Used Guest Room for sale (2,225)

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° total power requirement 3 kW weight of the machine ca. 1,2 t Dlodpfx Aevzhidob Tja dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: used, The machine can be inspected at our premises. Dsdpeviq Tzefx Ab Tola

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Dljdpfsq H H Ruox Ab Tja Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: good (used), Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Dlodpfxsiauife Ab Tsa Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Dledjggyigspfx Ab Tja Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Djdpfxstv Ii Io Ab Tjla Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: used, Year of construction: 1989, x-travel 600 mm Djdstqqn Dspfx Ab Tola y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t dimensions 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: used, machine/vehicle number: 2806-0743, x-travel:800 mm y-travel:550 mm Dlodpjcxxngjfx Ab Toa z-travel:500 mm table surface area:(B x T )1000x550 mm spindle turning speed - stepless:0 - 5000 U/min feed speeds - directly programable:2- 6000 mm/min rapid traverse:6,0 m/min quill stroke:80mm mm Tool bore:SK40 total power requirement:12 kW weight of the machine ca.:3,9 t dimensions of the machine ca.:(LxBxH) 2200x2800x2400 mmxmmxmm Deckel FP5 NC Universal Milling Machines - CNC - Swivelable left or right) 90 ° & Tilting Vertical Spilndle Head - Rigid Fixed Table: 1100 x 550 mm (Max. Load 450 kg) - High RPM on Both vertical and Horizontal Spindles - Powerful 9,0 kw AC drives for Main Spindle - Equipped with Electronic handwheel and handheld rapid travel attachement - Dialog 4 - 3D Path Control System. - Seperate Power cabin, Chip tray

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, Dlsdpfx Aotqqn Rjb Tsa coolant

Condition: used, machine/vehicle number: 1621, x-travel:800 mm y-travel:300 mm z-travel:400 mm table-size:1000 x 440 mm Tool taper:SK40 spindle speeds:40 - 2000 U/min speed steps work spindle:18 spindle speed max.:( 6000 Possible by interchanging the Belt U/min feed range:10 - 500 mm/min feed steps:18 total power requirement:3 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:1600x1550x1930 m The models FP3L has a tilting Spilndle Head can be swiveled 90° left or right direction for vertical and horizontal machining application. Dledpfx Abeh Ra Nqs Tsa - With Rigid Angular Table: 1000 x 440 mm (6 nos of "T-Slots" with of 12mm width) - With 2 Step Dial Configaration for Quick changing on Speed and Auto Feed - Quick Lever for rapid traverse movement on all axis - Universal Table , Separate power cabinet, and Chip tray

Condition: used, Year of construction: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm table surface area 940 x 510 mm spindle taper SK 40 spindle turning speed range 32 - 1600 U/min feed - longitudinal/cross 8 - 400 mm/min feeds vertical 4 - 200 mm/min Dlsdevzhh Tjpfx Ab Toa total power requirement 4,5 kW dimensions of machine L x W x H 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant

Condition: used, Year of construction: 1980, x-travel:500 mm Dodscxxq Dspfx Ab Tela y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW total power requirement 20 kVA Dlodpstqqtbjfx Ab Tja weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW Dodpfx Abeiv Tf Hj Tola total power requirement:2,8 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: used, Year of construction: 2000, x-travel 600 mm y-travel 400 mm z-travel 400 mm table surface area 800 x 400 mm spindle taper SK 40 control HEIDENHAIN TNC 310 spindle turning speed range 10 - 3150 U/min spindle drive 5,5 kW feed - longitudinal/cross 1 - 5000 mm/min feeds vertical 0,5 - 2500 mm/min Dledpfxsux Agio Ab Tea rapid traverse 6 / 6 / 3 m/min total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of machine L x W x H 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm Dedpfx Ajvimrmeb Tela T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW Dlsdpfx Astqqyiob Tea quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t dimensions of machine L x W x H 4,95 x 2,30 x 2,30 m Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 T - slots - width:12 mm spindle speeds::20 - 2000 U/min turning speed range - vertical:60 - 1200 U/min turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine Dlodpfecxxliox Ab Toa - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 450 mm z-travel 450 mm control PHILIPS CNC 432 table surface area 740 x 440 mm spindle taper SK 40 spindle turning speed range 20 - 5000 U/min Dledpfx Abetq I Hqj Tja feeds 1 - 4000 mm/min rapid traverse 6 m/min quill stroke 80 mm toolpiece magazine: chain magazine 30 Pos tool diameter if 2 vacant positions max. 130 mm tool diametre at full load 100 mm tool length - max. 250 mm weight of tools max. 8 kg total power requirement 15 kVA weight of the machine ca. 3,8 t Accessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolant

Condition: used, machine/vehicle number: 420285, x-travel:1120 mm y-travel:420 mm z-travel:620 mm spindle taper:SK 40 spindle speeds:30-2000 1/min table dimension - longitudinal:1600 mm Dledpfxecxxm Ij Ab Toa table dimension - cross:400 mm

Condition: excellent (used), Year of construction: 1986, x-travel 500 mm y-travel 430 mm Dlsdpewi Ugdsfx Ab Tea z-travel 400 mm table surface area 800 x 390 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min spindle drive 3 kW quill stroke 80 mm feed - longitudinal/cross 4 - 1600 mm/min feeds vertical 4 - 1000 mm/min rapid motion -longitudinal/cross/vertical 1,6 / 1,6 / 1,0 m/min control HEIDENHAIN, TNC 135 total power requirement 5 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 2,3 x 2,3 x 1,7 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Dljdpfx Aecxxwasb Tea - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min Dsdpfx Abjt U Rm Ie Tsla table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, Year of construction: 2003, x-travel:760 mm y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 column arm:171 - 476 mm total power requirement:2,4 kVA Dodpfxot U Rm Uj Ab Tela weight of the machine ca.:0,95 t dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min Dedpfx Ajcxxntjb Tsla feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch