Used Hole Plate Press for sale (39,537)

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! The offer includes: Dsdpfx Aexyh Rhob Tsla Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Note: The green unit outside is not included in the system.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, empty load weight: 13,200 kg, working width: 1,100 mm, workpiece height (max.): 35 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Dlodpfexyi Rpox Ab Toa Working length: 2,350 mm Working width: 1,100 mm Max. machinable thickness: 35 mm Part dimensions max. Max. panel size: 1,100 mm × 2,350 mm Film width min. Min. film width: 1,300 mm MACHINE DETAILS Installed power: 38 kW Dimensions & weight Heating plate dimensions (W × L): 1,400 mm × 2,600 mm Usable surface (W × L): 1,180 mm × 2,430 mm Weight: 13,200 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Dlsdpfxoxyi Iho Ab Toa Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 83261, controller model: HACO BC59T Graphics, bending force (max.): 250 t, working width: 4,300 mm, distance between stands: 3,800 mm, TECHNICAL DETAILS Dedjx Ahktepfx Ab Tola Pressing force: 250 t Max. working width: 4,300 mm Distance between uprights: 3,800 mm Backgauge depth: 1,000 mm Number of axes: 6 (Y1, Y2, X, R, Z1, Z2) Crowning system: CNC-controlled Punch holder: Quick-release MACHINE DETAILS Control unit: HACO BC59T Graphics Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,300 x 2,900 mm Weight: 18,700 kg Transport packages: 1 pc. EQUIPMENT Finger protection CE marking

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much Dsdpfxev Dm Uds Ab Tjla more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Dledpfx Aex A Hfvsb Toa Max feed speed: 40 m/min

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6212 mm Measurements depth 5436 mm Measurements height 2342 mm Machine weight 21500 kg Main Drive Number of axis 4 Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 37 mm Turret Number of turrets 1 Additional Equipment Air-blow oil-mist lubrication Slug-vacuum system Digital tool ID / barcode system Integrated tapping: inch/metric taps (M2.5–M8) Marking & deburring tools: on-board marking and deburring options This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Application Types Dodox Efbzjpfx Ab Tsla Punching

Condition: used, Year of construction: 1996, Press area: 3000 mm x 2100 mm Pressing depth: Vertical pressing elements: 5 Pressure build-up: manual hydraulic Pressing pressure: Cylinder stroke: approx. 100 mm Machine length: 3000 mm Machine width: 800 mm Machine height: 2500 mm Dljdpfxjwv Ncmo Ab Tsa Weight: 2000 kg

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack Dljdowtmi Eepfx Ab Tea

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Make: TRUMPF Model: TruBend 7018 Year: 2008 Technical Specifications Manufacturer: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Press force: 18 t Stroke: max. 150 mm Bending length: 510 mm Distance between uprights: 422 mm Connected load: 5 kVA Required space: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - TRUMPF TASC 6000 integrated control system - Safety light curtain (front) - Backgauge system: 6 axes, X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety Features - Side-mounted swing doors - Two-pedal foot switch for both stand-alone and seated operation Dsdpfx Asx Ebtyob Tjla - CE marking All information subject to change. A powered demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Dledpex D U N Sefx Ab Tea

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Dodpsx A Hfpofx Ab Tjla Max length workable: 2600 mm Max height workable: 1300 mm

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4500 kg Main Drive Pressing force 500kN Stroke 200mm Additional Equipment Robot Motoman This AMADA HFBO 50 20 press brake was manufactured in 1996. It features a maximum pressing force of 500kN and a stroke up to 200mm. Operating on 400V 50Hz with a power requirement of 6kW, it weighs 4500kg. Consider the opportunity to buy this AMADA HFBO 50 20 press brake. Contact us for more information. Dodpfx Ajx D Nnvob Tela Application Types Bending

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric Dlodpfxjx Edl Es Ab Tea heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: used, functionality: fully functional, Year of construction: 1978, Used 3-meter guillotine shear from Luther Werke Model: TS H 30 6 Capacity: 3100 x 6 mm Electric guillotine shear Year of manufacture: 1978 Dedpfxex D Uwpj Ab Tela

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5500 kg Main Drive Number of axis 3 Additional Equipment Laser Guidance: Ensures precise and fast operation. Dljdpfx Ajx D Sfkeb Tsa High-Speed Modes: Extremely efficient and quick operating capabilities. User-Friendly Programming: Easy-to-use interface with a large memory capacity, capable of storing over 10000 part files and programs. This 3-axis Safan E-Brake 80-2550-Ts3 CNC press brake was manufactured in 2006. Ideal for precision bending applications, it offers robust performance and reliability. Consider the opportunity to buy this Safan E-Brake 80-2550-Ts3 CNC press brake. Contact us for more information. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 4-meter guillotine shears from Haco Model: HSL 4010 Dedpox D Uvrsfx Ab Tjla Capacity: 4100 x 10 mm Electric back gauge Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 4000 kg Main Drive Pressing force 400 kN Stroke 200 mm This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Bending Dledpfx Abjx D H Dne Toa

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Main Drive Pressing force 1700kN Dodpfx Aox D S H Ujb Tela Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Year of construction: 2001, condition: ready for operation (used), General Data Dodpox D Rp Usfx Ab Tela Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Stamping

Year of construction: 2007, condition: ready for operation (used), General Data Dljdpfxox D Diue Ab Tja Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Measurements height 2810 mm Machine weight 6400 kg Measurements depth 2140 mm Main Drive Number of axis 6 Dedpfx Absx D Eans Tola Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2200 mm Measurements depth 4100 mm Measurements height 3470 mm Machine weight 23500 kg Control Unit Brand DELEM Model DA-66T Main Drive Spindle motor power 35 kW Pressing force 440 tons Bending length 3100 mm Number of axis 4 Media Air pressure 290 bar Additional Equipment Dlodpfxox D Nu Aj Ab Toa Control Console: Double footswitch console This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,846 h, General Data Measurements width 1470 mm Measurements depth 1550 mm Measurements height 2250 mm Machine weight 5400 kg Main Drive Pressing force 40 tons Bending length 1250 mm Dledjx D Nncspfx Ab Tja Number of axis 4 Movement X-Axis Movement 1000 mm Clamping Unit Max open daylight 455 mm This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm, pressing force of 40 tons, and a throat depth of 410 mm. The machine includes a main motor power of 5.5 kW and a hydraulic oil capacity of 140 liters. Consider the opportunity to buy this Baykal APHS 125040 press brake. Contact us for more information about this machine. Application Types Bending

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Model DA-65 Brand DELEM Additional Equipment Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Dsdpfx Abox D Ec As Tola Bending