Used Hacker Knife Suppliers for sale (2,279)

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Dwedpfx Absf Iyb Nj Tef Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, shoulder milling cutter -Cutter head: face milling cutter cutter head corner milling cutter -Type: Ø 100 mm -Hole: Ø 40 mm Dwsdpewld Rksfx Ab Tof -Number: 4x milling head available -Price: per piece -Dimensions: Ø 100 x 50 mm -Weight: 1.3 kg/piece

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Djdpfjwu Sptjx Ab Tewf Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor Dwedpfx Absmccvas Tsf also a paper filter was retrofitted for filtering the cooling water

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Dwedpfow Dqngsx Ab Tjf Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Price includes loading of the equipment Transport and installation possible at extra cost.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Technical data: Hopper opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Dwsdjvymdwspfx Ab Tef Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible knives concave / 30 x 30 mm, scraper knives Screen perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Included: Control cabinet (Rittal) incl. 5 m cable Electrical control system (Moeller / Siemens) Star-delta start, rubber vibration dampers E-rotor with machined knife pockets Gearbox limit switch 1st knife row Hold-down device on slide for long and large parts Special scraper knives to prevent lateral jamming Weight: 1100 kg Availability: short-term Storage location: Flörsheim

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue Djdpfx Abjlwvuxs Towf • standard equipment

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated Dwjdpfxedl E Iij Ab Tsf -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio Dwodpfx Aboki Tqcj Tjf “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Expected price 15 K euros, but I will consider any reasonable offer Dwjdpewf Rbijfx Ab Tof

Condition: used, Size max 220 x 297 mm Speed max 2.700 c/h Equipment • automatic feeder Dedpfx Aec Rgu Heb Tewf • 4 knives cutting station • edge corner cutting station • delivery

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Dsdpfeu Ridlox Ab Tjwf -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Hole diameter: 50 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Year of construction: 1993, condition: good (used), Built in: 1993 Size: 350 x 440 mm Speed: 6.600 c/h Equipment: • right hand infeed equipment for changing the format: Djdpfsdym Svsx Ab Towf • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • info: with cassettes

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: ZESPA NORMAX, face milling cutter head corner milling cutter -Type: Ø 100 mm Dedovz T Hzopfx Ab Towf -Hole: Ø 32 mm -Dimensions: Ø 100 x 45 mm -Weight: 1.7 kg

Condition: good (used), Size: max 460 x 315 mm Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker • 1 set of clamp plates & plate holders • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives Dwodpod S Svbefx Ab Tsf • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm Dodpfx Abjvwlzis Tewf -Weight: 4.4 kg

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication Dwedpspgwausfx Ab Tjf standard accessories

Condition: good (used), Circular knives, round cutting knives, machine knives, replacement knives for cutting machines -Circular blades: replacement blades for cutting machines -Blade size: 400x30x3 -Serial number: 207484 -Number: 3x knives available -Price: per piece -Weight: 2.9 kg/piece Dsdpfx Ajitdinjb Towf

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, Kuttermesser -Type: R350 5 220V 0.R 230 92 -Quantity: 1x knife. available Dedpfx Aevwlvaeb Tjwf -Dimensions: 390/230/H20 mm -Weight: 1.7 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R230.19 8250-12 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 300 x 60 mm Dwsdsu Ribkopfx Ab Tsf -Weight: 24.1 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Dwodpfx Aou Ricujb Tjf -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Number: 2x milling head available -Price: per piece -Dimensions: Ø 260 x 60 mm -Weight: 14.1 kg/piece

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8200-C Dwjdpfx Aou Ridrjb Tsf -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Dwodpfx Abou Rid Eo Tjf -Manufacturer: Seco, face milling cutter head -Type: R.52.84 01 03 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 200 x 35 mm -Weight: 4.4 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8160-C -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm Dwjdpfx Abju Ria Hs Tef -Dimensions: Ø 173 x 60 mm -Weight: 6.1 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 Dwjdpjvz T Aisfx Ab Tsf -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg