Used Heater 11 Kw for sale (48,221)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, Immediately available: new variable screw compressor ALMIG F-DRIVE 22 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2024 Operating hours: 2 Bh Technical specifications Type: F-Drive 22 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.44 / 4.14 m³ / min at 6 bar (g): 0.43 / 4.12 m³ / min at 7 bar (g): 0.42 / 4.11 m³ / min at 8 bar (g): 0.50 / 3.89 m³ / min at 9 bar (g): 0.58 / 3.66 m³ / min at 10 bar (g): 0.67 / 3.47 m³ / min at 11 bar (g): 0.75 / 3.26 m³ / min at 12 bar (g): 0.85 / 3.02 m³ / min at 13 bar (g): 0.94 / 2.79 m³ / min Iedstpw I Hepfx Apcobb Nominal power drive motor: 22 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 1“ G Length: 790 mm Width: 800 mm Height: 1757 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. Ibsdpfx Apoy A Ewtocsb If interested, please contact us – we look forward to helping you find the right solution.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg Ibedpfx Apeg Dvx Nsceb

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Ibedpfx Aeuqk Azspcjb 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Ibodpfevhcnzox Apceb Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Year of construction: 1989, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Ibodpeval Smsfx Apcsb -Manufacturer: Piller, radial fan double -Type: 2 E 10 1800 -Engine power: 11 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 62 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 1150/890/H1280 mm -Weight: 410 kg

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: Isdpfxod Db N Io Apcsbb • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: good (used), Year of construction: 1993, electric motor, three-phase motor Ibodsyhnpujpfx Apceb -Manufacturer: Fimec, electric motor -Type: H132SD2VE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm -Weight: 53 kg/unit

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump Isdpfxozdt Efe Apcjbb -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm -Weight: 169 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: SED 2-11/35B -Max. Power: 11 kW Isdpfx Apsb A S Tpjcebb -Input: 380-480V +/-10% 3ØAC 26.0A 0-150 Hz -Output: 0-Input V 3Ø 26.0 A 0-150 Hz -Dimensions: 640/450/H350 mm -Weight: 24 kg

Year of construction: 2021, operating hours: 0 h, condition: new, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) include dryer Ibjdpeg N Ti Tofx Apcjb include Ecodrain include 2 Filters include 270 liter tank galvanized Year 2021 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT 11 XP 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.49 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 67 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 458 kg Compressed air connection: G 3/4 "

Condition: good (used), Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 Ijdpfx Ajh Db E Ujpcjbb -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Condition: excellent (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 11 kW -Density: 1.2 kg/m³ -Volume output: 84 m³/min Ibedpfxjb Uhp Rj Apcob -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° Iodpfx Ashfufgjpcsbb -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill -Power: 3 - 11 kW -Speed: 220 - 3200 rpm Ibjdjg D H Dcepfx Apcjb -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011) Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically. Isdpjzvyaajfx Apcsbb

Condition: used, Two Ystral inline mixers are for sale. Ijdpfx Aoga D I Uopcjbb Mixer data: RPM: 1465 V: 230 / 400 kW: 11 Shaft length: 560 mm Overall length: 1220 mm Impeller diameter: 360 mm For more information, see the data sheet.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, gear pump, double hydraulic pump -Manufacturer: Orsta, Double hydraulic pump -Pump 1: Type A 16 R -Pump 2: Type C16-3R -Motor: VEM 11 kW / 1440 rpm -Number: 2x hydraulic power units available -Price: per piece -Dimensions: 840/270/H335 mm Iodjibd Sxepfx Apcjbb -Weight: 107 kg/unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08C35020538, power: 22 kW (29.91 HP), overall weight: 21 kg, total width: 540 mm, total length: 350 mm, total height: 590 mm, - Universally applicable Ibedpfx Apoulvnrscob - Easy to transport - For spot heating of workplaces or for quickly heating small to medium-sized rooms Further information can be found in the data sheet.

Condition: good (used), Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm Iedpfx Apsc I Ixbocebb -Weight: 178 kg

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Ibsdpfx Apjzav Ebscjb

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 170 mm, number of blades: 13, total length: 1,476 mm, total height: 1,886 mm, total width: 1,009 mm, rotor length: 400 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 12 mm, warranty duration: 12 months, We are a company with over 30 years of experience in the trade of machines for the plastics processing industry. All machines offered are available at our premises and can be tested on your material. The GCV series machine is a modern device that combines the functions of initial shredding and final granulation of plastics. This allows various types of plastics, and more, to be processed in a single operation. The upper section of the machine is responsible for pre-shredding: material is fed onto rotating knives which precisely cut it. An additional special feeding system ensures the efficient introduction of material into the machine. The lower section is the grinding zone, where the rotor construction and the method of material feeding can be adjusted depending on the type of material, its properties, and the desired throughput and final regrind size. Importantly, after processing, the material does not require any additional transfer between devices. The machine has a compact design, requires little space, and offers an excellent price-to-performance ratio. Shredder specifications: Shredder motor power: 11 kW Ibjdpfx Apjyanf Hjcob Rotor knives: 13 + 2 Fixed knives: 4 Granulator specifications: Granulator motor power: 7.5 kW Rotor knives: 6 Fixed knives: 2 Weight: 1,110 kg Cutting chamber dimensions: 400 × 550 mm If you are interested in GENOX machines from the UK, Germany, Portugal, Hungary, Spain, Russia, France, or Turkey, please contact the local Genox dealer in these countries. If you are from another country, please contact us, and we will assist you in selecting a machine and conducting tests in Poland.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Power: 0.8/11/11 kW 60/818/4500 rpm -Speed: 60/818/4500 rpm -Shaft: Ø 48 mm -Number: 2x motors available -Price: per piece -Dimensions: 330/330/H875 mm -Weight: 230 kg Iodpsdx Aivofx Apcsbb

Condition: good (used), Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5163-4AA21 -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B5 -Protection class: IP 54 Ibsdst Nawxspfx Apcob -Dimensions: 630/350/H405mm -Weight: 80 kg

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, overall weight: 43,000 kg, warranty duration: 6 months, pressure: 280 bar, oil tank capacity: 2,450 l, power: 110 kW (149.56 HP), year of last overhaul: 2026, This Impress D130-A-110 kW press is in new condition and has been completely refurbished. The press has been completely rebuilt, with almost all parts replaced by new components. Only the frame and some mechanical parts are still part of the original assembly. The main cylinder has been completely overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control panel is also completely new, ensuring maximum reliability, safety, and operational certainty. Ijdjy Tm H Ropfx Apcsbb The standard configuration of this machine features horizontal strapping. Thanks to the prepared frame, this press can also be supplied with both horizontal and vertical strapping, making the machine flexible for use with various material flows. Applications: Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. As you have come to expect from BOA, this used machine can also be supplied with technical support, parts supply, and expert advice.