Used Hollow Blocks for sale (3,422)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. Fsdpfx Aoz N Hdwel Aogh MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature Fedpfx Alszkkp Ie Aogh - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) Fgjdpfx Aoxalibsl Aeh - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: used, NANOCOLOR VARIO 3 / NANOCOLORVARIO3, Macherey-Nagel GmbH & Co. KG, Thermoblock Fodpfskn Nihox Al Aegh Model: NANOCOLOR VARIO 3 Condition: Used

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Fedpfjr It Swex Al Asgh

Condition: as good as new (ex-display), For sale Demag wheelblocks Fgedpeh Uqibjfx Al Aoh New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Fjdpfx Asl Hx Rpel Aogh

Year of construction: 1997, condition: excellent (used), For sale we offer a blockmold machine with the following specifications: Block dimensions: 1300 × 1040 × 5300/4000 mm – VARIO PLC control system: SIEMENS S7 Vacuum system pumps: SIEMENS Hydraulic system pump: BOSCH Fgodpfx Aen Tn Hrsl Ajh After being purchased by our company, the block mold underwent a comprehensive inspection, including the removal of all internal panels and thorough cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and is characterized by high efficiency. The offer also includes a complete set of documentation, including electrical, hydraulic, pneumatic diagrams, and technical drawings. We also have other EPS polystyrene production machines available for sale, such as: ICI CALDAIE steam generator (2000 kg/h) 2× steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTHS tank) 3× EPS block cutting lines 2× blockmolds Pre-expander (high-capacity continuous pre-expander) There is also the option to purchase a complete production line (including installation, commissioning, and operator training).

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: Fgedswiy Tvopfx Al Ash - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Year of manufacture: 1998 Complete machine documentation – several folders. Fgodpfx Aleychaie Ash

Condition: new, new and unused, only storage marks Fgedpfx Alsyc Emys Aeh

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Shipping within Germany per unit: €25.00 Manufacturer: KALORIK Fgedpfx Alswwrk As Ash All prices incl. VAT.

Condition: used, functionality: fully functional, 🏗️ FOR SALE: ILMAR Rapide 1250 Block and Paving Machine (Used) Excellent opportunity to expand or modernize your precast concrete production with a domestically manufactured machine (ILMAR), recognized for its robustness, reliability, and low maintenance costs. The ILMAR Rapide 1250 is a fully automatic industrial unit, ideal for high-volume production of a wide range of products with premium finishes. 📊 Technical Specifications and Capabilities Production Versatility: Produces blocks (standard and hollow), paving stones, road kerbs, and decorative pieces. Adjustable Heights: Capable of producing pieces with heights ranging from 5 to 30 cm. Bi-Layer Option: Perfect for paving stones with differentiated color or texture finishes. Fjdpfozgv Iuox Al Ajgh High-Strength Structure: Designed to withstand demanding compaction and industrial vibration cycles. 🔍 Equipment Condition: Used, in the mechanical and visual condition visible in the photos. This robust equipment is ideal for those seeking high productivity with an initial investment significantly lower than that of a new machine.

Condition: like new (used), HEMA Automatic Monoblock – Filler + Capper – ZALKIN – Stainless Steel HEMA / ZALKIN automatic filling and capping monoblock, designed to integrate the dispensing of the product and the subsequent placement and closing of caps into a single machine for industrial packaging lines. The unit combines a HEMA filler with a ZALKIN capping system, synchronizing both operations through a compact rotary configuration. The containers are automatically transported between the different stations, reducing transfers and providing a continuous filling and closing process. Its construction, primarily in stainless steel, complete enclosure, and integrated control panel make it particularly suitable for professional applications in the food and beverage industries. MAIN FEATURES -Filler manufacturer: HEMA -Capper manufacturer: ZALKIN -Type: Automatic monoblock filler + capper -Integrated operations: filling and closing -Industrial rotary configuration -Automatic container feed -Synchronized positioning and transfer -Multiple filling stations/heads -Automatic product dispensing -Automatic cap feed system -Rotary ZALKIN capper -Multiple closing heads -Automatic infeed and outfeed -Control panel with HMI -Construction primarily in stainless steel -Complete enclosure with transparent safety doors -Hygienic design for the food industry -Prepared for continuous industrial operation -Integrable into complete packaging lines PROCESS The containers automatically enter the monoblock and are positioned in the HEMA filling section, where the different stations perform the product dispensing. Once filled, the containers are synchronously transferred to the ZALKIN capper. The caps, previously fed and oriented, are placed on the containers and then closed by the corresponding heads. The finished containers exit continuously to the next stage of the line. It can be integrated with: -Container depalletizers -Rinsers/washers -Product feeding systems -Cap feeders and orienters -Conveyors -Weight checkers Fsdpfoynkdzjx Al Ajgh -Inspection systems -Labelers -Coders -Cartoners -Palletizers APPLICATIONS Particularly suitable for food industries, manufacturers of sauces and condiments, preserves, beverages, and other liquid or semi-liquid products that need to automate filling and closing simultaneously. Compatibility with products, filling volumes, container formats, and cap types will depend on the configuration and tooling currently installed. The combination of HEMA filling technology and ZALKIN capping in a single monoblock provides a compact and automated solution for industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Fodpfxevbcl He Al Aegh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Fgodpfx Asi Ri Hgjl Ash Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls Fgsdpfxji Ri Hnj Al Ash 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: used, mileage: 132 km, power: 151 kW (205.30 HP), first registration: 06/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,861 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Approved as a 3.5t vehicle * Engine immobilizer, electronic * Electrical terminal block and preparation for towbar wiring * "Climatronic" air conditioning system in the driver's cab * Front axle (1,800 kg load capacity) * Permissible total weight 3,500 kg * One towing eye at the front * Tow hitch, fixed * Standard wheelbase 3,640 mm (L3) * Fuel tank 75 liters * Preparation for alcohol interlock system * Complete N1 approval (up to and including 3.5 t GVW) Fgodpfjzahkpjx Al Aeh * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable lid, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cup holder * Three-point automatic seatbelts with height adjustment, 12V sockets in the driver's cab * Seatbelt warning system, E-contact in the seatbelt lock, driver and front passenger seat * 2 remote control keys * Keyless start * Auxiliary water heater, with remote control * Chrome package * "ergoActive" comfort seat with suspension on the driver's side * Double passenger seat on the right, with storage compartment and folding middle backrest * Seat covers in "Toronto Grid" fabric * Seat heating for driver and front passenger seat, separately adjustable * Wooden floor in the cargo area with wheel arch trim * Lashing rails (airline type) in the cargo area: side walls * Grab handle on the partition in the cargo area * Lateral interior cladding in the cargo area made of plastic hollow chamber panels, up to the roof frame * Partition, with cladding * Lashing eyes for securing cargo * MAN SmartLink * MAN Connect * Comfort telephony with inductive charging function, with connection to external antenna (LTE) * With voice control * Oyster Silver Metallic * Daytime running lights with assistant driving light and coming and leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Heated windshield washer nozzles * Footwell lighting * MAN TGE Individual Performance Kit 200 PS * MAN TGE Individual Lion S Package * MAN TGE Individual Lion S - Paintwork bumpers and side protection strips * 4 light alloy wheels 6 1/2 x 17 with 1,200 kg load capacity, in black * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors on the right and left, convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color (H3) * Rear step, over half the width * Grab handles on the rear pillars * Rear wing doors with enlarged opening angle * Windshield wiper intermittent operation with light and rain sensor * Sliding door, right * Laminated front windshield with heat-reflecting glazing * Digital instrument cluster * Tire pressure monitoring system * 4-cylinder turbo diesel engine 2.0 l / 130 kW (4V) BIT * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inches) * Emission concept, EU6e (EA) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * Start/stop system with brake energy recuperation * Assistance systems * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C Fedpfx Asxvr Upjl Asgh - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 2022, Overview SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment Fodpfxoz Hcb Ee Al Asgh - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: like new (used), overall weight: 200 kg, Year of construction: 2022, STEEL PRODUCTION TABLE TOPS, DIMENSIONS 1400X1200X15, CONDITION: GOOD. THE LISTED PRICE IS PER PIECE. AVAILABLE QUANTITY: 2750 PCS. Fgodpjx Ncdqsfx Al Ajh

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Fgodpfx Aexl S Uhol Aeh

Condition: used, This listing is for 1 of 2 Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. - The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. - The result is accurate, reproducible and safe heating of your samples. - There is a full range of models and options to cater for basic through to more sophisticated applications - choose from three digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and one digital high-temperature system (QBH2) with 2 blocks. These are complemented by an extensive range of interchangeable heating blocks to accommodate your sample tubes - from our standard range of blocks or tailored to suit your application. - In addition, for 2-block systems QBD2 and QBH2 we offer accessory blocks for accommodating microplates and microtube strips. - Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). - Rapid heat-up time. - Stability and uniformity ± 0.1°C. - Integral timer function optional external probe for in-sample or in-block temperature control. Fodpfexx Av Nex Al Aegh - Robust, compact, contemporary design. - Block extraction tool included as standard, for easy and safe removal of blocks.

Condition: used, machine/vehicle number: 04 897, consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap Fsdpfx Ajz Ibffol Aogh

Condition: used, Year of construction: 2002, ORYCON MAINFRAME 980F-09-S-A-EU REV2 This device is used in industrial plastic injection molding for precise temperature control in hot runner mold systems, utilizing multiple independent control modules. Power Supply and Construction • Input voltage: Can be connected to a 3-phase (400V) or 1-phase (230V) network, depending on the internal terminal block configuration. • Chassis (Mainframe): Robust, all-aluminum construction designed for demanding industrial environments. • Chassis capacity: The chassis features a modular design that is backward- Fgedpfsz Ilg Hex Al Aeh compatible with most common industrial control cards of standard dimensions. Control Cards (Modules) and Sensing • Control accuracy: Achieves high precision of ±0.5°C (or ±1°F) thanks to Orycon Hot Runner Systems microprocessor control. • Sensor types (Thermocouples): Supports industrial Type J (Fe-CuNi) or Type K (NiCr-Ni) thermocouples. • Unit display: Calibration and value display selectable in Celsius (°C) or Fahrenheit (°F). • Operating modes: • Closed Loop: Automatic PID control based on thermocouple feedback. • Open Loop (Manual mode): Percentage-based power control (suitable for emergency completion of work if a mold thermocouple is damaged).