Used Holzher 1401 for sale (160)

Year of construction: 2016, condition: good (used), • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Hodpswkf Twofx Ah Nofb Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Hodpfx Ahewftb Sj Nofb

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. Hjdpfx Aow I Er Tjh Nofb IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee.

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Hodpfxenxkm Eo Ah Njfb Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: ready for operation (used), Year of construction: 2011, operating hours: 25,996 h, functionality: fully functional, machine/vehicle number: 55/1-105 15501954 BAZ11V3, travel distance X-axis: 6,566 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 445 mm, spindle speed (max.): 6,500 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! Machine already dismantled TECHNICAL DETAILS Workpiece dimensions for cutting (without cutter radius): 6,225 x 1,595 mm Travel range X: 6,566 mm Travel range Y: 1,800 mm Travel range Z: 445 mm Vertical clearance standard consoles – 1st stroke: 498 mm Vertical clearance standard consoles – 2nd stroke: 598 mm Vertical clearance Vario table – 1st stroke: 445 mm Vertical clearance Vario table – 2nd stroke: 545 mm Speed Programmable vector speed: 142.0 m/min Speed X: 100 m/min Speed Y: 100 m/min Speed Z: 25 m/min Drilling unit Type: Drilling unit 7976, 24 spindles Drive power: 3.0 kW Vertical spindles Number: 18, selectable individually Arrangement: L-shape (10 in X axis, 8 in Y axis) Spindle pitch: 32 mm Max. drilling diameter: 35 mm Total drill length: 70 mm (from screw end, depending on panel thickness) Spindle stroke: 70 mm Rotation direction: alternating right-/left-hand Speed range (stepless): 1,000 – 6,500 rpm Connection: M10 thread – press-fit 11 mm Horizontal spindles Number: 6 In X axis: 2 double drilling spindles Spindle pitch (X axis): 32 mm In Y axis: 1 double drilling spindle Connection: M10 thread – press-fit 11 mm Total drill length: 70 mm (from screw end) Consoles & suction cups (VarioTable) Number of consoles (automatic positioning): 6 Work consoles (automatic, X direction): 5, in zones A + D Suction cup holders per console (automatic, Y direction): 3 Hjdpswvi Icjfx Ah Njfb Vacuum suction cup per holder: 1, 80 x 80 mm with plunger valve Suction cover per holder: 1 Loading aids: 4 Rear positioning pin per console: 1 Note: Only 5 out of 10 consoles function correctly Saw unit / change-over unit Central unit: Central gearbox 7955, for saws (mainly solid wood) Tool holder: HSK-F 63 Max. output speed: 6,750 rpm Number of spindles: 1 Max. saw blade diameter: 220 mm Saw blade bore: 30 mm Driving pins: 2 x Ø 6 mm Clamp cover: self-locking Lubrication: oil sump lubrication MACHINE DETAILS Operating hours: 25,996 h Number of switching cycles: 965 x EQUIPMENT - Drilling unit with 24 spindles (vertical and horizontal) - VarioTable with automatically positionable consoles and suction cups - 4 loading aids - Center unit for sawing with HSK-F 63 holder - Saw blade holder up to Ø 220 mm with oil sump lubrication - New pump installed - Only 5 out of 10 consoles fully operational – long workpieces can still be held without problems - No tools included in delivery

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 280/1-501 15506069, No reserve price - guaranteed sale at the highest bid! Hfjdpfjwkp S Djx Ah Neb Bidding obligates the buyer to pick up the item by May 26, 2025. Standard equipment according to manufacturer - no guarantee TECHNICAL DETAILS Min. workpiece length: 160 mm Min. workpiece width: 65 mm Workpiece thickness: 8 – 45 mm Edge width: 0.4 – 3 mm Feed speed: 10 m/min Feed system: Single conveyor for wound edge strips or strips Pre-milling unit Milling feed: 45 mm Glue application Glue system: Glu Jet S Glue type: EVA and PUR adhesive (single-cartridge system with glue stick) Pressure system Number of pressure rollers: 3 Trimming Trimming motors: Single motor system 45 mm Cutting cut Cutting unit: Multifunctional unit Corner rounding Corner rounding: 60 mm Scraper Scraper: Mechanical including chip extraction Surface scraper Surface scraper: Mechanical, with chip collector MACHINE DETAILS Overall length: 4,930 mm Width × Height: 1,600 × 1,774 mm Weight: 1,400 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 8,969 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, rapid traverse X-axis: 68 m/min, rapid traverse Y-axis: 68 m/min, rapid traverse Z-axis: 68 m/min, spindle speed (max.): 24,000 rpm, number of spindles: 15, TECHNICAL DETAILS Machining dimensions Max. Workpiece size: 3,200 mm x 920 mm x 70 mm (without additional support) Min. workpiece size: 200 mm x 70 mm x 8 mm Milling and drilling capacities Milling (minus milling cutter radius): 1,500 mm Complete machining depth: 1,300 mm Number of spindles (9 vertical / 6 horizontal): 15 spindles, incl. sawing unit for grooving in X-direction Hfedpfx Asu R N Rljh Nob Milling spindle Power: 7.5 kW Tool holder: HSK Speed range: 1,000 - 24,000 rpm Linear changer: 6-fold X-Y changer: Yes Tool dimensions Tool diameter: Ø 110 mm Tool length: 80 mm Feed and speed Infeed guide: Height-adjustable for 4-sided routing and profiling Feed speed: 68 m/min Safety standards CE conformity: Yes Material handling Solid roller conveyors: Yes Stops: 2 stops Workpiece clamping: Fully automatic positioning vacuum suction cups, ECOMODE MACHINE DETAILS Software: CAMPUS / NC-Hops, incl. aCADemy CAD/ CAM module machine license Dimensions L x W x H: 3,675 x 2,470 x 1,660 mm Weight: 2,200 kg Suction connections: 2 x Ø 120 mm + 1 x Ø 140 mm

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Hedpfx Ahougmw Ej Nefb

Condition: used, Year of construction: 1984, used Make Holz-Her Hedpfxovwgi Ie Ah Nsfb Type 1215 Year of manufacture 1984 Motor 4.0 kW Cutting length approx. 5300 mm Cutting height approx. 2200 mm Center support Saw blade diameter approx. 300 mm, cutting depth 80 mm Free-standing Slatted frame moves away Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Hedpfx Aheq Au Hue Nofb Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Hodevwfnpjpfx Ah Njfb

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Hfedpfxoh Uyg Ej Ah Nsb Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Hfedpfxjvwfmxe Ah Nsb

Condition: as good as new (ex-display), Year of construction: 2023, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,110 mm, cutting depth: 80 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam Hfsdpfxotwpgme Ah Njb - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Edge magazine gluing station 1906 Hjdpfx Asiamufeh Nofb printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Hfjdeh Ux Suopfx Ah Nsb Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW suction connection Ø 1x100 mm Compressed air connection 6 bar weight approx. 980 kg width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Hfodpfxjiw D Uds Ah Njb workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm workpiece width min. 60 mm feed rate 13 m/min edge thickness max. 5 mm, roll material 3 mm Edge magazine 1301 with DAZ 11 gluing station 1906 printing unit 1914 trimming unit 1976 Milling unit flush 1942 Milling unit radius R2 1943 scraper 1927 Buffing unit 1944

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm Hodpjh U Sqrjfx Ah Nofb cutting height 1925 mm rack height 2210 mm machine height 2500 mm room height 2540 mm trimming height 1870 mm Passage height 1940 mm

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Hsdpfx Aoiwlz Aeh Nefb Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Condition : very good Location : Warehouse Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: excellent (used), Edge banding machine with HolzHer 3 roller feed Hfjdpovkgdrofx Ah Njb

Condition: ready for operation (used), Year of construction: 2014, This HOLZHER ARCUS 1334 FV2 was manufactured in 2014. A robust edgebander featuring a gluing part, snipping unit, and flush trimming unit. It handles a maximum edge band thickness of 8 mm and includes belt top pressure. Pneumatic control enhances its functionality. Consider the opportunity to buy this HOLZHER ARCUS 1334 FV2 edgebander. Contact us for more information. Additional equipment • Gluing Part Hfodpfx Ahjx U Utbe Nsb • Snipping Unit • Flush Trimming Unit Machine Benefits Technical Machine Benefits • Maximum edge band thickness: 8 mm • Machine length: 6760 mm • Belt top pressure: yes Extra Information Machine still under power

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Hjdsx A Tinopfx Ah Nofb Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: ready for operation (used), Year of construction: 2009, This HOLZHER CUT 70 6110 panel saw was manufactured in 2009. It features a cutting size up to 3900 × 3900 mm, a maximum cutting height of 70 mm, and saw blade projection of 82 mm. The main sawing unit has a motor power of 11 kW and a blade diameter of 350 mm. It supports a saw carriage and pusher speed of 0–70 m/min. Consider the opportunity to buy this HOLZHER CUT 70 6110 panel saw. Contact us for more information. • Workpiece • Cutting size: 3900 × 3100 mm or 3900 × 3900 mm • Max. cutting height: 70 mm • Max. saw blade projection: 82 mm • Sawing Unit • Motor power: 11 kW • Saw blade Ø: 350 mm • Rotational speed: 4070 rpm Scoring Unit • Motor power: 1.1 kW • Saw blade Ø: 180 mm • Rotational speed: 6070 rpm Feed / Carriage • Saw carriage & pusher speed: 0–70 m/min (continuous) • Return speed: 70 m/min • EU feed speed: 0–25 m/min Media • Compressed air: 6 bar, 32 NL per cutting cycle • Dust extraction: • Connections: 1×120 mm (base machine), 3×120 mm (pressure beam) Hjdpfx Ahsx Ut Iko Nefb • Capacity: 4500 m³/h • Air speed: 30 m/s Additional Equipment • Number of tables: 3

Condition: used, machine/vehicle number: 008258, X axis working area: 3500 mm Hsdpex A Hfcefx Ah Nofb Y axis working area: 920 mm Main Electrospindle power: 7 KW Number of controlled axes: 3 axes Total number of drilling spindles: 15 Total number of tool changer positions: 4

Condition: ready for operation (used), Year of construction: 2009, This 4-axis HOLZHER Pro Master 7123-320K was manufactured in 2009. It features a large working area with X stroke of 3200 mm, Y stroke of 1445 mm, and Z stroke max of 325 mm. Equipped with six workpiece supports and automatic table setup in X and Y directions, it enhances productivity in complex woodworking tasks. If you are looking to get high-quality milling capabilities consider the HOLZHER Pro Master 7123-320K machine we have for sale. Contact us for more information. • Axes: 4 • X Stroke: 3200 mm • Y Stroke: 1445 mm Hfedpex Ut Idjfx Ah Neb • Z Stroke: max 325 mm • Traversing Height with 2-Stage Milling Spindle: 428 mm • 6 workpiece supports, pneumatically clamped • 4 pcs. suction consoles each • Each suction console equipped with 2 vacuum cups • Table automatically set up in X and Y direction • Stop rows in X-direction, in front and behind