Used Heat Band for sale (18,578)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Bcsdpfx Aajvvkd Tofsu Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bcedpfxsvvkfdj Aafeu

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Bedpfx Asvvkfqoafjcu Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Bcjdpfxovvkfwj Aafju Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Bjdpoxyiilsfx Aafjcu

Condition: used, Year of construction: 1968, max. blade length: 5600 mm; roller diameter: 800 mm; max. cutting height: 520 mm; max. cutting width: 770 mm; tiltable table: yes; stand side: left; stop ruler: yes; saw blade guide: roller guide; design: stationary; weight approx.: 800 kg; motor: 3.0 kW. Storage location: Nattheim. Bcjdevvkmuopfx Aafeu

Condition: used, Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 770 kg Storage location: Nattheim Bcedpfx Aaswayzbefsu

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Bcodpfx Aaovvkg Iofeu

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Bodpfxswl D S Ue Aafecu

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Bcodpfxoxpymae Aafou Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 2012, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm 430 mm 410 mm 700 x 410 mm 410 mm cutting speed 500 x 410 mm down speed 320 mm dimensions of saw-band 320 x 410 mm workpiece weight 15 - 150 m/min 5,5 kW work height max. 3200 kg connected load 4500 x 2800 x 2000 mm Equipment: - Automatic cutting pressure and feed rate monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA gripper infeed system from 5-2300 mm per stroke with integrated roller conveyor roller conveyor *Special equipment: - Laser light for cutting line display/ scribing saws - Driven chip brush - Micro dosing system - Clamping pressure regulation Bcedpfx Aoyb S Emeafou - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2000 mm length - Cutting process control

Condition: good (used), Year of construction: 1994, functionality: fully functional, Table tiltable via handwheel, lower and upper roller guide, brake motor 400 Volt, 3 kW. Transport available at an additional cost! Bedpfeybllyox Aafocu

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Bodjxwhw Aepfx Aafocu Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 160 / 2018, overall weight: 4,600 kg, positioning accuracy: 0.01 mm, table width: 500 mm, air demand: 1 m³/h, compressed air connection: 6 bar, warranty duration: 12 months, working height: 150 mm, saw band length: 6,170 mm, saw band width: 90 mm, wheel diameter: 1,000 mm, wheel width: 80 mm, Generallly refurbished from 330 mm version to 500 mm in 2026: - complete new conveyor system with chromatic table - complete new driven infeed top pressure system - new electrical cables on the machine, new pneumatic and oil lines. - new crowning on main wheels - new main shafts & bearings - all linear guides are new Heavy-duty horizontal Thin Cutting Band Saw for all your re-sawing applications, including flooring, windows, doors, furniture and musical instruments. Put these advantages to work in your operation: - Steel Table at the cutting spot for the highest precision - High precision lamellas with gluable surface in tolerance ± 0.15 mm, depending on lamellas width - Divided Feed Conveyor with Top Driven Infeed Pressure Unit - Bearings on both sides of the Main Wheel Shafts for maximum cutting stability - Saw Monitoring during machine operation - Heavy-duty, cast-iron construction-built for longevity and superior tolerances - CNC touch-screen control panel for easy height adjustment - Thin-kerf, high-tension blades to minimize your waste Bcedextmqmjpfx Aafeu - Handles material up to 500 mm wide, 150 mm thick - Adjustable cutting speed and feed speed as well - Produces smooth, gluable surface - Variable feed up to 16 m/min. - Cutting speed up to 50 m/s

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Bjdpfxjw Aig Sj Aafecu

Condition: used, - Saw band motor 5.5 kW Bsdpfsydux Iox Aafjcu - Cutting range 400 mm - Saw band dimensions 4570 x 41 x 1.3 - Feed length 570 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min Bcodpjwb Ha Tsfx Aafeu – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, complete for sale or in sections: CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat material Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Lifter Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with Activation Section Bcjdpfx Aajtwn Ipofju Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the washing machine

Condition: good (used), Year of construction: 1980, functionality: fully functional, Technical data: Bedpfxjydpamj Aafecu Large support table 800 x 820 mm, Table travel approx. 350 mm, Cutting height under guide approx. 400 mm Speed continuously variable approx. 15 – 944 m/min. .

Condition: excellent (used), Vertical bandsaw in technically excellent condition, featuring a robust construction and high cutting capacity. Ideal for precise cuts even on larger workpieces. Technical data: • Flywheel diameter: 600 mm • Flywheel speed: 820 rpm • Motor power: 3 HP / 2.2 kW • Cutting height: 370 mm • Cutting width: 580 mm • Table size: 600 × 875 mm • Blade length: 4,520–4,600 mm (blade width 35 mm) • Extraction port: 2× Ø120 mm • Machine dimensions (L×W×H): 1000×790×2000 mm • Weight: 280 kg Condition: – Technically tested and fully operational – Ready for immediate use – Operating video available upon request – Inspection possible at any time Shipping available! Bsdpfx Aexxxt Rjafocu

Condition: good (used), Year of construction: 1981, roll diameter 315 mm throat 295 mm workpiece height 190 mm Bcedpeyatycsfx Aafeu Motor Capacity 0,37/0,8 kW table-size 470 x 450 mm saw band length 2220 mm cutting speeds 450 + 900 m/min weight of the machine ca. 110 kg dimensions of the machine ca. 640 x 510 x 1600 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding machine HolzHer 1321, in very good working condition, regularly in use, edgebanding programs available, robust industrial machine - Pre-milling unit/jointing with spare DIA cutter - Glue application unit, upgraded a few years ago to continuous slot nozzle, pressure section - Glue height and edge thickness fully controllable via display, compatible with cartridge or granulate, PU glue possible - Panel preheating Bedpoxiv Efofx Aafscu - Separate top and bottom pre-milling units - Motorized rounding unit, adjustable for 2 mm radius - Straight/angled end trimming - Radius scraper - Corner copying unit - Flat scraper - Buffing unit Offered in ready-to-use condition. Still regularly in use until approx. week 42/43, testing is welcome.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Bcedpfew Ni Nrsx Aafeu Automatic infeed fence Jointing/edge trimming End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Corner rounding Radius scraper blade Schwabbl cleaning unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: used, Stable bandsaw Pehaka for cutting wood and other materials. Roll diameter: 800 mm engine: 3 kW clearance height: max. about 350 mm Bcjdoyarwmspfx Aafeu

Condition: excellent (used), CATALOGUE NUMBER 7603 TECHNICAL SPECIFICATIONS - automatic sharpening speed - tooth counter - suitable for wide band - grinding wheel size: 240 mm - motor power: 0.12 kW, 0.75 kW, 400 V - dimensions (L/W/H): 3600x1600x1500 mm - weight: 140 kg ADVANTAGES – made in Poland – with tooth counter – for wide band Bcsdpfeyarciox Aafeu – unpainted – used sharpening machine – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)