Used Haas Cnc for sale (226)

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) Iijdpsz Nz T Hsfx Ahyoh • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive Iisdpfsz N Dmvjx Ahyoh • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: good (used), Year of construction: 2016, functionality: fully functional, Haas control system, 5-axis machining center, Coolant through the spindle (CTS), 40-position tool magazine, Isdoz Rzapjpfx Ahyjih Spindle speed 12,000 rpm.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) Iijdpfsz N Ergjx Ahyeh • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Iisdpfxjz R Alts Ahyeh Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: used, Year of construction: 2012, x-travel 2134 mm Ijdpfx Aox E Dn Nehysih y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. Isdpfx Ahsx U D Etsysih ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Iodpfxszy Npfe Ahyjih Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: used, Year of construction: 2007, turning diameter 250 mm turning length 500 mm control FANUC tool taper VDI 40 weight of the machine ca. 3,0 t HAAS SL-20THE CNC Lathe – Year 2007 Iodezvq Dispfx Ahysih Technical specifications - Max. turning length: 500 mm - Max. turning diameter: 250 mm - Swing over bed: 584.2 mm - Swing over cross slide: 241.3 mm - Distance between centers: approx. 609.6 mm - X-axis travel: 214.6 mm - Z-axis travel: 508 mm - Spindle nose: A2-6 - Spindle bore: approx. 76.2 mm - Max. spindle speed: 4,000 rpm - Spindle motor power: 14.9 kW / 20 HP - Driven/live tool stations: up to 10 - Input voltage: 360–480 V - Power supply: 3-phase

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A - Full-load current: 40 A - CNC control: FANUC Features - 12-position tool turret - VDI-40 tool holder Iijdpfx Ahozvq Dvjyeh - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h Iijdpfjx D I Stex Ahyeh • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Ijdpfxoz Ihc Rj Ahyjih Renishaw probing system 4th axis, wired Video available!

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Iiodpevvt Emofx Ahysh Electric coolant system provided. Tool measuring system available. I.D. *

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Iedpfxezwxz Es Ahyoih Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Ijdpjzylhkjfx Ahysih Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 8100 [rpm] - Gearbox - Speed ranges : 2 - Number of spindle hours : 4000 [h] LINEAR AXES - Travels on X/Y/Z axes : 1270/508/635 [mm] Iijdpjyn R Igsfx Ahyjh - Rapid traverses rates (X/Y/Z) : 35.6/35.6/35.6 [m/min] - Cutting feed rates (X/Y/Z) : 21 [m/min] - Distance table / spindle nose (min./max.) : 742 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1321/495 [mm] - Maximum weight upon table : 794 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870/2510 [mm] - Machine height : 2690 [mm] - Machine weight : 6260 [kg] MACHINE HOURS - Number of hours under power : 16247 [h] - Number of working hours : 6025 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Rigid tapping - Prepared for a 4th-5th axis divider - Coolant tank : 208 [l] - Chips conveyor - Tool probe - Electric transformer

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, Iedpfx Aezk H Hvehysih 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, Ijdpfx Aoz Sqqmshyeih 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: used, Year of construction: 2008, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Haas VF3YT/50 CNC milling machine. Ideal for precision machining of metals and other materials. Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-660mm, Z-635mm Table: 1372mm x 610mm Rapid traverse rate: 18 m/min Table load: 1814 kg Spindle taper: SK50 Spindle speed: 7500 rpm Spindle gearbox: 2-speed Spindle power: 22.4 kW Number of tools in the magazine: 30 pcs Machine weight: 7.5 t Dimensions: L x W x H 3.5 x 2.4 x 2.9 m The machine is equipped with: - Renishaw OMP40 workpiece probe - TSC internal spindle cooling - Automatic chip conveyor Iedpfxszwhlgs Ahysih - Programmable coolant nozzle - Side tool magazine - Rigid tapping - Macro - HSM high-speed machining option - Increased memory up to 16MB It is possible to equip the milling machine with a 4th-axis rotary table. The machine has been serviced, is in good working order and ready for operation. The milling machine can be inspected and tested at our company's premises. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Bar capacity, maximum speed: 51mm, 4000rpm Maximum power rating, drive system: 22.4kW, belt drive Iijdevamdqspfx Ahysh Spindle nose, chuck size: A2-6, 210mm Axis travels (X, Z): 236mm, 533mm 12-station VDI tool turret Haas controller Rigid tapping option Automatic tool presetter Belt-type chip conveyor Programmable hydraulic tailstock Manufactured in 2013 Machine in very good condition. Machine fully inspected, cleaned, and aligned. More pictures and videos are available.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm Iiodszh Eh Tspfx Ahysh • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox Iedsxrf Stjpfx Ahysih • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Iodpfx Aoz Ea Hpehyjih

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock Isdjz Izyispfx Ahyjih • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg Iisdpfx Ahsxqc H Sjyjh - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.