Used Hollow Shaft for sale (6,696)

Condition: like new (used), functionality: fully functional, Tool shaft for multi-saw PAUL K34G Cjdsqwg Swjpfx Ab Tjrk total length 850mm diameter 100mm

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Codpfjxrtt Eox Ab Tjrk Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Crodpfxet Urq Uo Ab Tok Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: good (used), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Also standard equipped with: - Magnet - Reversible fan Crsdpfx Aexraigjb Tsk - Remote control

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Cjdpexmd Shsfx Ab Tork Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: like new (used), Hollow face carbide saw grinder VOLLMER model MHZ Credpfxohcw N Es Ab Tjk

Condition: used, Type ID 900 Especially suitable for pasta Cedoxlpt Uepfx Ab Tork twin shaft with paddles all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Single-shaft shredder is equipped with good blade set -Manufacturer: Vecoplan, side mill granulator -Type: VAZ120/105 -Feed capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter knives: 1 piece -Inlet cross-section: 1240 xy 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Number: 1 cutting mill available -Price: per piece Crodpfxjxlcqto Ab Tsk -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Credpfsxqxbxex Ab Tek Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Cedpjxp Nm Nsfx Ab Tork Shredder located in Carlisle.

Year of construction: 1984, condition: excellent (used), • Year 1984 • 2x55kW main engines • Max saw blade diameter 300 mm • Max cutting height 200 mm • Track width 350 mm Crjdelrxfqspfx Ab Tjk • Shaft length 430 mm • Shaft diameter 60 mm • Inverter feed

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW Crsdpfx Abjbq Su No Tjk rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Credpexladwefx Ab Tek

Condition: used, Year of construction: 1995, Granulator / Knife Mill Manufacturer: CMB (France) Model: MS 610 NC Hjda Asxg Thrjza Spju Main motor: 90 kW Rotor length: 1000 mm Rotor diameter: 600 mm Rotor knives: 5 x 2 Stator knives: 2 x 4 + blower + big-bag station with cyclone Crjdpfx Ajxg Th Ssb Tok + water cooling The machine was dismantled from the customer's facility and is stored in our warehouse.

Condition: used, Operational mixer with the following dimensions: - mixing trough length: 260 cm - trough height: 125 cm - feed opening: 50 x 50 Cedpfx Abjxpi Tpe Tsrk - feed opening: 30 x 30

Condition: used, Year of construction: 2022, operating hours: 250 h, functionality: fully functional, machine/vehicle number: P3SRU02, total length: 9,111 mm, total width: 2,060 mm, total height: 3,347 mm, overall weight: 14,500 kg, hopper volume: 2,300 l, rotational speed (max.): 45 rpm, torque: 180,000 Nm, power: 129 kW (175.39 HP), The P3 tracked shredder is a compact and highly efficient two-shaft shredder which can be used in numerous applications from waste wood processing to construction waste. - Heavy duty full metal shafts which are easy to replace - Tiltable loading platform to feed the shredder - Easy service and maintenance access - More torque - Volvo Penta TAD581VE, 129kW at 2300 rpm engine - Equipped with wood & green waste shafts - Grid 100 x 120 Csdpfx Abexphy Ue Tsrk Machine is located currently in SPAIN

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes Csdpfxjxg Hano Ab Tork

Year of construction: 1996, condition: good (used), Shredding system, twin-shaft shredder, 2-shaft shredder, shredder, chipper, cutting mill, twin-shaft crusher, rotor mill -Shredder system: equipped with 24 cutting blades -Engine power: 7.5 kW -Speed: 28 rpm -Dimensions cutting blade: 250 x 19 mm -Filling nozzle 500 x 470 mm -Dimensions 650/1760/H470 mm -Weight 864 kg Codjvbylwspfx Ab Terk

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Cjdpfxongz N Io Ab Terk

Condition: used, functionality: fully functional, rotor diameter: 194 mm, number of blades: 23, type of input current: three-phase, rotational speed (max.): 975 rpm, rotational speed (min.): 975 rpm, rotor flight circle: 610 mm, working width: 500 mm, funnel diameter: 740 mm, sieve perforation: 25 mm, Wood Chipper / Shredder NAZZARENO K700 Industrial machine designed for shredding wooden elements, carpentry waste, battens, and wood blocks. Codjxnxr Ejpfx Ab Tsrk Manufactured by Costruzioni Nazzareno (Italy) – robust, industrial build offering high reliability.

Condition: excellent (used), - new main shaft for chipper canter type Linck V 25 - quantity one pair Crsdpfx Abexnm T Dj Tok - perfect condition

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Cedpfjxf E Rcjx Ab Terk Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 95 mm / 16 teeth -Tooth width: mm -Shaft: Ø 60 mm -Dimensions: see photos -Number: 14x gear shaft available -Price: per piece -Dimensions total: Ø 95 x 243 mm -Weight: 6.4 kg/piece Cedpfx Abexf Dqbs Tsrk

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos Crjdpfx Asxf A Nisb Tjk -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear Csdpfx Abexf A Eqe Tjrk -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece