Disk grinding & polishing machine

METKON Forcipol 102 (optional Forcimat)

Year of construction: 2023, Condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes Znf9Jlgt • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: excellent (used), PART NUMBER 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm 8Iw2Zkkp90 - outlet for shredded wood fi 160mm - working width of rotor 580mm - main motor 18,5kW - pump motor 0,75kW - number of knives 14pcs - dimension of knife 30x30mm - sieve 15mm x 20mm - pressure drawer - electric auto-reverse - dimensions L/W/H 2000x1130x1530mm - weight 970kg ATTRIBUTES - made in Germany - autoreverse - push drawer - very good condition - used chipper Net price: 47 900 zł Net price: 10880 EUR Net price converted at 4.4 PLN/EUR exchange rate (with major exchange rate fluctuations, price may change)

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant 0K2Cdl Option: Machine base cabinet

Condition: like new (used), Сompressor technical data: Power, cubic meters 10,2 Max. pressure, atm 10 Power, kW 75 Overall dimensions., Mm 1610x850x1355 2Twvvm Weight, kg 1050 Air dryer technical data: Working pressure, bar 17 Maximum pressure, bar 22 Operating temperature, ° C 36 Power, kW 5,45 The amount of charge, kg 3,97

Year of construction: 2023, Condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system Bfdm9Ema - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: good (used), fuel pump, supercharger carburettor Izo32Kq -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Condition: excellent (used), Year of construction: 2001, CATALOGUE NUMBER 7089 TECHNICAL DATA - loading hopper inlet 1020x1230mm - rotor working width 1020mm - rotor diameter 348mm - main engine 22kW, 400V, 50Hz - pump engine 0.75kW - number of knives 50pcs - knife dimensions 35x35x20mm - sieve 12mm - pressure drawer - electric auto reverse - dimensions l/w/h 2000x1130x1530mm - weight 970kg ADVANTAGES Bbcronyejjn - auto reverse - like WEIMA WL 10 - German production - pressure drawer - very good condition - used chipper, DTR+CE documentation Net price: PLN 122,900 Net price: 27930 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 2001, Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 2 complete/3 incomplete, ink tanks: 4x Inkcan, ink pump: 4x pneumatic, window unit: traditional punching knives and adhesive paper. Including top and bottom scriber, time lubrication unit, latex and dextrin capping, infrared drying, electronic counter and monitoring. Dqmr3T

Mileage: 332,556 km, power: 158 kW (214.82 HP), first registration: 10/2016, fuel type: diesel, color: other, axe configuration: 4x2, tire size: 245/70 R17.5, fuel: diesel, wheelbase: 3,800 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Condition: used, Equipment: ABS, air conditioning, cruise control, = Further options and accessories = - Windows with electric operating device - Fog lights - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer - Central door locking = Further information = General information Cabin: single License plate number: 20-BHS-7 Technical information Number of cylinders: 4 Engine displacement: 5,132 cc Axle configuration Tire size: 245/70 R17.5 Cguejlrp8A Brakes: Disc brakes Front axle: Max. Axle load: 7245 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: Leaf suspension Rear axle: Max. Axle load: 11500 kg; Tire tread left: 20%; Tire tread right: 20%; Suspension: Air suspension Dimensions Dimensions (L x W): 716 x 232 cm Weights Unladen weight: 6,695 kg Payload: 5,295 kg GVW: 11,990 kg Maintenance APK (technical main inspection): tested until 10.2025 Condition General condition: very good Technical condition: very good Visual condition: very good Damage: none

Condition: good (used), total length: 1,030 mm, total width: 900 mm, total height: 1,400 mm, table length: 900 mm, table width: 720 mm, power: 1.47 kW (2.00 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, The machine is cleaned and working. Motor 2 HP 380V 1500 rpm B9Ea3Fm7Z3

Year of construction: 2007, Condition: excellent (used), 1 x EVG Mesh Welding plant, Type GE 12/102-PV, year of production 2005, installed in 2006 For production of standard reinforcing mesh with line wire spacing of 100 mm and multiples. Working with line wires off vertical pay-off and pre-straightened and cut-to-length cross wires off a magazine. BASIC DATA: Max welding width: 2600 mm Max cross wire length: 2750 mm Min mesh width: 1200 mm Max. mesh length: 7000 mm Min. mesh length: 1000 mm Line wire diameter off coil: 4 – 8 mm (at 100 mm line wire spacing) 4-10 mm (at 150 mm line wire spacing) Cross wire diameter: 4 – 10 mm pre-straightened and cut Line wire spacing: 100 mm and multiples Cross wire spacing: 50 mm , larger steps infinitely programmable 2 x Invert vertical type drawing ,machine (Cheng I machinery, Taiwan), year of production 2007 Model: IVD-800 (ribbing model) Inlet wire: 10 – 6 mm, low carbon wire Motor: 100 HP, AC motor with inverter (Brand TECO) Dia. Of the drum: 800 mm, made of alloy cast iron, the wire drawing zone (220 mm high) is made of tungsten carbide coating Speed: 0 – 150 m/min. Cooling system: both inside drum and die are water cooling Spooler: with 3 HP AC motor with inverter, coils 0 – 1500 kg Bzrt2Ycbsi 1 x Wafios, fully electronic wire straightening and cutting-off machine, model R 43, year of production, 2007 2 pairs of separate driven feed rolls, frequency regulated, pneumatically open and close. Separate driven rotary body straightener, frequency regulated. Stationary shear, servo motor driven. Change over time: 1 – 3 minutes Length tolerance: +/- 0,3 mm, depending on wire size, wire quality, condition of coil and pay of . Collecting station - 3 m

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block R9Wybuz -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 86 mm / 90° -Dimensions: see photo technical drawing -Number: 2x prisms -Price: per piece -Dimensions: 300/102/H69 mm -Weight: 8.4 kg/piece

Year of construction: 2006, Condition: excellent (used), BOY 90A (102) without hopper General information Product Code: 102 Availability: In Stock Year of production: 2006 Brand: Boy Technical data Shot Weight: 193 g Clamping Force: 900 kN Screw dia: 42 mm Injection pressure: 1724 bar Tie bar distance: 430x360 mm Platen size: 635x610 mm Mould height min.: 250 mm Type of controls: Procan CT Language: German Befydb3M Power: 26,3 kW Workinghours: 15070 h Weight: 3100 kg Dimensions: 4,9x1,2x2,1 m Hopper: No

Condition: ready for operation (used), Year of construction: 1993, Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 5+0 or 4+1 Doctor Blade, ink tanks: 4x Inkcan, ink pump: 4x Pneumatic, window unit: traditional punching knives and adhesive paper. Includes Top and bottom scriber, time lubrication unit, latex and dextrin sealing, infrared drying, electronic counter and monitoring. Bn8Kpdsiyit

Condition: excellent (used), Year of construction: 2012, Mesh welding line EVG model ATT 10/102 M88Ockqhq Please see attached document.

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg S7Qnufd

Condition: good (used), Year of construction: 1999, Functionality: fully functional, FULLY AUTOMATIC - Mesh welding line EVG GD6 Construction year – 1999. The line was refurbished in 2015. Production is stopped at the end of 2020. Available complete documentation. Spools are not included. Line wire pull-off system for 2 x 16 = 32 horizontal spools (spools by client) Line wire destressing unit DE 45/102 Line wire advance system TL RVD including pull-out and balancing device Cross wire advance system TQD 3000V Cross wire spool system SQ2 (2 pieces of spools) Welding machine EVG GD6-H: B9T8Fned Working range: Number of line wires 20 Line wire diameter 3.3 – 10.0mm Cross wire diameter 3.3 – 10.0mm Cross wire spacing, steplessly adjustable from 100/150/200/250/300mm Line wire spacing (setting at delivery 100mm) 100/150/200/250/300mm Max. distance between outer line wires 2500mm Max. width of wire mesh 2400mm Technical data: (as equipped) Connection voltage (three-phase current) 50 Hz Nominal rating at 50% duty cycle 3 phase 1400 kVA Drive capacity 162 kW Number of transformers at 50% duty cycle 10 at 140 kVA Cooling water 150 l/min Line wire shear MD 35/102 Automatic mesh turning and stacking T 60/102 unit for max. 6 m Connecting roller conveyor Control unit, Siemens Simatic S7 – NEW

Condition: ready for operation (used), Indramat TRK3-W22-EO/102 - TRK3-W22-EO / 102 3 pulse thyr. control amplifier, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Id3Sshbb

Condition: ready for operation (used), Indramat TRK3-W22-EO/102 - TRK3-W22-EO / 102 3 pulse thyr. control amplifier, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos 00Mu8

Condition: ready for operation (used), Siemens 6ES5102-8MA01 CPU 102 central module, serial no. according to photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Please ask for price separately Bfz2H7Ets

Condition: ready for operation (used), Bosch 10700688-102 Servo i Module Circuit Board , SN:001453948 ,used, small traces of use, 100% functional, scope of delivery according to photos Cj3Zngrvf0

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Cj7Wxcv8Ef

Condition: ready for operation (used), Siemens 6FC5210-0DA20-0AA1 MMC 102 , used, 100% functional Izv8Rt0F

Condition: new, Siemens 6FC5210-0DA20-0AA1 MMC 102 , unused, in opened original box, 100% functional Rjjkl

Condition: new, Leuze BCL 501iSF 102 Stationary barcode reader 50105484 10 - 30 V DC V 1 . 5 . 19 < unused > 100 % functional Bh3Enyf