Used Hacker Knife Suppliers for sale (2,016)

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor also a paper filter was retrofitted for filtering the cooling water Rbodpfemccvaox Ahvjw

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc. Rbodpfxoki Tqce Ahvew

Condition: ready for operation (used), Bolt on knife unit To suit a Stahl T50/52 folder- Price £3,000   IN STOCK Rbedpfxsq U Trhj Ahvow

Condition: ready for operation (used), IN STOCK stack lift 650 kg Rbsdpfxoir A Iqs Ahvjw

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Rjdeir A E Ijpfx Ahvobw

Condition: ready for operation (used), To suit a MBO T500, Price £3,000     IN STOCK Rsdpfxoir E R Ro Ahvjbw

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Price includes loading of the equipment Rsdpfxew Dqngj Ahvjbw Transport and installation possible at extra cost.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality Redpfegq N Ezox Ahvebw

Condition: ready for operation (used), MM 890 trimmer 2 up attachment, castings only ! Redpfx Aoir A E Dehvobw

Condition: ready for operation (used), IN STOCK - Rbodoir E R Aspfx Ahvow 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Redpfx Aoyxkncjhvebw Please contact Tobias Ebert for more details.

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Rbjdoyr Tkfopfx Ahvjw Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2025, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. Rbedpfxexqgm Nj Ahvow - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), axle configuration: 8x8, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, EBS, air conditioning, = Additional options and equipment = - Brake system = Notes = For vehicle inquiries, Mr. Seidel will be happy to assist you (Tel. ...). Mercedes-Benz Arocs TUROX Eschlböck Biber 92 Body: Eschlböck Biber 92 Crane: Epsilon S110F104 Axle configuration: 8x8-4 Chipper operating hours: only 1,512h! Many pictures and videos available On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be glad to assist you. You will find more information on our website. ... Subject to errors, changes, and prior sale!!! • Particulate filter • Cab: Short-haul = Further information = Rbjdpeyfpx Esfx Ahvsw Engine displacement: 15,569 cc Gross vehicle weight: 36,000 kg External dimensions: 0x2550x4000 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Rbjdpfxevvi Ano Ahvew

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Rbodjytrmzspfx Ahvsw Storage location: Supplier

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards. Rbsdjycfw Eopfx Ahvsw

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start Rbodpodv Eu Hofx Ahvsw - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 0901 0009, cutting height (max.): 10 mm, nominal flow rate: 3,000 m³/h, table length: 1,900 mm, table width: 1,450 mm, TECHNICAL DETAILS Working area: 1,900 x 1,450 mm Cutting thickness: 10 mm MACHINE DETAILS Knife system: Oscillating drag knife and ultrasonic knife Rodpoyu Ry Nefx Ahvjbw Airflow rate: 50 m³/min Electrical data Voltage: 400 V, 50/60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 kVA Main fuse: 16 A Control voltage: 24 V DC EQUIPMENT Vacuum unit conversion to Rovicore RTM vacuum table with distribution channel

Condition: new, Working width 530 mm Length of the planing table 3.000 mm Number of knives 4-TERSA St. Rbodoxmk A Hspfx Ahvjw Motor output 4 kW FIMAL surface planer type PF 530 N ----- NEW MACHINE "Partnership Edition" Technical specifications: ----- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 50 Hz., 4 kW / 5,5 PS Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop ----- Special offer from stock: ----- All prices plus VAT / plus Freight and assembly according to expenditure (Technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), Combined surface-planer and thicknesser 610 mm Rjdpfx Ahoqnurtjvjbw Cutterblock with wedge knives Wedge knife cutterblock, 2 knives, jointing fence Auxiliary fence, motor on rocker mount Size 1800 x 1100 x 950 mm Weight approx. 900 kg

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the Rbedjyx Duvjpfx Ahvsw the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Rbodpfx Ahoydcuqsvsw Equipment / Additional information: Side tables, air table, 1x reserve knife

Condition: used, Cutting length 5300 mm, cutting height 2200 mm, motor 5.5 kW, cutting depth 80 mm, free-standing. Storage location: supplier Rjdpfxoynbm Ho Ahvsbw

Condition: excellent (used), ZVE152724 Swivel Motor Spindle 24000 HSK-T40 Milling spindle for HT45PM Supplier: Siemens Weiss Technical data: Speed: 24,000 rpm Torque: 21.5 Nm (S1) Power: 11 kW (S1) Interface: HSK-T40 Clamping torque: 300 Nm Lubrication: Grease; lifetime lubricated Drawing no.: 180020 Rbsdpfxexxamfj Ahvsw