Used Holzher 1215 for sale (157)

Condition: good (used), Year of construction: 1988, functionality: fully functional, PLC control Workpiece thickness max 60 mm Edging thickness for roll material 0.4 - 3 mm Edging thickness for strip material 0.6 - 20 mm Edging thickness for strip material (without flush trimming) 30 mm Djdpfx Aeyntq Djdaour Minimum workpiece width 60 mm Minimum workpiece length 140 mm 1901 Automatic edge feed for strip/roll material 1907 Glue application for panel thickness up to 60 mm, "Ultra-Granu-Press" granulate heating time approx. 3 - 4 minutes 1911 Pressure unit up to 30 mm edging thickness 1916 End trimming unit 2 x 1.1 kW up to 30 mm edging thickness 1920 Flush trimming unit 2 x 1.1 kW up to 20 mm edging thickness 1966 Profile trimming unit, flush/chamfer/radius up to R = 3 mm 1927 Scraper unit, pneumatically controlled 1944 Buffing unit 2 x 0.15 kW, automatically actuated Feed rate 8/16 m/min Length 5720 mm

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. Dujdpfx Aoyngt Ssdaer The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Dujdpfx Aexiwvlodaor Manufacturer: HolzHer Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Duodpfxeyh Ilyj Adaor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Working area X: 4520 mm Working area Y: 1600 mm Working area Z: 300 mm 5-axis electrospindle unit, 12 kW power, liquid-cooled, HSK 63F interface Vertical drilling heads: 18 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Slotting saw in X direction 18-position tool changer (carousel) 1-position tool changer for saw blade Worktable with 8 bars WS8 clamping device, 200 mm Software: Campus V7 Plus CAD/CAM Vacuum pumps Safety platforms Red laser push button Duedpfxoyl Uw Ho Adasr Remote control panel PC-based control system Automatic centralized lubrication

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Duedpfxoyg H Hio Adaor Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Djdpfxeylpwuj Adasur Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Duedpfx Adeygn Ibjaor Location: Bavaria

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained Equipment and technical data: Console machine Processing size in X: 3,200 mm Processing size in Y: 1,470 mm Max. travel height in Z: 325 mm Milling unit 7939 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 stations Including stationary tool changer on the right side Including 7893 manual change magazine 8 consoles including 12 vacuum suction cups for four-field machining 4 pneumatically liftable and lowerable loading aids Including hand control device Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C-axis 7997 Horizontal drilling positions: 6 Vertical drilling positions: 16 Double drilling spindle in X Dujdpfeyf Rz Usx Adajr Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: Immediately Location: Hesse

Condition: used, Holz Her Accura 1556 Premium fully equipped, modern edge banding machine First delivered in 2021 Machine is in EXCELLENT CONDITION Available from stock in Lieboch Dedpfx Asyfndaodasur

Condition: used, Heavy-duty semi-automatic vertical panel saw for wood Her Supercut 1216 Cutting area: 5300 x 2200 mm Max. cutting depth: 80 mm Duodpfx Adjyffaloasr Swivelling control panel Central display for horizontal and vertical cuts Pneumatic lifting and lowering of transport rollers Pneumatic indexing for vertical cuts Pneumatic locking for horizontal cuts Pneumatic plunge of the saw unit Extraction at the cutting point Saw motor: 5.5 kW CE compliant Machine is FULLY FUNCTIONAL and in VERY GOOD CONDITION Available ex-stock Lieboch

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Dujdpfx Adeugmw Eeajr

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Dusdpfx Adjw Ebrxjaor Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Year of construction: 2021, functionality: fully functional, Return-Master 5920 return system, 4 years old. Duedpfsyhpynex Adasr Serviced by the top-tier Dimpex service team. Serious inquiries only!!!

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Dusdpfx Ajyamcwjdaor Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: used, functionality: fully functional, Edgebander HOLHER SPRINT 1417 features the following operations: - pre-milling - end cutting - trimming to precise length - milling cutters with radius - radius scrapers Dusdpfxoyg Er Rj Adaor - profile copying unit - flat scraper cleaners - polishing unit

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb. Dodsx E Ah Ijpfx Adaeur

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. Dodpfxex E A Dis Adajur In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,580 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 300 mm, tool diameter: 350 mm, Equipment: rotational speed infinitely variable, Machining Center 7235 Demonstration Machine Machining area: 4580 x 1650 mm. Maximum workpiece size for edge processing, minus cutter radius. Djdpfx Aex E Afmedasur Maximum panel width placeable: 1,660 mm. Maximum workpiece height: 300 mm. Simple and quick vacuum pod positioning with the Holz-Her VI.SE LED table. The various colored LEDs indicate the position of consoles and pods, including the rotation angle for swiveling pods. 8 consoles, each with 2 pods per console, and electronic stop position monitoring. The routing spindle delivers 13.0 kW of power and accommodates milling tools up to a maximum diameter of 200 mm via an HSK interface, as well as saw blades up to 350 mm. Ideal for heavy-duty machining, such as solid wood applications. 35 drilling spindles, comprising 25 vertical and 10 horizontal spindles. Two independent saw units, one in X and one in Y, each for saw blades up to 125 x 4 mm. 24-position rotary tool changer and 14-position pick-up changer, along with a single-slot saw blade magazine for 350 mm saw blades, offer maximum flexibility for tool setup. Safe Detect – safety monitoring system replaces foot mats or light curtains. Integrated waste conveyor belt in the machine frame. And many more equipment features. Delivery, installation, and operator training can be arranged by us at an additional cost. The machine is currently located in our dispatch warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is authoritative. Our General Terms and Conditions can be found on our website at holzher.de/en/agb.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Dusdpfxox Emf Ds Adajr Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2020, machine/vehicle number: 462/2-003, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt. Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Dusdpeyfg Dfefx Adajr Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Dujdpfxjyfgrpj Adasr Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls Dujdpfx Adsv D Nugsajr -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: good (used), roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 started box/ total approx. 7000 pieces -Type: 3.0x25 A2 stainless steel -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm Dodpfev D U A Aex Adaeur -Total weight: 12.7 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. Dsdpfsv D Nutex Adajur -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg