Used Hold Her Sprint for sale (11,007)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Ndodpfxsvymdqo Affsf Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1994, volume capacity 5,63 m³/min Ndedpstqql Rjfx Affjf suction 1 bar pressure 8 bar turning speeds 3000 U/min engine output 37 kW weight of the machine ca. 660 kg dimensions of machine L x W x H 1,35 x 1,05 x 1,43 m

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Njdpsv Rwltjfx Affsdf Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Year of construction: 2006, condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Parts shown by hand not come. Ndjdpfxelbmy Us Affsf

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Nodpfx Afovgbcuefjdf Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. Nodpfxewn Nuao Affjdf ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Nodpfevzyblsx Affsdf Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h EQUIPMENT - CNC control: Fanuc 16iT Ndsdpsw Em Dmofx Affjf - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Ndsdpfx Ash Ux Susffjf Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Njdpfx Afjv Im Ulefodf

Condition: excellent (used), Year of construction: 1997, operating hours: 65,543 h, functionality: fully functional, machine/vehicle number: 501637, rotational speed (max.): 4,500 rpm, bar diameter (max.): 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar loader: Irco RBK 7212, built in 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool carrier Number of tools: 8 Shank diameter according to DIN 69880: 30 mm Number of driven tool stations: 4 Ndedpfewkp Ifox Affsf Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool carrier 1 speed: max. 4,000 rpm Tool carrier 2 speed: max. 4,000 rpm Slide 1 Transverse travel / Longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X: 15 × 25 mm Thread spindle pitch Z: 15 × 32 mm Slide 2 Transverse travel / Longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions including bar feeder and chip conveyor (LWH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Holder for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - Including 2 tool holders

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Ndedjv E Hk Iopfx Affjf Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter (max.): 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Njdpevviwxsfx Affsdf Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Sprint 555 Year of manufacture: 2007 Nsdpfx Afjvt N Dyofedf Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach

Condition: reconditioned (used), Year of construction: 1995, machine/vehicle number: 9511/5376, workpiece height (max.): 40 mm, working width: 1,200 mm, number of spindles: 1, table width: 1,300 mm, table height: 900 mm, working height: 900 mm, pressure: 6 bar, workpiece width (max.): 1,200 mm, KOCH drilling and dowel insertion machine Type SPRINT PTP Workpiece dimensions Workpiece length (Y) 100 - 800 mm Workpiece width (X) 20 - 1200 mm Workpiece thickness (Z) 10 - 40 mm Machine equipment - Horizontal drilling station with one drilling spindle -Drill holder Ø 10 mm - Dowel hole blow-out and extraction system - Glue application and dowel insertion station with a DW34 dowel tool for dowels Ø 8 mm - ELC electronic glue monitoring system - Vibratory conveyor - Glue pump 1:1 - Workpiece support table 1300 mm wide - 1 stop each left and right - Mechanical digital displays for height adjustment (workpiece thickness) -PC positioning control Ndjdperc A Nwefx Affsf

Condition: used, mileage: 4,911 km, power: 26 kW (35.35 HP), first registration: 06/1991, overall weight: 2,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, maximum load weight: 635 kg, empty load weight: 1,365 kg, gearing type: mechanical, suspension: other, total length: 3,000 mm, number of seats: 1, Non-binding offer – subject to change and prior sale – sale takes place under exclusion of any warranty – all information is provided without guarantee! Company holidays from 20.12.2025 to 04.01.2026, our business will be closed. We wish you happy holidays and a successful new year. We are closed from 21.12.2024 up to 05.01.2025. We wish you a merry Christmas and a happy new year. Njdpfx Ajxufn Teffjdf

Condition: excellent (used), functionality: fully functional, power: 50.01 kW (67.99 HP), fuel type: diesel, fuel: diesel, gearing type: hydrostat, Year of construction: 2016, Equipment: air conditioning, all wheel drive, car registration, hydraulics, HOLDER C70SC Municipal implement carrier with winter service equipment Accessories: Ndedpfxexa Arto Affof 1. KUGELMANN B160/74 snow plow blade with a maximum clearing width of 160 cm 2. KUGELMANN Duplex silo spreader with 600 L capacity and control panel This HOLDER C70SC implement carrier was built in 2016, has only 1,052 operating hours according to the meter, and is in well-maintained overall condition, showing the typical signs of use and wear for this equipment class. Maintenance service has been freshly carried out. - Net price: €46,974 // Gross price: €55,900 - Viewing and test drive are welcome - Nationwide shipping can be arranged; shipping costs depend on the distance - We would be happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier Ndodegu D Rmepfx Affjf - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: used, power: 33 kW (44.87 HP), Year of construction: 2010, operating hours: 2,910 h, Equipment: cabin, front linkage, * Stoll body-mounted vacuum cleaner with supports * Platform body * Articulated steering * Front mounting with hydraulics & PTO shaft Nsdpovhv Smofx Affsdf * Rear mounting bracket with PTO shaft * Working lights & rotating beacon * 3000 kg gross vehicle weight * 31x15.50-15 tires ----- Errors & omissions excepted, subject to prior sale Vehicle number 5058

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release Nsdpfx Aexv A Nqjffedf The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges the buyer to collect the item punctually between 26/01/2026 and 29/01/2026! Accessories include: approx. 36 tool holders, 2 tool carrier systems. Ndsdpfxsxqmx Sj Affof

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 32 units available Nodpfsxpilxox Affsdf For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2019, operating hours: 783 h, HOLDER C55 TC Municipal implement carrier with winter service equipment Accessories: 1. KUGELMANN B140/67 snow plow blade with a maximum clearing width of 140cm 2. KUGELMANN silo spreader with a 550l capacity and control panel This HOLDER C55 TC implement carrier was first commissioned in 2019, has only 783 operating hours according to the meter, and is in a very well-maintained overall condition with the usual signs of use and wear typical for this equipment class. - Net price €55,378 // Gross price €65,900 - Viewing / test drive welcome - Nationwide shipping can be organized; costs depend on distance! Ndedpfxexbf Rzs Affef - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2019, Equipment: all wheel drive, HOLDER C65 SC Municipal implement carrier with winter maintenance equipment Nsdpfx Ajxbf Nkjffodf Equipment included: 1. FIEDLER KVS-1205 wedge vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper This HOLDER C65SC implement carrier was first commissioned in 2019, has only 88 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of use and wear for this equipment class. Recent service completed. - Net price: €57,900 // Gross price: €68,900 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized; shipping costs depend on distance. - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2019, operating hours: 78 h, Equipment: air conditioning, all wheel drive, hydraulics, HOLDER C65 SC Municipal implement carrier with winter service equipment Included equipment: 1. FIEDLER KVS-1205 wedge-vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper This HOLDER C65SC implement carrier was first commissioned in 2019, has only 78 operating hours according to the meter, and is in well-maintained overall condition, displaying the typical signs of use and wear for this equipment class. Maintenance service has been freshly carried out. - Net price: €58,740 // Gross price: €69,900 - Inspection / test drive available on request - Nationwide shipping can be arranged; costs depend on distance. Nedpfx Afsxg Hwgjfodf - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!