Used Grinding Cylindrical for sale (4,681)

Condition: used, Year of construction: 2017, grinding length 1500 mm Ledswm Rqgspfx Affota centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: repair required (used), Type AS - 900 Machine No. 74054 Ljdpfx Asx Hfcweffjta Centre distance 900 mm Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Ltjdpfxex A Dfyj Affoa Technical specifications: Grinding diameter: 300 mm Grinding length: 1500 mm

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Ltedpfx Aewb Dq Njffja

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 30 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, total width: 2,600 mm, total length: 1,800 mm, grinding diameter: 100 mm, workpiece weight between centers: 30,000 g, distance between centers: 400 mm, type of input current: AC, spindle speed (max.): 1,000 rpm, spindle speed (min.): 90 rpm, grinding spindle motor power: 3,700 W, grinding spindle speed: 2,000 rpm, overall weight: 2,000 kg, pivoting range: 30 °, input voltage: 400 V, Equipment: rotational speed infinitely variable, incl. swiveling internal grinding attachment General Diameter over table: 200 mm Distance between centers (ABC): 400 mm Grinding length: 400 mm Grinding diameter (max. / min. OD): 100 / 6 mm Grinding diameter (max. / min. ID): 85 / 6 mm Max. weight between centers: 30 kg Max. weight incl. chuck: 10 kg Grinding spindle Grinding wheel size: 350 x 127 x 50 mm Minimum usable grinding wheel size: 300 mm Spindle speed: 1800 – 2000 rpm Spindle motor power: 3.7 kW (Peripheral) speed: 33 m/sec Rapid traverse: 40 mm Rapid traverse with handwheel: 20 mm Max. automatic infeed on diameter: 1.7 [3.4] mm Minimum diameter increment: 0.001 mm Infeed speed on diameter (coarse/fine): 0.015 – 6 / 0.015 – 3 mm/min Table Table speed: 0.1 – 5 m/min Table stroke: 450 mm Minimum travel: 2 mm Maximum table swivel range: -2° to +30° Work spindle Taper bore: MT-4 Spindle speed: 90 – 1000 rpm Spindle motor power (2-stage): 0.28/0.37 kW Including complete set of Schaublin collets DM 2.5 – 20 Incl. 3-jaw chuck Ledpfxjx E U Hie Affota Incl. flange with grinding wheel

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 12145 MAG, total width: 9,000 mm, total length: 8,000 mm, total height: 5,000 mm, type of input current: AC, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Power Automation, controller model: PA 8000 HS, laser hours: 53,000 h, laser power: 6,000 W, laser wavelength: 10,600 nm, positioning accuracy: 0.01 mm, shaft length: 10,600 mm, type of cooling: water, control type: CNC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, actuation type: electric, laser source model: TruFlow 6000, Equipment: CE marking, cooling unit, documentation/manual, Offered due to cessation of operations: Used 5-axis laser cutting and welding system with 6000-watt CO2 laser: Manufacturer: Maschinenfabrik Arnold, Ravensburg Ltsdpfx Aex E Udneffoa Model: full flying optic, 12145 MAG Year of manufacture: 1994 Working areas: X-axis: 4000 mm Y-axis: 2500 mm Z-axis: 1000 mm C-axis: 400 degrees B-axis: +/- 120 degrees Machine body: welded steel frame in open "C" design; Y-axis with gantry drive Linear axes with ball screw drive, rotary axes with toothed belt digital position feedback via encoders Workpiece holding: 3 modular tables with T-slot system CNC control: Power Automation PA8000 HS Aperture up to the processing optics: 100 mm Processing optics aperture: cutting 35 mm; welding 50 mm Cutting head: Precitec system Welding head: Arnold system CO2 laser: TRUMPF TruFlow 6000 with ECQ unit, plus telescope and DWS mirrors for beam shaping - Year of laser source: 2008 Operating hours: - Beam on: approx. 10,600 h - Laser on: approx. 53,000 h - In 2024, all gas coolers as well as resonator optics replaced (TRUMPF invoices available) Laser cooling system: - Heat exchanger unit by KLH, year of manufacture 2008 - Cooling tower by Rehsler, year of manufacture 2008 The laser system is currently still under power and available for inspection. Immediate availability. All information without guarantee. Prices are net, plus VAT at the current rate. Ex works, without packaging. Dismantling and loading by the buyer, support from our side within our possibilities. Further details gladly on request or during an on-site inspection. Sale to commercial customers only. No warranty or returns.

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Ltodpfx Afex Avtcefsa Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 24 t dimensions of the machine ca.: 3900 x 3500 x 2500 m -the machine has no B axis -two grinding spindles with one grinding wheel each - The transport instructions can be found in the documentation (attachment). including Hoffmann KSM filter system Ltsdpfx Afsx Aq Etofsa Loading list available Operating data v. : Operating time: 21727 h / production time: 11960 h Machine documentation: 1 set of circuit diagrams, electrical plans, operating instructions Accessories: 2 replacement measuring heads Marposs S/500; prism supports Other: Hoffmann KSM filter system Machine condition: according to age, due to processing with emulsion *

Condition: good (used), Year of construction: 1968, Malcus MC40 Centerless Cylindrical Grinding Machine Manufacturer: Malcus Halmstad, Sweden Model: MC-40 Year of Manufacture: 1968 Control Panel: Mechanical push-button control with main switch and emergency stop Grinding Units: Two opposing units with adjustable guide and grinding supports Lsdpox Aq A Eefx Affota Machine Construction: Heavy-duty cast iron frame Condition: Used, fully functional The Malcus MC40 is a robust centerless cylindrical grinding machine made in Sweden, renowned for its reliable precision during continuous industrial operation. The machine features a solid cast iron construction which minimizes vibration and ensures consistent grinding results. Its opposing grinding and guide assemblies can be precisely adjusted, making it ideal for machining rotationally symmetrical workpieces. An integrated dressing device keeps the grinding wheel in optimum condition during use. The mechanical control panel with its clearly arranged elements enables intuitive operation of the grinding process. Designed for high stability and long service life, this machine is an excellent choice for workshops and production facilities seeking a dependable solution for centerless grinding. No guarantee is provided for the accuracy, completeness, or currency of the information given.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Used CNC cylindrical grinding machine Make: FORTUNA Ljdpev Eyr Ssfx Affota Type: T23 S1000 ASW 45 CNC Year of manufacture: 1980

Condition: good (used), Year of construction: 2002, Offered here is a used CNC cylindrical grinding machine from the manufacturer Kellenberger, featuring a swiveling B-axis. The machine is currently powered and can be inspected on site. It will be loaded onto a truck free of charge. Manufacturer: Kellenberger Model: Kel-Vista UR 175 Year of construction: 2002 Control: GE Fanuc Series 21i-T Technical specifications: Key data: Center height: 175 mm Center distance: 1000 mm Grinding length: 1000 mm Workpiece diameter: 349 mm Intermediate unit: Rotating part with automatic indexing, division 2.5° Ledpfx Afox E D Eujfota Swivel range: -210°...+10° Workpiece spindle head: Swivel range: -10°...+100° Spindle speed: 8 - 800 rpm Internal taper: Morse taper 5 Guaranteed roundness for chuck work: 1 µm Workpiece weight for between-center grinding: 100 kg Tailstock: Taper: Morse taper 4 Quill stroke: 48 mm Grinding head UR: Left: 400 mm Right: 300 mm Internal grinding attachment: Mounting bore for high-performance internal grinding spindle: 80 mm Lower table (Z-axis): Center distance: 1000 mm Travel max.: 1150 mm Max. speed: 12 m/min Max. resolution: 0.1 µm Upper table: Center distance 1000 mm: 0°-6° With workpiece length under 800 mm: 0°-9° Grinding slide (X-axis): Travel: 320 mm Speed: 6 m/min Max. resolution: 0.1 µm Machine weight: 3,500 kg

Year of construction: 2021, operating hours: 5,475 h, condition: used, machine/vehicle number: 100000736, max. centre distance: 60 cm, max. grinding diameter: 44 cm, max. workpiece weight: 500 kg, control: SIEMENS Sinumerik/Balance Systems VM25, handling robot YASKAWA YR-1-06VXH12-A00, year of manufacture: 2022, serial number: 6V2272528290001, automation system/workpiece storage EGS Automation Danobat CG600-BL1, year of manufacture: 2023, serial number: 190605-6, 2-fold, filter 3FS M1600, no.: 565209, year of manufacture: 2021, weight: 85 kg, oil band filter MICROFILTER Easyband 150, serial number: 0202, year of manufacture: 2021, pump REXROTH HM-46, safety enclosure Ledpfx Afex Akkisfsta

Condition: used, Year of construction: 1990, functionality: limited functionality, Internal grinding machine T3i Lsdex Ezidspfx Affeta

Condition: used, Year of construction: 2006, Technical details: Ltjdpfx Afjvg Thiefoa grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm *

Condition: excellent (used), grinding wheel diameter: 508 mm, grinding length: 3,500 mm, overall weight: 8,000 kg, power of the servo motor: 42,000 W, year of last overhaul: 2010, Equipment: rotational speed infinitely variable, We are selling our own Lidköing 4B centerless grinding machine with circulation station from our subsidiary in Slovakia. The machine is powered and can be inspected. The circulation station is suitable for shafts up to a length of approx. 3,000 mm. This means that shafts with multiple grindings can be continuously finished. The coolant system has a cooling system for tempering the coolant. The Lidköping 4b grinding machine has an adjustable grinding and regulating wheel. The machine is from 1970 and was completely overhauled technically and electrically at Markmetall in 2010. The grinding machine was rebuilt in 2018 with a newly built circulation station from SH attachments/Markmetall. Since then, the machine can be operated as an automatic centerless grinding machine. Extensive documents are available. Ltsdpfjvuq Hxsx Affea

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 380078, overall weight: 13,500 kg, grinding diameter: 600 mm, center width: 1,100 mm, Equipment: rotational speed infinitely variable, Universal cylindrical grinding machine WEMA Glauchau SU 6-R – Year of manufacture 2014 Universal cylindrical grinding machine for internal, external, face, and taper grinding Universal cylindrical grinding machine SU 6-R by Werkzeugmaschinenfabrik Glauchau GmbH, year 2014, delivered on 28.02.2014. The machine is in well-maintained, ready-to-operate condition and is offered complete with a wide range of internal and external grinding spindles, filtration system, coolant unit, and accessories. Accessories & Clamping equipment: - Magnetic chucks (various diameters) - Workpiece holders - Grinding wheels in various sizes - Clamping devices - Spare and wear parts package - Measuring equipment (e.g., precision measuring device in cabinet) - Grinding wheel flanges - Tool holders - Various replacement filter rolls Condition: - Machine currently installed - Fully functional, regularly used - Interior well-kept, grinding area clean - Control, handwheel, and panel without visible damage - Accessories complete and neatly arranged - Viewing possible by arrangement Control: Siemens Sinumerik 840D sl, OP010C, 26.4 cm color display Operator PC: PCU 50.5-C, WinXP-based 40 GB hard drive, 12 GB available for applications Workshop-oriented programming (WOP) operating system Software status according to documentation: NC: V 02.07 SP3 HF10 HMI: V 07.06 SP2 HF7 11 axes according to configuration (HMI/NCK enabled) Space requirements: Machine: approx. 5000 x 4000 mm (L x W) Cooling unit: 3000 x 1200 mm (L x W) Working area Max. swing diameter: 650 mm Grinding diameter: internal 600 mm, external 650 mm Max. grinding length: 600 mm Center distance (external grinding): 1100 mm Max. workpiece weight (between centers): 150 kg Ledpfxox Ekcmo Affota Workpiece spindle head Internal clearance: 58.5 mm Speed range: 1–795 rpm Spindle nose DIN 55026 A8 Swiveling mechanism B1-axis: −1° to +12° U-axis travel: 300 mm Slides & Grinding units X2-axis travel: max. 470 mm Z2-axis travel: max. 800 mm Table stroke Z1-axis: 800 mm Internal and external grinding spindles: Internal (B2-axis, spindle turret) 1 spindle turret with stepless angle adjustment (1/1000°) Mounting for 2 internal grinding spindles Quick-change mechanism Supplied spindles: SFIV 60×315, hybrid bearings, approx. 38,000 rpm SPV 100×315, HSK-C50, approx. 16,000 rpm SSA 100×400, flange Ø140–250 mm, up to approx. 200 mm depth Internal grinding spindle 7.5 kW, 2,000–7,000 rpm (with Sinamics) External grinding unit 45° Wheel diameter: Ø600×50×Ø203.2 mm Grinding wheel silicon carbide, centrally guided Automatic balancing system (vibration sensor, control unit) Filtration system REBER compact belt filter, Type 13-P90131 Paper belt filter Magnetic tape separator Geared motors, fully functional Drain trough & sludge box included 4.2 Oil / Coolant chiller Hyfra TRK30-EF, year 2013 Cooling capacity: 4000 W / 37 °C Refrigerant: R134a 3/PE 400 V, 7.2 A 4.3 Recooler Hyfra Chilly 35, year 2013 Cooling capacity approx. 2.2–3.9 kW Refrigerant: R407c 4.4 Sight window Visiport VP220, rotating sight window

Condition: used, Year of construction: 1995, Centerless Cylindrical Grinding Machine Ghiringhelli M100SP400 Workpiece diameter: 1–50 mm Maximum plunge grinding length: 100 mm Grinding wheel diameter max.: 406 mm Grinding wheel diameter min.: 260 mm Grinding wheel width: 80 mm Grinding wheel speed (new): 2,140 rpm Grinding wheel speed (worn): 2,579 rpm Peripheral speed: 45 m/s Drive wheel indexability: ±6° Drive wheel diameter max.: 200 mm Lodpfx Ajxz R U Esffota Drive wheel diameter min.: 80 mm Drive wheel speed: 0–140 rpm Dressing speed: 200 rpm CNC control: Siemens 810 GA3 Machine width: 3,100 mm Machine depth: 2,700 mm Machine height: 2,000 mm Total weight: 2,500 kg Total power: 12 kVA Supply: 380 V/50 Hz Hydraulic pressure: 2–3 MPa Pneumatic pressure: 0.5 MPa No guarantee is given for the correctness, completeness, or accuracy of the information provided.

Year of construction: 2018, operating hours: 28,658 h, condition: used, machine/vehicle number: 18E400239, Through-feed grinding, grinding range Ø: 10 cm, plunge grinding, grinding range Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 handling robots YASKAWA YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-way, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, protective guard Lsdpfex Aki Ssx Affsta

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s Ltedpfx Afoxcblqsfsa dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: OE-70109, workpiece weight (max.): 500 kg, grinding length: 2,500 mm, grinding wheel diameter: 760 mm, total width: 4,500 mm, total length: 5,000 mm, total height: 2,900 mm, spindle speed (max.): 2,200 rpm, overall weight: 9,000 kg, workpiece spindle speed (max.): 500 rpm, controller manufacturer: FANUC, controller model: SERIES OI-TF, clamping length: 2,600 mm, grinding wheel bore: 304 mm, spindle mount: MK 6, tailstock quill stroke: 60 mm, workpiece diameter (max.): 850 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Ledpfjxm Tvcjx Affota Rated current: 3 x 100 A Connection: 63 kVA Grinding spindle: Feed X-axis Feed Z-axis Peripheral speed of grinding wheel: 45 m/s Incl. robotic cell from manufacturer XACTOOLS with loading unit and vibratory bowls, as well as an industrial robot from manufacturer EPSON, max. payload: 8 kg Incl. documentation NOTES ON COLLECTION: Collection must take place definitively between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: good (used), Year of construction: 1974, Digital display Grinding diameter 250 mm Grinding length 650 mm Ltjdpfjwpya Nsx Affja Accessories

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale! Ltedpfx Afjxzuyljfoa

Condition: used, Year of construction: 1999, grinding diameter 300 mm grinding length 500 mm Ltsdpfx Aoxzu Aajffja centre height 150 mm digital readout 2 Achs Mitutoyo Ka Counte Knoll PF 70 magnetic chuck ja type Schild nicht auffindbar

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: VECTOR078, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, TECHNICAL DATA & FEATURES: Operating voltage: 400 V Frequency: 50 Hz Rated current: 32 A Including feed system and coolant system NOTES ON COLLECTION: Collection must definitively take place between December 10 and 12 Ltjdpfx Afjxm Tqmsfsa FCA Winterlingen, loaded onto truck

Condition: excellent (used), Year of construction: 2013, Siemens Sinumerik 840D control Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper band filter Centre tip Diamond dressing plate Ltedpfowwtq Dsx Affja Grinding wheel change assist