Used Hermle U 630 T for sale (145)

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door Kdedexcp Slepfx Ah Njg - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light Kedpfxsxcp Sre Ah Nedg The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) Kjdpfx Asxcp R Ieh Njdg - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° Kdjdpfx Asuyl Tboh Nog max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - incl. 32x HSK 63 holders - incl. 10x collets Also available as a production cell (2x Hermle C 30 U + Kuka Automation)

Condition: used, Year of construction: 2014, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° Kodpfx Ahjuyl Ths Nsdg max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - incl. 32x HSK 63 holders - incl. 10x collets Also available as a production cell (2x Hermle C 30 U + Kuka Automation)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Kjdpexbz A Hefx Ah Nodg Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 800mm/600mm/500mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 87, control: Heidenhain iTNC530, spindle hours: 18706h. 3-axis robot System 3R WorkPal 1 Macro, year of manufacture: 2014, transfer weight: 50kg, stroke: 1450mm, pallet positions: 60. Including Renishaw laser tool breakage detection, Renishaw digital 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Kdjdpfx Aexg Rh Njh Neg

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Kodpfx Ahjtmtxms Nodg Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Kedpfx Aevtmhpeh Nedg Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Kedpfx Aswmm D Nsh Njdg Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Kedpfx Ahovytgfo Nodg Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Condition: used, machine/vehicle number: 2880, x-travel:290 mm Ksdpecxxntsfx Ah Nsdg y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: used, Year of construction: 1995,

Condition: used, Year of construction: 1995,

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in very good condition Hermle C42U Dynamic with following options: Dynamic variant with Ø800 x 630 table Kdsdeya I Diopfx Ah Neg Internal coolant with paperbelt filter Heidenhain Touchprobe Blum Laser

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 18,000 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: Heidenhain iTNC 530, number of slots in tool magazine: 40, number of axes: 5, This 5-axis HERMLE C40U was manufactured in 2009. It's a universal machining centre featuring 5-axis simultaneous machining, a max spindle speed of 18,000 rpm, and a tool magazine capacity of 40 tools. X-axis travel is approximately 850 mm, Y-axis 700 mm, and Z-axis 500 mm. Consider the opportunity to buy this HERMLE C40U universal machining centre. Contact us for more information. • Tool holder: HSK A63 Kodpfx Aheya D D So Nodg

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Control TNC 355C Ksdpfjud Illsx Ah Njdg

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Ksdsuxfz Aopfx Ah Nedg Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples Kjdpfx Ahjv Ed U Dj Nedg About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Year of construction: 2004, condition: excellent (used), used machining center Brand: Hermle Model: U740 Year: 2004 Serial No.: 16716 Weight: 7300kg Power: 26KVA CNC: Heidenhain iTNC 530 Type: 4 + 1 axis (Spirsin model 8117CF/225) 16 tool charger. General technical data: Fast forwards: - X axis: 30m/min. - Y axis: 30m/min. - Z axis: 20m/min. - Axis B: 15 rpm. Tours: - X axis: 915mm / 895 to 915mm (Tool holder head -5º to 90º / Tool holder head > 50º to 95º) - Y axis: 500mm (In all positions of the tool holder head) - Z axis: 500mm / 470mm (Tool holder head 90º-95º) Positioning precision in the 3 axes 0.010mm (Temperature at 20º) Maximum load on table: 700kg Table measures: 900x500mm Spindle rpm: 12,000rpm Hollow Shaft Water Cooled Spindle Motor Milling head with automatic degree rotation from -5º to +95º Kjdpfx Ahjktkdbe Nedg sk 40 tool clamping system 16 tool magazine - Maximum tool diameter: 80mm - In case of adjacent free posts maximum tool diameter 100mm - Maximum tool length: 250mm - Maximum tool weight 6kg Cooling system by coolant with a 210L tank and a flow rate of 30Ltrs./min. It has an electronic control for manual handling of the machine. Chip collector: - Brand: BMF - Model: SPE 63/12-300 Z600 - Year: 2004

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Kodpfxox R S Smj Ah Nsdg Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, For technical data, see images.... Kdodpfx Ahex R S R Nj Njg

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head Kedpfxsx Ry Ate Ah Njdg  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking Ksdpfxjxaam Ue Ah Nedg - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Kdjdpfxok Dz Ngo Ah Njg Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH