Pressure blower 11 kW

Aretbw VRVP 500-5N-L135°

Condition: excellent (used), functionality: fully functional, power: 88 kW (119.65 HP), fuel tank capacity: 399 l, color: green, overall weight: 32,700 kg, Year of construction: 2019, operating hours: 2,351 h, Screen drive speed: 1130 to 950 rpm Transport dimensions: 15,300 x 2,900 x 3,400 mm (LxWxH) Screening area lower deck: 4,575 x 1,525 mm Screen box adjustment: 16° to 20° Bodpfevzahljx Ab Tedk Design: two-deck screening system Screening area upper deck: 4,880 x 1,525 mm Diesel tank capacity: 399 liters Engine manufacturer / type / power: Cat / C4.4 / 88 kW Belt width / medium grain / fine grain belt: 900 mm Feeder belt width: 1,400 mm Weight: 32,700 kg Hydraulic oil capacity: 630 liters

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica Bsdpfxsp T Twuo Ab Tsdk barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Year of construction: 2003, condition: used, Bollegraf Hammermühle AS 75/850 mit Z- Förderband year: 2003 power: application: feed opening: rotor- Ø: rotorb width: 850 mm price: 34.000 Euro Bdodsg T Id Nopfx Ab Tok contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2024, Consisting of a bale shredder for large bales, type MHB and a straw shredder, type MHZ 1) Bale shredder MHB: Special price starting at €29,975 net (production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (VFD) - this controls the speed of the scraper floor. The bales are placed on the scraper floor and the cutter's feed is activated. The cutter's tines tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale shredder and straw shredder is recommended. Technical specifications for bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill and the power of the straw mill. Without the straw mill, the bale shredder can shred straw up to a maximum of 900 kg per hour) Maximum square bale size: 2400x1200x800 mm (LxWxH) Rotary cutter motor: 5.5 kW, 380 volts Scraper floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (LxWxH) Weight: 400 kg Bsdpfx Asb Nulhsb Tjdk 2) Straw shredder MHZ 600 - 11/15 kW; Available immediately Special price from €7,995 net Special hopper: + €970 (only in conjunction with bale shredder) Surcharge for the even larger straw shredder (18.5 kW) + €3,940 net Technical specifications, MHZ with special hopper: Motor: 15 kW 380 volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with replaceable inserts Optional (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, Ue protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing width: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options For an additional charge: Intake auger + €970 net Cyclone (mounted by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter €1,750 net --- Further options: Industrial extraction system (demonstration) + from €9,950 net Optional with rotary valve *depresses the material + €5,750 net Control system: from €1,620 net Special shredder extension 3 m *other dimensions must be calculated + €9,750 net Briquetting press MPP 180 S; Little-used demonstrator 70 mm briquettes - up to a maximum of 100 kg/h from €39,700 net * larger machines available upon request --- Description: The muetek bale shredder was developed for shredding round and square bales of hay and straw. The shredder flanged to the bale shredder shreds straw from all types of grain, hay, corn, and miscanthus. The muetek machines of the MHZ/MHB series are characterized by their robust design and solid construction. muetek bale shredders of the MHB series are equipped with a chain conveyor onto which the straw bale is placed using the front loader. The support is adjustable depending on the bale type. The chain conveyor presses the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The straw separated from the bale is ejected. --- The machines generally work for dry raw materials: - Straw - Hay --- Hemp shredding only works with a special shredder. Surcharge: approx. €9,720 net * depending on the model. Hemp shredding does not work with the straw mill. Requirements for the raw material: Maximum moisture content 12%

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG Bdsdpst Nhqyofx Ab Tjk FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Year of construction: 2002, condition: ready for operation (used), There are two identical vertical bag filling machines available, weight: 1.1t. Bodpfx Abonfvxzo Tedk

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Bsdpfoi Igdfsx Ab Tjdk Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW Bdsdpfjhd I S Aex Ab Tok - 4 aggregate hopper of 25 m³ - capacity: 50 m³/h - mixer size: 1,0 m³ / 1500 liter - K2 portable computer system - screw conveyor for cement - cement silo 55 to. - international assembly included - 2 years guarantee This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Application: Building industry, Material used: Concrete,

Condition: excellent (used), functionality: fully functional, power: 56 kW (76.14 HP), fuel type: diesel, operation weight: 18,000 kg, Year of construction: 2021, operating hours: 350 h, Feed hopper volume: 5 m³ Bsdjrh E Evjpfx Ab Tjdk Operating position dimensions: 11,444 x 10,576 mm (LxW) Engine type / power: Catertpillar 4.4 / 56 kW Screen box: 3,660 x 1,280 mm (LxW) Weight: 18,000 kg Throughput: approx. 400 t/h

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Bedpfot S Sxgox Ab Tsdk Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor