Used Grinding Cylindrical for sale (4,542)

Year of construction: 1958, condition: ready for operation (used), Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible. Hfsdpfjyg Nvmex Ab Uen

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm Hfsdod Ih Dvopfx Ab Uen grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled machine according to Kellenberger new machine protocoll

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t Hjdpfx Ajwl A H Deb Ujfn

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Hjdpfx Ajzc D Dkjb Uefn Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Hodpfx Abjtt Rawe Usfn Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: like new (used), Centerless grinding machine ESTARTA 301 CNC Hedpfx Aoxfqzmjb Uofn

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hfsdpfox Avtcsx Ab Uen #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Kelco 90 weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Hfsdpey R Ed Ajfx Ab Ujn Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Längspositionierung Movomatic TMP91

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, center height in crank: 200 mm, center height: 200 mm, workpiece weight (max.): 100 kg, grinding length: 1,000 mm, workpiece weight between centers: 100 g, workpiece diameter between centers: 400 mm, On behalf of a customer, I am offering this machine, which is in nearly mint condition. It is currently still powered up. The machine is equipped with the following options: Glass linear scales in X and Z axes Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1-2-3 (prepared for HF internal grinding spindle) Hfedsw Ed D Rspfx Ab Usn T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning at the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request.

Condition: good (used), Distance between centres: 1000 mm Centre height: 180 mm Max. grinding diameter: 355 mm Max. workpiece weight between centres: 300 kg Max. weight with chuck: 125 kg Hfsdpfx Asw Dqmiob Usn Cross slide travel (X-axis): 350 mm X-axis feed rate: 0.01 / 6,000 mm/min X-axis resolution: 0.0001 mm X-axis measuring system: Digital scale Longitudinal slide travel (Z-axis): 1,300 mm Z-axis feed rate: 0.01 / 15,000 mm/min Z-axis resolution: 0.0001 mm Z-axis measuring system: Digital scale Grinding wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm Main motor power: 7.5 kW Grinding wheelhead swivel angle: -30° / +210° Workhead spindle speed: 10 / 800 rpm Workhead taper: MORSE 5 Tailstock taper: MORSE 4 Tailstock quill diameter: 60 mm Tailstock quill travel: 40 mm Control type (cnc/manual): CNC CNC brand: FAGOR CNC model: 8040-T Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height Approx. weight: 6,500 kg

Condition: good (used), Distance between centres: 1000 mm Centre height: 180 mm Max. diameter to grind: 355 mm Max. workpiece weight between centres: 300 kg Hedpfew Dqg Aex Ab Usfn Max. workpiece weight with chuck: 125 kg Cross traverse (X axis): 350 mm X-axis feed speed: 0.01 / 6,000 mm/min X-axis resolution: 0.0001 mm X-axis measuring system: Digital scale Longitudinal traverse (Z axis): 1,300 mm Z-axis feed speed: 0.01 / 15,000 mm/min Z-axis resolution: 0.0001 mm Z-axis measuring system: Digital scale Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80 mm Main motor power: 7.5 kW Wheelhead swivel angle: -30º / +210º Workhead spindle speed: 10 / 800 rpm Workhead spindle taper: MORSE 5 Tailstock taper: MORSE 4 Tailstock quill diameter: 60 mm Tailstock quill travel: 40 mm Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height Approx. weight: 6,500 kg

Condition: excellent (used), Center height 300 mm Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm With DRO With measuring control MARPOSS Hedpfx Abjtpgnhs Ujfn Misc.accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm Hfedpsttxg Sefx Ab Ujn grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m

Condition: good (used), Working wheel dimensions (od x id x width) Ø610x80xØ304.8 mm Brand CNC FANUC Model CNC 21 Oi TB Maximum length between points 1060 mm Max. travel Z axis 750 mm Max. length to be ground 600 mm Point height 225 mm Ø min/max to be ground 10 - 300 mm Max. weight of the piece 125 Kg Max. travel X axis 325 mm Grinding wheel speed 45 m/s Main motor power 11 Kw Working head speed 30 to 1000 rpm Working head cone MORSE 5 Working head motor power 12 Nm Tailstock cone MORSE 4 Tailstock quill travel 70 mm Tailstock hydraulic movement 150 mm Total power 22 Kw Length 2300 mm Height 1900 mm Width 2634 mm Weight 7750 Kg Accessories Cooling equipment with paper filter; MARPOSS meter, positioner and balancer; Hsdpfx Abotrgugs Uofn

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 Hjdpoyb S Rcefx Ab Ujfn weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: used, centre height 200 mm dist. between centers 1.000 mm grinding length 1.000 mm max. workpiece diameter 360 mm grinding wheel width 127 mm spindle tunring speed 1.500 U/min turning speed range - workpiece spindle 15 - 320 U/min dimensions 2,80 x 1,50 x 1,70 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has been overhauled. The guideways have been re-scraped. The spindle has new bearings. The control cabinet is new. Accessories, tools, and clamping devices shown in the images are only included Hfjdjy Ay N Djpfx Ab Uen if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Hjdpfxotqf Sqe Ab Ujfn Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hodpfx Abstqf Rze Uofn Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: like new (used), Year of construction: 2009, functionality: fully functional, We are selling this grinding machine, which is connected and available for testing. Machine parameters: - Grinding of rotational parts clamped between centers with an accuracy of 0.001 mm - Max. swing diameter: 0–1,450 mm - Max. turning length: 6,000 mm - Max. workpiece weight: 20,000 kg (25,000 kg with steady rests) - Grinding wheel diameter: 915 mm - Wheel width: 100 mm - Non-contact measurement of dimensions, tolerances, and workpiece geometry, including printout of measurement protocol - 100% ultrasonic measurement possible Hfedpfx Absxxrzze Uen - CNC control with capability for profile grinding (taper, concave and convex, CVC) - Grinding of ceramic and metallic coatings using diamond and ceramic grinding wheels The machine is currently completing an order.

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader Hsdpfoy U N Hijx Ab Usfn KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. Hodjiv Au Espfx Ab Uofn New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Hedpfx Aboyg Nvtj Ujfn

Condition: used, Year of construction: 1990, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm max. workpiece weight between centres 250 kg Maschine mit sehr wenigen Betriebsstunden nach Überholung Hsdexbh Ebjpfx Ab Usfn beim Karstens Fachbetrieb. Zustellsteuerung Jetter Digitalanzeige Innenschleifvorrichtung Reitstock mit Zylindrizitätsfeinverstellung Hydraulische Reitstockpinole Etc... Luftkissenschnellverstellung Schleifspindelstock

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for X/Z axis Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Tool holder for workpiece spindle: MK 5 Tool holder for tailstock: MK5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with full enclosure Preparation for dust extraction system included Hedpev N D Hbefx Ab Usfn Separate screen, touch probe control, automatic balancing and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Immediately available. Optional filter system available in various designs.

Condition: used, Year of construction: 1990, grinding diameter 200 mm grinding length 340 mm Hfjdpfx Absywnt He Uon centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC