Used Great Cnc Milling for sale (16,080)

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm Isdpfxsfbma Ne Ah Neht -Weight: 1966 kg

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm Iodswyivnepfx Ah Noht -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges Ihedpjxcgtgsfx Ah Nst - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Ihsdpfx Ahjfg Ep De Not Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Iodpfoglf A Hex Ah Noht Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC long turning lathe Doosan Puma St20G Year of manufacture 2012 Bar feeder FMB turbo 3-26 Chip conveyor Ihodpfxowtg Dij Ah Nst

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Max. turning 540 mm dia. Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: PC Fusion 640 MT Equipped with: Gantry loader Ihodjp Ui N Hepfx Ah Net 10 pcs. tool holders

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Iedpfx Ajl Dvx Ejh Neht Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 1999, Turning length 1575 mm X 450 mm Y +/- 90 mm Z 1575 mm Max. swing 510 mm Max. turning diameter 400 mm Spindle bore 76 mm Isdpfxjuimaxe Ah Neht Spindle speeds 3000 rpm on main spindle Spindle speeds 6000 rpm on mill spindle Tool changer w/ 40 stations Hydraulic tailstock Control: Mazatrol Pc Fusion 640 MT Equipped with: Hydraulic 3-jaw chuck Chip conveyor App. 20 holders for turning

Condition: used, Year of construction: 2020, operating hours: 4,500 h, functionality: fully functional, For Sale: HAAS ST-35Y CNC Lathe with Y-Axis We offer a HAAS ST-35Y CNC turning center in good working condition, designed for heavy-duty and high-precision turning operations. Key features: + Y-axis for off-center milling and complex machining + Live tooling + Large turning capacity + Rigid construction suitable for demanding parts + Reliable HAAS control, easy to operate and program + Well maintained and regularly serviced Typical applications: + Large diameter components + Flanges and shafts + Hydraulic and industrial parts + Low to medium volume production Machine condition: Fully functional, under power, available for inspection. Quantity: 1 machine Isdpfx Ajx Tgbbeh Njht Location: Europe Availability: Immediately / upon agreement Price and detailed technical specifications available on request.

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Ihjdpfx Asu Ibihoh Njt

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Ihjdpfx Ajwzx Ntoh Net Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: excellent (used), Brand : SORALUCE Model : TR- 25 Cnc : HEINDENHAIN iTNC 530 Work table : 2860 x 1200 mm X Axis travel : 2500 mm Y Axis travel : 1600 mm Z Axis travel : 1200 mm Spindle speed: 20-3000 rpm Tool taper : ISO 50 Maximum torque : 700 Nrm Spindle motor : 32 kw Feed range : 2- 10 m/min Rapid traverse: 25 m/min Machine weight : 25 tn NC Rotary table (4th axis) YRT F 1000/1250 Iodpfx Ajx Rv D Hsh Noht Maximum load: 3500 kg Overall height : 265 mm Table top thickness: 125 mm Partial accuracy : ±2,5 Equipped with: Electronica handwheel Automatic universal milling head: ±2,5° Cooling through the spindle Coolant device with paper band filter Chip conveyor Working hours : Machine running: 34.320 h Control on: 23.218 h Automatic cycle: 11.987 h

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC turning center Hardinge Conquest 51T, low hours, year of manufacture 2021, inspection/test run possible at any time Ihedpfx Ajwtplcoh Net

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l Ihjdpfx Aotvfpcjh Nst _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,427 h, functionality: fully functional, turning length: 500 mm, turning diameter: 380 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, torque: 465 Nm, bar passage: 80 mm, workpiece weight (max.): 400 kg, total height: 1,857 mm, total length: 6,650 mm, total width: 1,845 mm, bar diameter (max.): 80 mm, overall weight: 5,950 kg, Equipment: documentation/manual, Mazak QUICK TURN 250MSY – Complete Package incl. Bar Feeder – As New (Year 2024) Description & Reason for Sale: For sale is a cutting-edge Mazak QT 250MSY (built at the end of 2024) in absolutely full-spec configuration. The machine is optimized for automated complete machining from bar stock and comes with an extensive, high-quality package of tooling and clamping devices. After commissioning, we decided to sell the machine as the control system’s operating concept differs too much from the rest of our machine inventory and does not ideally fit our internal programming workflow. Since we are aiming for a unified operating concept, this powerhouse is now available for immediate sale. The Mazak is currently still integrated into our production. Please note that operating hours may slightly change before the sale date. Inspection under power and in operation is possible on short notice by appointment. Technical Highlights: - Control: MAZATROL SmoothG (19" touchscreen) with Intelligent Safety Shield & collision protection - Working area: Max. turning diameter 380 mm, turning length 500 mm, Y-axis travel 100 mm - Main spindle: 26 kW, max. 4,000 rpm, C-axis (0.0001°), spindle bore 91 mm - Sub spindle: 11 kW, max. 6,000 rpm, for fully automatic rear-side machining - Turret: 12 stations (VDI), all live (5.5 kW, 6,000 rpm) Ijdpjx Tcttefx Ah Njht - Dynamics: Rapid traverse X/Y/Z: 30 / 10 / 33 m/min Included Accessories & Automation: - Bar feeder: TOP Automazioni (Magic) short bar loader - Clamping devices: 10” 3-jaw power chuck (main spindle), collet chuck system (main spindle), collets Ø (25, 35, 40, 45, 50, 60, 65, 75, 80) - Various draw tubes and adapters for different diameters (16, 17, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71, 76) - Tool package: Mazak standard holder package - Driven WTO angular head for main and sub spindle - 4-position tool holder, drill holder (main/sub), and 4-position boring bar holder - Additional options: Tool Eye (automatic tool measuring), parts catcher, 15 bar high-pressure coolant, Mayfran chip conveyor (side discharge), and engraving function Technical Data: - Year of manufacture: End of 2024 - Max. turning diameter: 380 mm - Max. turning length: 500 mm - Spindle bore: 80 mm (bar) - Main spindle power: 26 kW - Torque: 465 Nm - Weight: approx. 5,950 kg - Dimensions: 6650 x 1,845 x 1,857 mm (incl. bar feeder & chip conveyor)

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Ihjdpfx Aoxtu H Nsh Njt Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2025, CORMAK C2131 ATC PREMIUM (2100 x 3100 mm) is a dynamic and precise milling plotter based on components from world manufacturers, suitable for the heaviest tasks, which is perfect for industrial-scale production. Constant quality control and the components used in the machine's construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Ihsdsvupcrjpfx Ah Nst Sectioning table with FOUR independent vacuum sections, made of stiff and durable HPL plates, Each section has holes to which negative pressure from a vacuum pump is supplied through a pipe system, The main holes in the vacuum table have caps that allow you to attach various formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . 3.Drive Energy-saving high-class drives Leadshine servo drives with 1500W power and high holding torque (Dual on the Y axis) controlled by the NK-105 G3 digital controller ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power through high-class planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The gate is moved along the X and Y axes using HIWIN guide strips and helical toothed gears, which guarantee many years of failure-free operation and are made of high-quality, hardened and hardened steel. 4. Construction The structure of the sliding gate is made of cast iron, which achieves incredible stiffness and absorbs vibrations generated during processing very well. 5. Magazine for 8 tools + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 bushings The set includes holders: ISO30 and sleeves for mounting tools with dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. Each CNC milling machine is equipped with a precise Z-axis tool height sensor, which eliminates time for measurement corrections after each tool change. 6. Vacuum pump and extraction foot The use of a vacuum pump significantly increases the clamping force of the processed details on the machine table, thanks to which the material does not move. 4 independent vacuum sections. Technical parameters Workspace 2100x3100mm Z axis 300mm Construction Arm - cast iron / table - welded steel Drives Leadshine servo drives with a power of 1500W Table tee/hybrid Spindle power 9 kW Spindle Air-cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin bogies Fixing the material vacuum, hybrid Pump vacuum 2x7.5 kW (optional) Software UCanCAM V12 in Polish language version Dimensions 4070 x 2870 x 1900 mm Weight 2050 kg

Condition: new, Year of construction: 2025, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor Ihsdsvup Unepfx Ah Njt The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Software (optional) UCanCAM V12

Condition: new, Year of construction: 2025, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Ihjdpeiz S Haofx Ah Not Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: new, Year of construction: 2025, The CORMAK NST2131-16D LOADING/UNLOADING CNC milling machine machining center was created for companies that prioritize high processing power, economic efficiency and machine reliability. This automatic nesting center offers huge possibilities, especially in its most popular version, equipped with an innovative storage and pushing unit, enabling smooth loading and unloading of boards with a full working area and effective collection of finished elements on a specially adapted table. Thanks to the use of a reinforced structure and solid components, the CORMAK CNC Router is able to cut several boards simultaneously in one cycle, ensuring continuous production even in the case of heavy loads. The attributes of this advanced machine include those ensuring precise and very fast processing of materials: Iedpown Dz Iofx Ah Njht pneumatic pins, strips and actuators ensuring automatic plate basing efficient milling unit intelligent quick selection of tools from the 12-piece "revolver" type magazine LCD control panel with industrial control software included Siemens, Schneider and Phoenix electronics feeder and receiver table - ADDITIONALLY PAID OPTION In addition, the center is equipped with an advanced nesting algorithm and tool path optimization, which allows for flexible production and efficient use of materials. The vacuum chip extraction system and the central lubrication system ensure not only cleanliness and safety of work, but also long-term reliability of the machine. Overall, the CORMAK NST2131-16D CNC milling machine machining center is an ideal solution for companies looking for efficient, reliable and versatile machines for processing materials, capable of meeting even the most demanding industrial productions. Technical parameters Field Working 2100x3100 mm Z axis 300 mm INOVANCE servo drives (1.3kw for XY, 850w for Z-axis), with planetary gear Spindle power 9 kW HQD air-cooled spindle (optional oil mist) Spindle speed from 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Re-positioning accuracy 0.01 mm Linear bearings trapezoidal rails, Hiwin carriages Vacuum, hybrid material clamping Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Equipment HQD spindle air cooled, Premium version Tool measurement sensor included Tools, sleeve set, leveling feet and other accessories

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) Iodsiz Avvjpfx Ah Nsht ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, The CNC milling machine CORMAK NST2131129A LOADING/UNLOADING was created for companies that prioritize high processing power, economic efficiency and machine reliability. This automatic nesting center offers huge possibilities, especially in its most popular version, equipped with an innovative storage and pushing unit, enabling smooth loading and unloading of boards with a full working area and effective collection of finished elements on a specially adapted table. The CNC router CORMAK is able to cut several boards simultaneously in one cycle, ensuring continuous production even in the case of heavy loads. The attributes of this advanced machine include those ensuring precise and very fast processing of materials: Automatic loading and unloading system through specially designed suction cups and its transfer with automatic homing to the horizontal drilling zone Intelligent quick selection of tools from the "revolver" magazine of 12 pieces Efficient 2 drilling units and HQD and HSD spindles (industrial spindles on ceramic bearings Pneumatic homing pins, LCD control panel with control software included Large protective cover With extendable pins for locating the processed material - 6 pieces Electronics from Siemens, Schneider and Phoenix Feeder and unloader table Additionally, the center is equipped with an advanced nesting algorithm and tool path optimization, which enables flexible production and efficient use of materials. The vacuum chip extraction system and the central lubrication system ensure not only cleanliness and safety of work, but also long-term reliability machines. In general, the CORMAK NST2131129A CNC milling machine machining center is the ideal solution for companies looking for efficient, reliable and versatile machines for processing materials. Technical parameters Working area 2100x3100 mm Z axis 300 mm Construction: Arm - cast iron / table - welded steel 12-piece umbrella-type tool magazine, ISO30 standard Tool length measurement sensor XYZ axis automatic lubrication system INOVANCE servo drives (1.3kw for XY, 850w for Z-axis), with planetary gear Table - T-shaped / hybrid / feeding and receiving Two-layer, multi-hole, vacuum bakelite work table with rubbers and mounting screws, with positioning system 9 kW spindle power HQD air-cooled spindle (optional oil mist) Spindle speed from 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Repositioning accuracy 0.01 mm Linear bearings trapezoidal rails, Hiwin trolleys Vacuum, hybrid material fixing Ihsdpeunw N Ajfx Ah Njt Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Optional equipment - paid: Vacuum pump: e.g. Becker KVT 5.5kW or 7.5kW Top-class safety barriers The latest UCanCAM V12 software Possibility to add oil mist

Condition: new, Year of construction: 2025, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which works great in industrial production. Constant quality control and components used in the machine construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with four independent vacuum sections, made of rigid and durable HPL boards, Each section has holes to which negative pressure from the vacuum pump is supplied through a system of pipes, The main holes in the vacuum table have plugs that allow you to attach different formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . Adapted to automatic tool changing, which shortens machining time due to the lack of downtime associated with manual cutter change. 3.Drive Energy-saving high-end drives Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) controlled by the NK-105 G3 digital controller , they ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power via high-quality planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The movement of the gate along the X and Y axes is carried out by means of HIWIN guide rails and helical gear wheels, which guarantee many years of trouble-free operation and are made of high-quality hardened and tempered steel. 4. Construction The construction of the sliding gate is made of cast iron, which achieves incredible rigidity and absorbs vibrations generated during processing very well. 5. 8-tool magazine + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 collets The set includes holders: ISO30 and sleeves for mounting tools in the following dimensions: Ihedpfxjvupu Uj Ah Nst 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs.; 5-6mm - 4 pcs.; 7-8mm - 2 pcs.; 9-10mm - 2 pcs. 6. Vacuum pump and suction foot (optional) 4 independent vacuum sections. The pneumatically operated extraction foot is located at the spindle and allows for the connection of any chip extraction system, maintaining the cleanliness of the processing, safety and at the same time maintaining the precision of the work. 7. Software, INDUSTRIAL CONTROL : Control NK-105 G3 The machine supports the latest version of CAD/CAM software. OPTIONALLY The latest UCanCAM V12 software Technical parameters Working Field 2100x4200mm Z-axis 300mm Design Arm - cast iron / table - welded steel Drives 1500W Leadshine servo drives Table T-shaped / hybrid Spindle power 9kW Spindle Air cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin trolleys Material fixing vacuum, hybrid Vacuum pump vacuum 2x7.5 kW (option) Software UCanCAM V12 (option) Dimensions 5070x2870x1900mm Weight 3350 kg

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Ihsdevupr Tspfx Ah Net Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives