Used Gripper for sale (735)

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Ljdpfx Afox E Advofjak

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Lodpfox Ezyvsx Affsak Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: excellent (used), Year of construction: 2021, total width: 1,040 mm, total length: 1,450 mm, total height: 2,270 mm, overall weight: 1,100 kg, For Sale: - Sixpak (dosing, weighing, counting) - Sheff Foodpicker - with vision camera / control - 50 picks per minute - Easy to integrate into production line - Dimensions (L x W x H): 1450 mm x 1040 mm x 2270 mm - Weight: 1100 KG - Application: Random bin picking using 3D vision technology - Construction: Stainless steel - Product changeover: within 2 minutes, tool-free - Vision system: 3D - IP rating: IP65 or higher - Robot module: Denso Scara - Gripper: vacuum pad with missed pick detection - Operation: Industrial PC with touchscreen HMI Up to 100 product programs If you have any questions or comments, please do not hesitate to contact us. Videos can be provided upon request. Inspection on site is possible. Price per unit: €25,000 EXW Transport to be arranged in consultation 3 units available. Best regards, Leo Holland Lodpfox Ai E Sjx Affoak

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control manufacturer: Siemens, Model Sinumerik 840D sl Powerline, 2 work areas, 2 cross slides, X/Z travel, 2 spindles, rotational speed, C-axis workpiece spindle: 3,000 rpm, high-frequency internal grinding spindle: (51,000 rpm) (for grinding arbor), max. feed rates Z 30 m/min, X 90 m/min, max. workpiece diameter 100 mm, max. workpiece length 50 mm, 2x 8-position tool turrets, tool holder Capto C5, workpiece automation with drag conveyor system and gripper, coolant system, paper band filter, oil separator manufacturer: Mahle, type LGA601, oil mist extraction, recooling unit manufacturer: Hydac, chip conveyor manufacturer: Astos Laodpox Ahivefx Affsk +++ Attention: This machine is part of an online auction! +++

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Lajdpfxox Ag Eps Affjk Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Condition: good (used), Weingarten Eccentric Press AV10 - with gripper feed - uncoiler and recoiler - During pressing, the speed can be adjusted via frequency converter - Pressing force: 10 t - Strokes per minute: 160 - Ram stroke: 6-60 mm - Ram adjustment: 40 mm Good condition, fully functional, can be inspected and tested under power on site. Shipping also possible abroad. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. Should you have any general questions or wish to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping by freight company. Laedpfx Ajx Emvvoffok

Condition: good (used), Year of construction: 2021, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, We offer you: Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 95 monoBlock Year of manufacture: 2021 Control: Celos with Siemens 840D sl Operate Travels: - X-axis travel: 950 mm - Y-axis travel: 850 mm - Z-axis travel: 650 mm - C-axis: 360° - A-axis: +/- 120° Main spindle: - Speed: 20,000 rpm - Drive power (40/100%): 25 / 35 kW - Torque: 130 / 86 Nm - Tool holder: HSK-63A Worktable: - Fixed table with integrated rotary table - Table diameter: C-axis 850 x 750 mm integrated in fixed table 1,000 mm x 750 mm - Max. table load: 1,000 kg - Max. workpiece dimensions: Ø 1,040 mm (clampable) / Ø 850 mm (machinable), height 590 mm Tool changer: - Number of tool positions: 60 - Tool change time (chip-to-chip): 5.9 s - Max. tool diameter: 80 / 160 mm - Max. tool length: 420 mm - Max. tool weight: 8 kg Rapid traverse: - Rapid traverse speed (X/Y/Z): 40 m/min - Max. feed speed (X/Y/Z): 40,000 mm/min - Power-on hours: approx. 25,300 h - Operating hours: approx. 7,200 h Technical features and accessories: - Double-gripper tool changer - MPC – Machine Protection Control - Economic Production Package (GER / EU) - Production package: Scraper flight conveyor with coolant system 600 l / 160 gallons Paper band filter Internal coolant supply, 40 bar / 23 l/min, through the spindle center (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabinet door (no standard coolant tank) - Spray gun for chip cleaning - Air blast cooling through the spindle center, selectable via M function - Chip flushing in the cabin door: 1.5 bar / 60 l/min (theoretical pump capacity, recommended for high chip volumes) - Coolant ring nozzle for the vertical head: 16 water jets, 7 air jets - Mechanical and electrical interface for oil and emulsion mist extractor - Infrared probe, type Renishaw PP60 optical (OMP 60) - Tool measurement in the work area, Blum Laser DIGILOG - 3D quickSET preparation - SGS – Spindle Growth Sensor - Increased accuracy - Electronic handwheel - ATC (Application Tuning Cycle), programmable feed parameter selection for the machining process: accuracy / surface quality / speed - DECKEL MAHO MDynamics package - IoTconnector - Machine Data Connector (MDC) - NETservice - SERVICEcamera - 3D data model in STEP format for integration into CAD systems The clamping devices shown are not included in the scope of delivery. Accessories and depicted tools are only included if specified in the additional information. Ledpfxsx Ekt Es Affeak Subject to changes and errors in technical data and details, as well as prior sale!

Condition: new, Year of construction: 2023, functionality: fully functional, Welding booth with robot, welding power source and controller for welding small workpieces Components as new, suitable for salvage (1) Crede Welding System (Unit price EUR 60,000) consisting of: - T13 Controller for controlling 2 welding stations - LT 5000A Power Unit - Cooling unit - 2x split seam welding heads SSK (2) Robot KUKA KR 20 R1810-2 (Unit price EUR 20,000) with: - Ethercat communication to external Beckhoff PLC - Diagnostics Safety 3.2 - SafeOperation 3.6 - GripperSpot Tech 5.0 Lasdjvwz Huopfx Affok

Condition: used, Year of construction: 2024, Year: 2024 Condition: verry good, functional - available - end of January 2026 Laedpfxsx Eb D Se Affek Configuration: - Gripper "M" Specification: - speed: 300 packets / h - unloading high 900 mm - automatic change of loading pallet from left to right

Condition: new, Year of construction: 2025, functionality: fully functional, pallet changer: manual, Samzon MPT1700-10 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. Lasdpfxsx Ebn Rs Affsk *Hydraulic locking-pawl for very easy handling of rotation.

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Laodjx Ag Azepfx Affjk Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: AE/21582, Operating voltage: 400 V/50 Hz Rated current: 44 A Weight: 4800 kg Year of manufacture: 2001 Lsdpfet Dva Sox Affjak Panel cutting saw from SCM manufacturer, made for industrial applications Robust design for high productivity and precision Cutting height/saw top allowance: 115 mm Max panel width: 3200 mm Panel max length: 3200 mm Number of grippers: currently 6 Loading: front

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm Lasdocb T Twspfx Affsk no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Lajdpsxz I A Hsfx Affek Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Year of construction: 2000, condition: excellent (used), Kaltenbach / APS CNC Flat Bar / Angle Punching / Shearing Line – Year 2000. 500mm Capacity Flat Bar. 60mm x 160mm Angle. 3 head Punch. Horizontal punch. Ljdpfx Afeirakrjfjak 12 metres Gripper feed. Mitre Shearing.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg Lajdpfx Aexz A Udeffsk T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Year of construction: 2020, condition: excellent (used), Punching capacity 165 t max. paper size 760 x 600 mm KAMA ProCut 76 Hot Foil Premium edition Year of construction 2020 Total counter: approx. 2.6 million Equipment packages: Premium Edition: AutoRegister, pneumatic die clamping (only 76 series), punching force indicator with overload protection, universal clamping frame, clamping frame rack, vacuum pump and compressor. Ljdpswzmx Nsfx Affoak Accessories for special applications: Servo main drive for asynchronous drive cycle, up to 50% increased machine speed or longer contact time for hot foil pre- gation Technical data: Max. Sheet format: 760 x 600 mm Min. sheet format: 279 x 210 mm Max. Punching format: 743 x 585 mm Material thicknesses: Paper from 100gsm, cardboard up to 1500gsm (approx. 1.8 mm) Production speed: Up to 5,500 sheets per hour Punching force: 165 tons Gripper edge: 10 mm

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: AE/024990, Operating voltage: 400V, 43A, 50 Hz Cutting dimension: 3200x2100 Saw projection: 105 mm Saw carriage speed: 0 - 60 m/min Gripper speed: 38 m/min Saw carriage speed: 6300 rpm Grippers: 6 Saw drive: 7.5kW Undercutter: 1.5kW Saw size: 380mm Ljdjt Dvaljpfx Affeak

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Lajdpfx Afoxzvamefek Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: TNC 7, _____ Description: Year of manuf. : 2024 Control : Heidenhain TNC 7 Speed : 16000 rpm Movement X/Y/Z : 2100/2100/1250 mm Tool holder : HSK 100 In General: Year of manufacture:2024 Control:Heidenhain TNC 7 Travel distances X/Y/Z:2,100/2,100/1,250 mm Tool holder:HSK 100 Milling head: Technology:Universal milling head with controlled B-axis Spindle:Motor spindle Speed:16,000 rpm Max. power:52 kW Max. torque:404 Nm Tool holder:HSK 100 Media feed:Blowing air + cooling lubricant NC rotary table: C-axis:360° Clamping surface:1,700 mm Tool magazin: Technology:Wheel magazine Tool changer:Double gripper Number of stations:123 Cone cleaning:Rotating brushes Lajdpfsxzxacex Affjk Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Coolant temperature control:Immersion recooler Position measuring systems:Direct in all axes Accuracy package:µ-Precision package Workpiece measurement:Renishaw OMP 600 Tool measurement:BLUM laser Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Machine protection:MPC (quick shutdown) Digital manufacturing:IOT Connector, MDC, NETservice CAD import:DXF, STEP, and IGES formats Emulsion mist separator:Mechanical Setup mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. Ljdpsxmvm Rsfx Affoak INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: used, Year of construction: 2003, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Lodpfx Asxlrf Toffoak Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Condition: used, Year of construction: 2001, operating hours: 74,900 h, functionality: fully functional, machine/vehicle number: 01180001301, turning length: 1,100 mm, turning diameter over cross slide: 600 mm, turning diameter: 600 mm, spindle motor power: 23,000 W, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 320 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,097 mm, rotational speed (max.): 3,600 rpm, bar passage: 72 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, total height: 2,130 mm, total length: 5,560 mm, total width: 2,400 mm, overall weight: 8,700 kg, controller manufacturer: Heidenhain, controller model: CNC Pilot 3190, nominal power (apparent): 58 kVA, workpiece diameter (max.): 600 mm, Equipment: documentation/manual, Main spindle – tailstock – steady rest Part catcher with conveyor belt Spindle reduction, diameter 12–70 mm 200L coolant tank 20 soft jaws, 1 hard jaw, 2 gripper jaws 12 tool stations – 6 of them powered 3x axially driven tool EWS 3x radially driven tool EWS Operating hours 74,900 – Spindle hours not displayed Travel X 320 mm Y+/- 50 mm Z 1,097 mm Distance between centers 1,285 mm Extraction unit Control: Heidenhain CNC Pilot 3190 – Software V5.3 Max. speed of driven tool: 4,000 rpm Lajdpfsxugrmex Affjk 6x revolving centers Tool measuring system – Marposs

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Lsdpfjxzmp Esx Affoak Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Lasdoxmvnuopfx Affsk Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.