vehicle, some discrepancies in accessories and/or photos may occur. We invite you to verify the details with one of our consultants, who will be at your disposal for any additional information. JollyAuto - Multibrand dealership since 1984 - Passenger cars and commercial vehicles of all brands - Authorised DFSK – EMC – FOTON dealer - New, nearly new, company fleet, guaranteed used vehicles - APPRAISAL and TRADE-IN of your used vehicle

Condition: used, color: orange, Year of construction: 2016, Working width: 190 cm Bjdpoy Efttefx Aqredc

Year of construction: 2008, condition: good (used), fuel type: diesel, JOHN DEERE 1515 Lawn Mower Yanmar Diesel 4x4 Park Mower / Air Conditioning 2008 Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Bedpfx Aqsy A I T Dsrjdc Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Suitable for mulching grass and brush up to 3 cm Ø - For excavators from 2 to 5 tons - Suitable for mounting on various adapter plates - Floating mounting (parallelogram guide) - Indirect V-belt drive with 3 belts - Drive designed for hydraulic motor depending on the carrier’s oil flow rate - Housing made of wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearing, height-adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 units, part no. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of incorrect use - Required hydraulic pressure (min-max): 150 - 250 bar - Required hydraulic oil flow (min-max): 35 - 60 l/min Optional: MS03 adapter plate including bolts and installation = €530.00 net Three hydraulic lines required: feed, return, and drain. The device is supplied without hoses or fittings. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a large range of Seppi M. products in stock and available for immediate delivery. Bdjdpeyix Hmefx Aqrec Mr. Herden (phone) will be happy to assist you. On request, we will be happy to offer you a financing option. We are an official sales and service partner for the following brands: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Contact Marius Herden for more information.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 Bdedpfx Asyix Haoqrsc OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Condition: used, Year of construction: 2024, working width: 85,000 mm, For inquiries regarding the attachment, please contact Mr. Herden (by phone) for assistance. Seppi M. H3 085 / Flail Mower / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Excellent condition! Price: €7,040.00 net / €8,377.60 gross This mulcher has only been used briefly, for a single job! - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tons - For mounting on various adapter plates - Float mounting (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit’s oil flow - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Colour: red RAL3020, anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pcs, part no. 150.02.041 OPT 428 Hydraulic gear motor 11cc - With flow control valve and DRAIN SAFE TM motor safety valve protects the motor in case of misuse - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic oil flow in l/min (min-max): 20 – 50 OPT 529 DRAINLESS system with pressure accumulator (NO case drain line required!!) - Including hoses and check valve 2 hydraulic lines are required: supply and return. No case drain! The unit is delivered without hoses or connectors. We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We offer a large inventory of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing available upon request. We are an official sales and service partner for: - Seppi M. - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Bsdpfxoyklntj Aqredc We supply the complete Seppi M. range! Subject to errors and prior sale! Internal ref. no.: 520013 = Further information = Please contact Marius Herden for further details.