Meccanotecnica Feedo Bookbloc feeder. For the automatic feeding of untrimmed, sewn, unglued, glued or perfect bound book blocks. feeding conveyer from the right.
Brphix0fzx
Max. Thickness: max.: 10 mm
Equipment / Additional information:
G9b0fx
With compressor
Max.Size: 305 x 425 mm
Min.Size: 110 x 130 mm
Bkmoqafneb
Speed approx. 3000-4000 cp/h
Including reflex light sensor for connecting to machinecycle (master)
weigth: 340 kg Brutto
Size: 1,2 x 1,3 x 1,6 m
Min. height conveyor 0,9 m (adjustable)
book block feeder
8sxto7mhf
book block feeder
G7rau9h
A very effective and flexible pressed blocks feeder that can be used in many different applications.
Fw08jxv
Power supply, power supply
-Input: 380 V 0.85 A
-Output: 24 V 20 A
Pt2ryq
-Dimensions: 280/105/H190 mm
-Weight: 10 kg
Metering screw (1x), Make Hethon Feeder Hengelo, Type 62-S-00, No. 930120288, Year of construction unknown, Material Stainless steel, Screw diameter 40mm, With hopper , Capacity ± 200 Ltr, Hopper sizes 600x600x550, Inlet dia. 300mm, Outlet dia. 110mm, With motor , Hopper with flexible wall , Floorspace 1,1x0,6 M, Total height 1,5 M, Weight 220 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any d...
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4
WITH DELIVERY BELT
Return belts
For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt
Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards.
CONNECTION TO PRINTING MACHINE
The STENZ FEEDER does not need synchronization. The feeder is guided by the handles
the pressure machine and sets the required height with the crank.
Imp...
Control: HEIDENHAIN
Axes
X axis travel mm: 1,060
Y axis travel mm: 710
Z axis travel mm: 710
Feed rate longitudinal/cross/vertical m/min: 15,000/15,000/15,000
Rapid traverse longitudinal/cross/vertical m/min: 30/30/30
Swivel head B axis degrees: 91 / +12
Work table
Dimension mm: D 800 / 1.500 x 800
Slot width kg: 550
Spindle
F3z8f0z
spindle speed rpm: 12.000
Spindle drive power kW: 15
tool holder: DIN 69871 SK40
Tool magazine capacity : 32
Machine hours:36950
Spindle hours:17998
1 shift operatio...
CE Glass Industries would like to attract your attention for the following possibility. We are one of the biggest glass-processors in Middle-East-Europe since 30 years.
CE Glass Industries selling used machines in good condition:
Ysgqxs
Sealing material Polyurethane
Type of B component Liquid
Type of pump Hydraulic
Volume of A component 200 l
Volume of A component 20 l
Length of arm 2400 mm
Assembled dimension 1000x1500x2400 mm
Voltage 400 V, 50 Hz
Power 5 kW
O...
Power supply, power supply, DIN rail power supply, switching power supply
-Input: 400-500 Vac / 50-60 Hz 2.2-1.8 A
2rwtfy
-Output: 24V 40A
-Dimension: 170/125 / H220 mm
-Weight: 3.1 kg
transformer
Manufacturer: Block B 0307086
Type: 160/92 / B2
Fabr. No. 401344
Cmwboevk
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4
WITH DELIVERY BELT
Bd9ljlmqrs
Return belts
For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt
Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards.
CONNECTION TO PRINTING MACHINE
The STENZ FEEDER does not need synchronization. The feeder is guided by the handles
the pressure machine and sets the required height with the...
I will SELL a production line for the production of EPS polystyrene (EPS Polystyrene Production Line)
Possibility of transport and / or connection of machines by our technicians.
AUTOMATIC POLYSTYRENE EPS PRODUCTION LINE
TECNODINAMICA / HIRSCH / POLIMEC / DAL ZILIO MECCANICA
The production line includes:
--PRE-EXPANDERS--
1. BATCH PRE-EXPANDERS
BATCH PRE-EXPANDERS (discontinuous) TECNODINAMICA mod. TV925, made of stainless steel INOX + dryer + injector + automatic dense control system, contro...
Autotransformer
Make: Block
Type: MSU 2420/03
Power: 3000 VA
400 V input / output 230 V or
Bag3uz38xr
Input 230 V / 400 V output
Power supply, power supply, DIN rail power supply, switching power supply
-Input: 400-500 Vac / 50-60 Hz 1,4-1,1 A
-Output: 24V 20A
Jicj9jz
-Dimension: 195/80/H175 mm
-Weight: 1,8 kg
Equipment / Additional information:
Delivery belt
Designed for heavy-duty use at maximum printing speeds.
Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap.
The...
Transformer
2hpuorwh
Make: Block
Type: B 9601085
Capacity: 8000 VA
Input: 3 x 230 V / 21.0 A
Output: 3 x 400 V / 11.6 A
or
Input: 3 x 400 V / 11.6 A
Output: 3 x 230 V / 21.0 A
PLC control, electronic module, noise filter
-Block .: B 0901031
-UR: 520 V 50-60 Hz 30 Aac
-Dimensions 270/70/H95 mm
Ccs9pfp
-Weight: 1.7 kg
Ring variable transformer, transformer
-Prim: 230 V 2.0 A 50-60 Hz
Cldkal7q
-Sec: 260 V/
Inrush current limiter
Cy9lykuc
-Type: ES00
-Rated voltage: 220 V to 400 V.
-Rated frequency: 50 Hz to 60 Hz
-Continuous current: max. 16 A
-Price: per piece
-Number: 3x available
-Weight: 0.3 kg
Vibro feeder , Make Scan-Vibro A/S (DEN), Type TRK 600x300x2000, No. 27511, Year of construction 1997, Material Stainless steel 1.4301 (304), Feeder width 600mm, Feeder length 2000, Feeder height 300mm, Closed , Inlet dia.200mm, Outlet dia.200mm, dia.100mm, With vibro motor (2x) 0,5KW, 400 Volt (Ex), Mounted on frame , Floorspace 3,0x1,0 M, Total height 2,5 M, Weight 615 KG, Extra Specifications with sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3) Wh...
Micrometer, micrometer screw, gauge block box, gauge blocks, ceramic gauge blocks, ceramic gauge block set, gauge blocks
-Manufacturer: Mitutoyo, ceramic block set
-Parallel gauge blocks: 88 pieces
-Content / nominal dimensions: see photos
-Dimension box: 340/195 / H65 mm
Dsj07i9
-Weight: 3.1 kg
Standard investor similar products
Hswz7v8
Field of application: Construction
VAT/margin: VAT deductible
Bb0zhqb
GMP Protopic Plus 520B laminator + Belt feeder 35
The machine is in very good condition.
It is an advanced machine with high efficiency.
Korea production.
Possibility to work in a full or semi-automatic machine.
Technical data:
Max sheet format: 520mm x 800mm
Min sheet format: 210mm x 200mm
Min weight: 120 gsm
Max weight: 350gsm
Working temperature: 80-140 ° C
Max working speed: 15m / min
Weight: 370 kg
230V power supply
Installed power of 2.5kW
In addition, air 6 Bar.
A steel cylinder covered w...
Vibro feeder (1x), Make Vibra, Type FRU 31.9/4-DV, No. 37907, Year of construction 1997, Material Stainless steel, Feeder width 400mm, Feeder length 3000mm, Feeder height 240mm, Inlet 320x600mm, Outlet 500x400mm, With vibro motor 2x 0,7 KW, 400 Volt, Floorspace 3,3x0,8 M, Total height 1,5 M, Weight 500 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to i...
Linear bearing, guide carriage
-Type: SHS25C1SSC1 (GK) block
-Price: per piece
Fh033il
-Number: 2x available
-Weight: 0.8 kg/piece
Plucking sheet feeder
0nzmys8a
TECHNICAL SPECIFICATION OF OPTI-KAP 200 OPTIMIZER
- 7.5 kW main saw motor
- material feed speed 160m / min
- max saw diameter 550 mm
- length of the processed material 300 x 6300 mm
- width of the processed material 20 x 300 mm
- thickness of the processed material 10 x 100 mm
- minimum cutting length 25 mm
- error tolerance on the length of 1000 mm - +/- 0.1 mm
- pneumatically controlled saw
- servo controlled eccentric system
- air demand 300l / min 6 Bar
- waste discharge 1500 m3...
Köra Packmat Basic Feeder
Functional, in good condition.
Information of the manufacturer:
The unit has been specially developed for the medium output range and covers clocked dispensing rates of up to 80 products/min.
Even single sheets down to a minimum of 80 g/m² can be separated and fed selectively with this device.
The BF2 BasicFeeder impresses with its ease of operation, adjustment and maintenance. Thanks to the removable and newly positioned control unit, the BF2 BasicFeeder can be used ...
Machining centre vertical DMU 80 mono Block
Producer: DMG
YP: 2005
Control Heidenhain ... TNC 530
Clamping table area ... 1270x700mm
Axis X ... 980mm
Y axis ... 630mm
Axis Z ... 630mm
Br9ul3qztv
Spindle speed ... 20-12000 / min.
controlled axes ... 3
cooling ... 40bar
SK 40
Magazine locations ... 32
Max. Table load ... 650kg
The machine is in good condition and can be tested under power.
Vibro feeder (1x), Make Vibra, Type DV-C4/60, No. 26380, Year of construction 1987, Material Stainless steel, Feeder diameter 200mm, Feeder length 3000mm, Closed , Inlet dia. 200mm, Outlet dia. 140mm, With motor 0,44 KW, 220/380 Volt (2x), Floorspace 3,0x0,9 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherla...
The machine is in good technical condition, by prior arrangement the possibility of testing. - Main spindle bearing diameter 100.00 mm - maximum bar diameter 60 mm - maximum machining length 250.0 mm - spindle collet DIN-173E42B - spindle end A2-5 - spindle bore 62.0 mm - spindle speed 5000 rpm - spindle power 11 kW - C axis 0.001 counter spindle: - maximum bar diameter 42 mm - maximum machining length 100 mm - spindle collet DIN-173E-42B - spindle end A2-5 - maximum workpiece insertion into the...
Permanent magnet block (unused)
Brand: LKoreman
Block: 320 mm length 1200 mm, width 850 mm, height.
Bfk7peoltv
Heavy duty
2 PCs in stock:
Our company, which has 20 years of experience operating in Izmir Turkey, in the market of Concrete Block and Bims Block (Parquet, Curb Block etc.) machines.
"25 'AUTOMATIC CONCRETE BLOCK PLANT -WITH
WHEELBARROW"
*Pallet driving unit_1 piece
* Machine pallet magazine_1 piece
* Pallet cleaning unit_1 piece
* 25 'automatic concrete block machine (double warehouse double WHEEL)
**Briquette mold_1 piece (20x40x20) cm.or 8cm.Paving Stone
** Hydraulic tank with cooling unit_1 set
**...
Agie STB-06 A1 Signal Terminal Block Zch.Nr. 621802.8 ,used, little traces of use, 100% functional, scope of supply according to photos
Br8w9ile
Vibro feeder (1x), Make Jöst Dülmen, Type RUF, No. 0670568, Year of construction 2006, Material Stainless steel 1.4541 (321), Feeder diameter 260mm, Feeder length 2300mm, Closed , Inlet dia. 250mm, Outlet dia. 145mm, With motor 0,65 KW, 380-440 Volt (2x), Mounted on frame , Floorspace 2,5x1,0 M, Total height 1,9 M, Weight 500 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwi...
Field of application: Construction
Dqi7lejz0
VAT/margin: VAT deductible
Electric magnet block.
Brand: Krupp.
Block: L = 1650 x B = 1200 x H = 600 mm.
Busfjm7m
Power block = 7 kW, 35 amp.
Weight about 3.5 - 4 tons.
Including rectifier (new).
Vibro feeder "Spiral conveyor" (1x), Make Vibra Offenbach, Type WF 8/4-50-DV, Year of construction 1996, Material Stainless steel, Feeder width 190mm, Feeder length 5000mm, Feeder height 75mm, Open , Outlet height ± 6000mm, With motor 2x 2,0 KW, 230/400 Volt, Mounted on frame , Floorspace 1,3x1,3 M, Total height 6,0 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are...
2 Mecatherm Baguette Linien BLOC RT2,
Capacity: 5000 pieces/h
OPTION: Proofer, Tray Transport & Oven FS 60
Owhhj
