Used High Pressure Casting Machine for sale (79,588)

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Hjdpfx Aowgi Siocnet Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, machine/vehicle number: XL9HP520004009032, axle configuration: 1 axle, Year of construction: 2005, High-pressure flushing and cleaning trailer mounted on a chassis, manufacturer: Rioned B.V., Tilburg (NL), type: UniJet, year of manufacture: 2005, serial number: XL9HP520004009032, pump type: P-30 SP-6115. Hodpozvu Thsfx Acnot

Year of construction: 2008, condition: excellent (used), Stationary high-pressure pump unit Hammelmann HDP 77 on a base frame. Similar to/not an Uraca, Woma, or Kamat. Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3~ motor AH 250 M-4; 400V; 50 Hz with frequency inverter Dimensions L x W x H: approx. 1665 x 1212 x 1641 mm Weight: approx. 1050 kg Hjded Rmqpopfx Acnjt Year of manufacture: 2008 Condition: in very good used condition. Includes complete documentation.

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Hsdporzuwmjfx Acnot Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system, pressure boosting cylinder, pressure boosting -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE Hjdpfx Acszfgb Ajnst -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

Condition: used, Year of construction: 2015, machine/vehicle number: 15068203, operating pressure: 150 bar, type of input current: three-phase, input voltage: 400 V, fuel: liquefied natural gas (LNG), input current: 12 A, noise level: 77 dB, input frequency: 50 Hz, Two Thermat high-pressure cleaning units with control panel, pressure gauge and hose connections. Details: Brand: Thermat Model: HRG 800/150 Eco Number of units: 2 Hedpfjzvf S Iex Acnst Fuel: natural gas Heating capacity: Bw 77.8 kW / ow 70 kW Electrical: 400V 3Ph N PE, AC 50Hz Nominal power: 4.2 kW Nominal current: 12 Amp. Max. operating pressure: 150 bar Working pressure: 150 bar (high-pressure), 30 bar (steam stage) Temperature: 90 °C (high-pressure), 105 °C (steam stage) Capacity: 13.3 l/min (high-pressure), 5 l/min (steam stage) Noise level: 77 dB(A) Machine number: 15068203 Product ID No.: CE0085AP0679 Year of construction: 2015 Contents: Various hoses/couplings 2 spray lances with handle Condition: Used

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Hodpfx Acozivhtonst Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. The system is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Location: Neusäß, near Augsburg. Hsdpfozvc A Rox Acnjt Condition and dimensions can be seen in the pictures.

Condition: excellent (used), Year of construction: 2018, operating hours: 332 h, functionality: fully functional, In perfect condition. Hodjzu Ty Depfx Acnjt

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance Hsdpfx Acszu Avbjnot

Condition: used, Year of construction: 2011, operating hours: 20,155 h, functionality: fully functional, machine/vehicle number: E807024, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 3,000 rpm, table width: 600 mm, table length: 850 mm, total height: 2,750 mm, total width: 2,870 mm, total length: 3,390 mm, type of input current: three-phase, workpiece weight (max.): 800 kg, overall weight: 7,500 kg, distance table to spindle center: 560 mm, input current: 63 A, For sale: a professional, high-speed machining center of the HSC (High Speed Cutting) class. The machine's main advantage is its exceptionally efficient spindle, reaching up to 30,000 rpm, mounted on a precise HSK-50E taper. Combined with a rigid and heavy construction (weight approximately 7,500 kg), the machine guarantees perfect surface quality, rapid milling speeds, and the ability to operate stably with micro-tools. An ideal choice for the precise machining of molds, dies, aluminum parts, light metals, and plastics. Technical specifications: Spindle and drive (main HSC advantage): • Spindle speed: 3,000 to 30,000 rpm (High Speed Cutting) • Spindle taper: HSK-50E (ensures excellent balance and safety at high speeds) • Spindle motor power: 15 kW Dimensions and working area: • Table dimensions: 850 x 600 mm • Maximum, uniform table load: 800 kg • Dimensions of T-slots: 16 mm x 5 pcs. • Footprint (overall dimensions): 3390 x 2870 x 2750 mm Travel ranges (axes): • X-axis travel: 800 mm • Y-axis travel: 600 mm • Z-axis travel: 400 mm • Distance from spindle to table surface: 160 – 560 mm Hedpszuzp Hefx Acnot Dynamics and accuracy: • Positioning accuracy: ±0.005 mm • Positioning repeatability: ±0.0015 mm • Maximum working feed rate: 20 m/min • Maximum rapid feed rate: 30 m/min Tool magazine and media: • Tool magazine capacity: 16 tools • Maximum tool diameter: Ø20 mm • Dielectric fluid tank capacity: approx. 200 liters Power supply and installation: • Power requirement: 45 kW • Preferred fuse rating: 63 Amp (time-delay “C”)

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Hjdpfx Acezinzlsnet Weight 45 kg Good condition

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Hjdpsqu Ubuofx Acnst

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Hjdpfx Aoxxa T Eecnjt

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Hedpfx Acjza E Rmjnot

Condition: good (used), 1 used high-pressure machine vise Manufacturer: Allmatic Type: 160 Technical specifications: Jaw width: 160 mm Clamping range I: 0 mm – 152 mm Clamping range II: 147 mm – 302 mm Clamping force: 60 kN Weight: 60 kg Base body height: 137 mm Jaw height: 50 mm Support height: −0.0585 mm Hjdpfx Acew Sdxgjnet L4: 613 mm – 915 mm 2 units available

Condition: used, Year of construction: 2008, High-speed radial drilling machine Alzrapid 32 With MK4 tool holder Quill feed, Thread cutting device, Operating manual. Hedjzhbl Uopfx Acnst

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Hedpfx Acjzuarmsnst Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: Hsdpfx Acszuaftonst • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Hodpfxsztut Ao Acnjt Technical data Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Extensive Kärcher accessories included The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: used, machine/vehicle number: 4131, Item No. Lg 34422 Hodjinzdlspfx Acnet High-performance stamping press BRUDERER BSTA 60 H from current production. Stroke adjustment needs to be repaired. without soundproof cabin and without conveyor system. Feeder BBV 202/120

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Hjdpfx Aoy Ttrtocnst Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: good (used), Technical data are shown on pictures. Hjdpfxsp N Aq Ho Acnot

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox Hsdpfeztdz Aex Acnet - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. Hodpfx Acoq Ru Amsnot It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland.