Used Heat Band for sale (16,387)

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Dcjdpfjy Id Nlsx Akcog Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Dcedjxy Tm Ispfx Akceg

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Dedpfx Ajw D Aybjkcscg

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Dsdsw D Aw Hspfx Akcecg Location: Nattheim

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € Doppelsäulenführung 6300 x 41 x 1,3 mm 15 - 120 m/min 440 mm 440 mm 640 x 440 mm rund 440 mm, rechteck 400 rund 250 mm, rechteck 250 rund 390 mm, rechteck 390 860 mm 1.1 kW 4 kW 0.12 kW 3150 mm 1850 mm 2115 mm 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment Djdpjwirzlsfx Akcjcg pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control

Condition: excellent (used), Band Saw - Horizontal Manufacturer: Mep Model: Shark 281 * Manual cutting cycle Djdjy Ntt Aspfx Akcocg * Automatic cutting cycle * Cutting diameter: 250 mm * Saw band length: 2950x27x0.9 mm * Band speed: 36/72 m/min * Mitre adjustment: 0°, 45°, 60° right/left * Coolant system * Total power requirement: 1.8 kW * Machine weight: approx. 400 kg

Condition: used, Year of construction: 2006, Gilles wood chip heating system, output 145 kW, year 2006, incl. feed auger with back-burn protection, incl. fuel transport auger, incl. control unit, good condition. Dismantling must be carried out by the buyer. The system is at ground level and can be rolled out in one piece. Forklift available! Dsdpjvgcwmofx Akcscg Not included: - Bunker discharge - Chimney

Condition: used, Year of construction: 2013, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 680 mm, total length: 2,560 mm, power: 37 kW (50.31 HP), motor manufacturer: SEW Eurodrive, Belt Conveyor / Conveyor Belt / Belt Band Color: Light Grey Year of Manufacture: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total Length: approx. 2560 mm Overall Width incl. motor: approx. 680 mm Overall Width without motor: approx. 620 mm Belt Width: approx. 590 mm Belt Type: Longitudinal Grooves Frame Material: Aluminium Frame Height: approx. 70 mm Including SEW Motor (0.37 kW) In Stock: 6 units Price per unit Collection Address: Industriestraße 5 (47918 Tönisvorst) Dcjdpfoyxf Nhsx Akceg Internal Article Number: 2026032602 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of this conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a bespoke quotation or advise you on design or installation matters. Just let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting systems or supplementary components such as order picking racks or containers.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit Dcjdpfxsy Nkqxe Akcog The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Djdjxm S E Aspfx Akcecg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 20 h, Equipment: adjustable boom, adjustable chassis, air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS AVAILABLE! HT25 PRO Mini Excavator with 2.5 t operating weight, equipped for professional applications in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade equipment ➡️ Technically fully operational, ready for immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Cosmetic defects, storage marks, or transport damage possible The machine features a robust specification and is designed for demanding tasks. Standard steel tracks ensure high stability, excellent traction, and long service life, even in tough operating conditions. Get in, start, and work – this excavator is ready to operate immediately and works flawlessly. EQUIPMENT & BENEFITS: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Hydraulic flow rate: 61.6 l/min • Hydraulic pressure up to 25 MPa • Side-swing boom • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm Dodpfex Hhu Nsx Akcjcg • Travel speed: approx. 2–4 km/h • Climbing ability: approx. 30° Price €15,000 net plus VAT Sales Notice: Sold as B-grade / special clearance item. The machine is fully functional, immediately operational, and is sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Cosmetic defects, storage, or transport damage may be present. Operating hours up to 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery throughout Germany and Europe available at extra cost 🔧 Inspection available by appointment Only 2 machines left – while stocks last. Contact us now to secure the special price and start working immediately.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Get in & start working! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with high performance, premium build quality, and maximum operator comfort – perfect for construction, landscaping, and municipal applications. Thanks to its compact design and state-of-the-art load-sensing hydraulics, this machine is ideal for confined jobsites and powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-season professional machine! ⭐ Your advantages at a glance ✅ Swing boom – ideal for work in tight spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-efficient control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ⚙️ TECHNICAL DATA Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat for long operating hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The scope of delivery includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any jobsite out of the box! ➕ OPTIONAL EXTRAS AVAILABLE Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from our warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Djdpfxox Hg D Ao Akcscg Europe-wide delivery organized on request Location: Rheda-Wiedenbrück Our machines are available immediately and ready for operation. We invite you to inspect and test any of our machines on site. SPECIAL PRICE €17,500 net (RRP) Special offer available – contact us! Request more information now & secure your advantage! Demand is high – secure your LT-20 PRO today. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 165 x 210 mm 195 mm 185 x 185 mm 130 x 190 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 85 x 85 mm capacity 60 degrees: flat 85 x 120 mm 170 mm 145 x 145 mm 60 x 195 mm cutting speed 36 + 72 m/min dimensions of saw-band 2725 x 27 x 0,9 mm 315 mm Dcodpfxsy H N Nno Akcsg work height max. 900 mm Motor output 1,2 kW Weight 330 kg

Condition: new, Year of construction: 2026, neu Dedpfxswirkto Akcecg 2026 060215 Juni 2026, Zwischenverkau Türkei 9280 € 179.1 € Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2026, neu Djdpfx Akewiqtyocjcg 2026 060216 Juni 2026, Zwischenverkau Türkei 20700 € 397.44 € Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4384059, power: 6.5 kW (8.84 HP), overall weight: 30 kg, input voltage: 400 V, For sale used Weishaupt burner electric motor D132/120-2A Nr. 4384059 6.5kW 380-400V 13,5A 2900rpm Dcjdey Nh Uuspfx Akcjg

Condition: used, Year of construction: 2008, machine/vehicle number: 972, temperature: 600 °C, inner dimension length: 2,500 mm, inner dimension width: 2,500 mm, inner dimension height: 3,500 mm, overall weight: 20,000 kg, number of chambers: 2, fuel type: gas, Part 1: WQ-98.98.138/35E Shipping weight: 20,000 kg Furnace Data Max. temperature: 600 °C Temperature uniformity: Continuous process: ±5 °C Maturation process: ±3 °C Usable chamber dimensions Width: 2500 mm Length: 2500 mm Height: 3500 mm Load capacity Max. permissible load (gross): 2200 kg Performance data Heating power (gas): 1000 kW Dodey H I Szepfx Akcjcg Installed power: 48 kW Technical data Supply voltage: 3 × 400 V / 50 Hz External dimensions Length: 4443 mm Width: 8395 mm Height: 7355 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 6034 104 018, functionality: fully functional, Kasto fully automatic band saw machine HBA 660 AU/A6 Specification Serial number: 6034104 018 Dcodpoy H Ihpofx Akceg Capacity: ø660 mm Square capacity: 660 x 660 mm Single cut: 20 mm Feed length: 500 mm Saw blade: 8585 x 1.6 x 67 mm Saw motor: 7.5 kW Total motor power: 17 kW/50 A Year of manufacture: 2000 Length: 2400 mm Width: 4100 mm Height: 2520/2800 mm Weight: 5600 kg Information Driven roller table, 3° table inclination optimises sawing of flat and square material. Different quantities and lengths in the same program. Including roller conveyors and saw blades.

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm Dsdpfxoy H D Raj Akcecg • CNC stop travel 7200 mm • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Stenner ST 100 R Resaw Year 2017 Good condition Dedpsy H Ddgofx Akcscg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Morbidelli P 200 Year 2019 ca 4 500 working hours 100% fully working condition , nice and clean machine. Still standing on it original please since first installation in 2019 here in Norway. Operated only by one operator since new in 2019. Dcodpfxswuubfo Akceg For all technical specification please read - clic on including pdf document. (at the end of this adversating, click download this document) Machine can be seen after an appointment . The machine will be disconnected in Mai 2026. You are very welcome. Rekman Maskin & Service - Service of cnc machines since 1986 -

Condition: used, Year of construction: 2007, machine/vehicle number: 0003000421, functionality: unexamined, AUTOMATIC BAND SAW Dcodpfx Aey Ndnwjkceg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm Dedpfxswg E Hvj Akcscg L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 6459103239, functionality: fully functional, operating hours: 2,200 h, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 1,700 kg, The KASTOtwin A2 is a fully hydraulic production band saw machine, designed for reliable and continuous operation. This machine is suitable for cutting both solid materials and tubes or profiles, ranging from easy to hard-to-machine materials. Thanks to its modern linear guides and robust construction, the KASTOtwin A2 is renowned for its high stability and long service life, even under demanding conditions. A key distinguishing feature of this machine is the double-bearing drive wheel. This provides optimal support, reduced wear, and consistently high cutting quality — exactly where KASTO stands out. The machine comes equipped as standard with a Compact Control system, allowing sawing jobs to be programmed with ease. Multiple lengths and quantities can be preset, after which the machine operates fully automatically and stops once the preset quantity is reached. Dcedpoy Ndmgefx Akceg With a cutting capacity of up to approximately 260 x 260 mm, infinitely variable blade speed, and hydraulic clamping force adjustment, the KASTOtwin A2 is suitable for both single pieces and series production. The combination of a frequency-controlled drive, blade breakage protection, and the well-known KASTO universal hydraulic system ensures a stable cutting process, long blade life, and minimal maintenance costs.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 2,300 kW (3,127.13 HP), For sale used gas burner Cib Unigas P73A 320-2300kW Dedpey Nbtqofx Akcjcg