Used Heat Treatment for sale (14,091)

Year of construction: 1998, condition: as good as new (ex-display), Wire chemical treatment cleaning unit FULLY refurbished with ALL brand new parts except chassis. Godpfofhw Uyjx Af Uobi Please contact us for more details. Thank you!

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control system. Gjdpfx Afoyivr Ts Usbi

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Gsdpsulwg Nefx Af Uebi Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Weight: Estimated: Kg 690.0 Gbedpfx Afoyh I Uns Uoi

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Gbodpfx Afoyh I Uhj Uei Weight: Actual: Kg550.0 Dimensions: 650 X 3000

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE Godpfx Asyh Ebrjf Usbi -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Condition: used, Year of construction: 2011, operating hours: 32,500 h, functionality: fully functional, power: 140 kW (190.35 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 3,500 kg, temperature: 25 °C, We are offering this used MAN E2876 combined heat and power unit, year of manufacture 2011. Year: 2011 Model: E2876 E312 Engine number: 298 3025 272 3007 Serial number: 3007 Factory number: 5019615 Job number: Power output: 150 kW Speed: 1,500 rpm Temperature: 25 °C Installation altitude: 100 m Gjdsylmbqopfx Af Uobi If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Gbsdpfx Afsw Hxgvo Usi Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: used, Professional, automatic sandwich packaging sealer capable of sealing a wide range of film or cardboard lids onto plastic, cardboard, or film containers. Manufacturer: MPE UK Ltd Model: SL 1200 Output: max. 48 packs/min. Gsdpfxox H S T Ao Af Ujbi Used machine.

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Godpfxjyk Sgcs Af Uobi

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Gbsdpfx Afsyk Eg Ns Uji Folder Capable of folding up to A5 size Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m Gbedpfx Afeykvdlo Uei - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Condition: new, Automatic Wood Chip and Wood Shavings Fired Boiler System Gedeykqwmepfx Af Uebi Technical Data: Type: T4 – 150 Output: 150 kW Width: 790 mm Height: 1840 mm Length: 1770 mm Weight: 1500 kg Water capacity: 340 l Maximum permissible operating temperature: 90°C Maximum permissible operating pressure: 3 bar Electrical connection / Power supply: 400 V / 50 Hz / C16A

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering this used MAWERA FU 1300 RA heating system, year of manufacture 1986. Includes control cabinet, flue gas cleaning, and induced draft fan. Model: FU 1300 RA Year: 1986 Nominal heat output: 1,500 kW Permissible operating overpressure: 6 bar Gsdpfxsykmd Ae Af Usbi Permissible flow temperature: 120°C Price: €5,000 We are also offering a used MAWERA FU 550 RIA heating system, year of manufacture 2001. Model: FU 550 RIA Year: 2001 Nominal heat output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Price: €4,500 In addition, the shared push floor discharge system with twin auger and hydraulic power unit, as well as an Eder pressure maintenance and degassing system, are available for sale. Dimensions of the system can be found in the pictures. Prices apply to the boilers only. The system is still in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. Dismantling by the seller is possible; dismantling costs will be charged separately. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW Gbsdpfx Afjygx Tzs Uei - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, Year of construction: 1995, operating hours: 20,000 h, functionality: fully functional, power: 410 kW (557.44 HP), smoke pipe connection diameter: 320 mm, For sale: Spänex heating system including discharge unit. The silo discharge is from Pöllhuber. The silo diameter is 8 m. The heating room height is 3 m. Available from mid-year by arrangement. Gsdpfxsykky Ie Af Usbi

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Godeupy S Njpfx Af Uobi

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also possible. komplett-konzept.leasingo.de Gbodpfxoidx Uio Af Uji You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Year of construction: 2026, condition: new, Diesel/gas pasteurizer 500 heats up the liquid before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 400-600 L of 80 ºC (176 °F) heated juice. Gsdpsflrk Iefx Af Uebi - The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. - The maximum heating temperature of diesel pasteurizer is 90 ºC (194 °F). - Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. - The heating power is 53 kW. - Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. - Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. - Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. - The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. - Machine can use diesel or gas on client’s request. - The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. - Diesel/gas pasteurizer has pivoting wheels. - Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Year of construction: 2026, condition: new, Diesel/gas pasteurizer pasteurizes various liquids before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. Godpfx Afeflq Sgo Usbi One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 900-1250 L of 80 ºC (176 °F) heated juice. The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. The maximum heating temperature of pasteurizer is 90 ºC (194 °F). Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. The heating power is 110 kW. Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. Machine can use diesel or gas on client’s request. Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. Godek S Dt Tepfx Af Uebi - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press – versatile use as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press, designed as a double-column press (H-frame construction). Inspection of the press is possible at the warehouse in Ennepetal. This is a 2.5-year-old, unused press with zero operating hours, being sold with full warranty. Technical details: - Robust machine frame - Capacity: 30 tons at 300 bar - Pump ASC: 28.5 liters/min. - Motor: 11 kW – 15 hp - Oil tank: 600 × 450 × 500 mm – approx. 100 liters - Cylinder piston: Ø 110 mm - Cylinder bore: Ø 70 mm - Stroke: 500 mm - Speed, forward: 45 mm/s - Return: 55 mm/s - Guide rods: Ø 50 mm - Table plate: 800 × 550 mm – with T-slots - Ram plate: 700 × 500 mm – with T-slots - Total weight: 2,000 kg - BoschRexroth valves - Control cabinet technology from renowned manufacturers - Press table size: 700 × 500 × 70 mm - Table height: 800 mm, measured from shop floor - Cylinder dimensions / piston rod: 110 / 75 mm - Ram size: 700 × 500 × 80 mm - Emergency stop switch - Rear protective enclosure made from painted mesh - Press area lighting - Rear and sides fully enclosed - 500 mm high light curtain with 14 mm resolution (finger protection) - Maximum distance between table and ram: 500 mm - Cylinder travel: 500 mm - Front open width: 820 mm - Pressing force adjustable by rotary knob from 5 to 30 T Godpou U Ey Iefx Af Uobi - Travel speed: downwards 50 mm/sec, upwards 40 mm/sec - Total weight approx. 2,000 kg - Finish in RAL 7035 (light grey) and RAL 2009 (orange) - Assembly, commissioning, and operator training available for an additional charge - CE declaration and German-language documentation - Ram plate guided by two pillars - Resettable piece counter - Position limit via cam switch - Adjustable two-hand control with 3 m cable - Safety inspection with certificate from an authorized specialist company - The right side features movable sensors for stroke limitation. This allows a specific stroke, e.g., 300 mm, to be set. The press will then automatically move to the preset point at the push of a button. - The ram plate is guided by two columns. - The rear of the press is enclosed, but fitted with air outlets. - The table features an ejection chute. - Light barrier with anti-reach-under protection. - Mountable anti-reach-over guard. - Optional: 2 heating plates, 500 × 500 mm heating surface each, total size 550 × 550 mm, with controller, up to 200°C, incl. 20 mm thick insulated plate, with timer - Optional: Installation and training Delivery times: Currently, a lead time of approximately 6 weeks is to be expected (without heating plates). Heating plates delivery time approx. 8 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Gsdsyizqnopfx Af Usbi Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Year of construction: 2018, condition: used, functionality: fully functional, We offer this used Wolf WK-com N-W B127 Air Handling Unit with heat recovery (HRV) and Panasonic cooling, year of manufacture 2018. Nominal air volume flow (20 °C): 7,500 m³/h Nominal air volume flow (20 °C): 2.08 m³/s Total pressure difference (tot. Δp stat.): 721 Pa External pressure difference (ext. Δp stat.): 400 Pa System efficiency η: 67.0 % Fan speed at operating point nᵥ: 1,357 rpm Maximum fan speed nᵥ max: 1,550 rpm Current consumption at operating point Iᵦ: 3.4 A Nozzle differential pressure Δp Dü: 593 Pa Calibration factor k: 308 Motor rated power Pₙ: 3.4 kW Motor rated current Iₙ: 5.4 - 4.2 A Rated voltage Uₙ: 3~380..480/50 V/Hz Control voltage at operational point: 8.8 VDC Gbodpfxjyir Nzo Af Usi If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Gbjdpoyfwpxofx Af Uji