Used High Pressure Casting Machine for sale (79,904)

Condition: good (used), URACA KD716 High Pressure Pump Electric Driven High Pressure Pump 28mm Two speed motor; 450 bar at 84 ltr/min at 1500 rpm Kodpfxjd Hnyys Ah Nsdg 450 bar at 42 ltr/min at 750 rpm

Condition: like new (used), Woma 150Z P16 Kodpfjd Hny Asx Ah Nsdg 2000 bar at 20 ltr/min at 1800 rpm

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 Kedpfof Dybzsx Ah Nsdg High Pressure Pump in New Condition 300 bar - 84 ltr/min - 1500 rpm 300 bar - 101 ltr/min - 1800 rpm

Year of construction: 2007, condition: like new (used), machine/vehicle number: A7.01077.0336, Hammelmann Electric Driven High Pressure Unit 950 bar 38 ltr/min Kdodpfx Ahjdt Uyue Njg 400V 50Hz complete unit in new condition without controls and motor starter

Condition: like new (used), High Pressure Pump 260 bar 60 ltr/min at 1500 rpm and 30kW (current configuration) 600 bar 60 ltr/min at 1500 rpm and 66kW 600 bar 90 ltr/min at 2200 rpm and 97kW Kdedpfx Ahed Hniuo Nsg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Kdedpfxoxb Dp Aj Ah Neg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition Kodpfxethuzpj Ah Nsdg

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Ksdpfsh R D Uzjx Ah Nedg Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Measuring and marking plate cast steel gray cast iron heavily ribbed STIEFELMAYER from a measuring or scribing machine with hand-guided measuring arm Machine. No. 8530979 Year of construction approx. 1989 length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm panel thickness 70 mm throughout - surface machined laterally at a 90° angle 3000 x 360 mm - 6 height-adjustable feet - plus 1 measuring arm, mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm space requirement L x W x H 3000 x 2000 x 2500 mm weight approx. 5000 kg very good surface Kdedpfodzqpzox Ah Neg

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with water-cooled rectifier block Performance data: Total power at 50% duty cycle: 210 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Primary connection: 380 volts, 50 Hz (three-phase) Consisting of three transformers – single transformer data: Power at 50% duty cycle: 70 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on the secondary side - Direct current power output connection via contact surfaces 50x50 mm, thread M20x1.5 mm - Temperature monitoring at each rectifier element and each transformer coil - Connection cable: 7 cores, cross-section 50 mm², approx. 6 m long Overall dimensions (W x H x D): 700 x 710 x 440 mm Total weight: 480 kg In good condition Kdedpjdzp Txjfx Ah Njg

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new Kdodpfjfupadjx Ah Neg No submersible pump or submersible pump

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling Kdsdpfxequzfcs Ah Nsg - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition

Condition: like new (used), Year of construction: 2024, operating hours: 140 h, functionality: fully functional, total width: 1,900 mm, total length: 3,800 mm, total height: 2,000 mm, operating pressure: 2,500 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 1,950 rpm, empty load weight: 2,500 kg, fuel tank capacity: 140 l, noise level: 109 dB, power: 148 kW (201.22 HP), Equipment: type plate available, Den-Jet CDT200-2500 Pressure: 2500 bar Flow rate: 25L Engine power: 200 hp A lease purchase is also possible. The full manufacturer's warranty is still available. Kodjxawf Iopfx Ah Njdg Contact: +436677994594

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain Kedpfx Aswtzpysh Nodg - Propane burner - CSA approved

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! capacity 500 m3/h Ksdpfx Aog Th S Ajh Njdg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Kdsdjrhidmopfx Ah Nsg Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Ksdpfsr A Dm Iex Ah Njdg Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min Kedpfsg Rgvhjx Ah Nsdg 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks.

Condition: used, High-pressure piston compressor Manufacturer: ATELIER FRANÇOIS Model: CE 2B Year of manufacture: 1993 Nominal capacity: 390 m3/h Current capacity: approx. 300 m3/h Pressure: 40 bar Kjdpfew Tmfxjx Ah Njdg Technical condition: used, requires technical inspection, control cabinet missing

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Kdedpsrzuwmsfx Ah Neg Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Year of construction: 2022, condition: as good as new (ex-display), High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: Kdedpfoiky H Ssx Ah Njg - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Working pressure: 490 bar Delivery rate: 59 l/min. Drive speed: 1800 RPM Driving power: 65 kW with AC 55 kW 3~motor AH 250 M-4; 400V; 50 Hz with frequency converter dimensions LxWxH: approx. 1665x1212x1641 mm Ksdjd Rmqpopfx Ah Nedg weight: approx. 1050 kg year of construction: 2008 Condition: in very good used condition. Including complete documentation.

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm Kdodpfx Ahsg Rgrps Njg X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min Ksdpfx Aeg Rgq Soh Nodg 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min Kodpfx Aheg Db Tae Nedg