Used Grease for sale (557)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Ledpfx Aoy R Nnfeiisrn Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Year of construction: 2013, condition: used, functionality: fully functional, This is a combination steamer SCC 101 from the premium manufacturer Rational, in an electric version. This combination steamer is equipped with a racking system with 10 trays. The unit has been fully refurbished in our in-house workshop, is fully functional, and comes with a 6-month warranty on all electrical parts. The base pictured is not included in the offer but can be purchased separately as an option. You will receive an invoice with VAT shown. These are example images; actual images will follow shortly. The combination steamer is available from approximately week 28. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steamer offers space for 10 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 1042 mm Power connection: V: 400 / kW: 18.6 / Hz: 50/60 Capacity: 10x1/1 GN Weight: approx. 135 kg Serial number: E11SH13072358148 Year of manufacture: 2013 Condition: used, refurbished, fully functional Further details: With care Control - self-cleaning function In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Core temperature probe Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Moistening adjustable in 3 levels - from 30°C to 260°C 5 programmable proofing levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 am to 1:00 pm and from 2:00 pm to 5:00 pm. Lredpfxozgcmqs Aiisn The sale is exclusively subject to our general terms and conditions (GTC).

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00594, load capacity: 270 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/270F manufactured in 2016.10. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/270F Model Number: A05B-1337-B201 Year of Manufacture Robot: 2016.10 Warranty term (months): 12   Payload (kg): 270 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 Lrsdpfx Ajzf Urceiijn RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00601, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2017.04. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2017.04 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Lsdpfx Aijzf Uq Seiorn Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00602, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Ljdpfszf Uq Eex Aiijrn Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00606, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR Mate 200iD/7L manufactured in 2016.01. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD/7L Lrodpszf Uqlofx Aiion Model Number: A05B-1142-B301 Year of Manufacture Robot: 2016.01 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 911 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 27   Controller: R-30iB Mate Year of Manufacture Cabinet: 2016.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00622, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA/20M manufactured in 2017.12. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Ljdozf Iw Sjpfx Aiisrn Model: M-20iA/20M Model Number: A05B-1222-B702 Year of Manufacture Robot: 2017.12 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1813 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2017.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: good (used), The is machine can transfer thick material accurately and at speed. Products such as mashed potato, grease, jelly, creams, paste, mayonnaise etc. Lodpfjqnwq Eox Aiisrn

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Lsdpfxjwqx H Re Aiiern Very good condition

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm internal dia. - min. 100 mm internal dia. - max. 300 mm Maximum permissible peeling wheel diameter 175 mm Diameter of the installation area 125 mm slide travel X-axis 350 mm slide travel Z-axis 300 mm slide travel Z-axis 440 mm Largest swivel range of the peeling head ±25 Grad workpiece table outer diameter 570 mm Workpiece table – Maximum permissible load 5 kN Feed - X 12000 mm/min Feed - Y 5000 mm/min Feed - Z 8570 mm/min Tools speed 0-3000 U/min Workpiece table speed 0-1500 U/min voltage 400 V weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Lredpfx Aiozfqikjisn Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00555, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Lrsdpfx Aiozfgq Reion Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, power: 121 kW (164.51 HP), fuel type: diesel, Year of construction: 2021, operating hours: 7,166 h, Make of engine: Cummins Top speed: 40 km/h Lsdpszg Ag Dsfx Aiiern Production country: UK Please contact Kristoff Van Havere for more information - Hydraulic quick hitch - Bucket - Auxiliary piping - Central grease system - Reversable fan

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 3,090 h, Field of application: Construction Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW10 - 2 buckets - Auxiliary piping for hammer and sorting grab - High flow version Ljdpfx Aijzg Agwjiern - Central grease system

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,545 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty Container Reachstacker Transmission: Dana TE17300 Condition: Ready for operation and fully functional Technical condition: good Front tyre size: 14.00-24 Rear tyre size: 14.00-24 Ledjy S Hbxopfx Aiijrn EN: Central greasing system, rear view camera, air-suspended driver's seat

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Year of construction: 2025, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an extremely reliable and versatile commercial vehicle, designed to perform in demanding conditions. This truck is suitable for use as a mobile workshop, maintenance vehicle or support vehicle in various difficult-to-reach areas. Key Elements: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 hp (180 kW), the Atego 1725 A provides sufficient power for off-road operations and heavy duty work. Lsdpfxjy Rucze Aiisrn - DRIVELINE : With permanent four-wheel drive, high ground clearance and robust suspension, this truck arrives on site regardless of the terrain. - OFF ROAD TIRES : With these off-road tires, the Atego 1725 can ensure that you arrive on location without any problems. Thanks to the 4x4 drivetrain, no terrain is too rough. Superstructure : Service Truck A service truck offers a fully equipped mobile workshop with tools such as: - Power supply / Lighting - 24v system connected to the vehicle battery. - 4 ceiling lights 230V (LED) - 2 ceiling lights 24V (LED) (connected to vehicle battery) - 2 sockets 230V / 16A - 2 sockets 400V / 16A and much more, ask our sales for more info! Lubricate / Pump equipment - 4 pneumatic oil pumps equipped with (4) 10M hoses, (4) digital meters on oil dispenser - 1 pneumatic waste oil pump equipped with (1) 10M hose (1) and oil dispenser - 1 pneumatic grease pump equipped with (1) 12M hose (1) grease dispenser - 1 electric water pump (Einhell) with (1) 10M hose and water dispenser - 3 units of ''Silver filler Breathers'' with mesh for water. Coolant, old oil tanks - High pressure washer Karcher (or similar) - Compressor ABAC 3PK 400V/230V with air spray, air hose 10M Tanks: - Water tank capacity 600L MAX. - Diesel tank capacity 1000L MAX. with 24V pump hose is 15M with digital meter for liters - Old oil tank capacity 900L MAX. Tools: - Power generator (Hyundai DHY12000XSET 11.4KvA 400V / 9kw 230V 30L 50Hz 72DB) - 1 portable headlamp – 5M - Barrelwrench type 1 and 2 - Extension cable - 25M - Vise / vice 100MM - Tool box filled 30+ parts - 2 tool chests with drawers, cabinet, and doors with lock. Other accessories: - Mud screens - Work lamp - First aid kit - Water tank 30L for washing hands - Anchor points for securing cargo - Fire extinguisher - Welding equipment 1 welding cable with holder 10M, welding helmet, leather gloves - 500KG electric winch 230V - manual jack The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an excellent choice for professionals in: - Mining: Reliable transportation and support in harsh environments. - Oil and gas industry: Maintenance and repair in remote locations. - Agriculture: Efficient service in difficult areas. - Infrastructure projects: Support of construction and maintenance activities. - Humanitarian missions: deployability for relief efforts in remote or disaster areas. = More information = ...

Condition: reconditioned (used), Year of construction: 2015, operating hours: 758 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 228 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB430 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 Only 758 hours on the machine! 430mm cleaning head (TB430) equipped with a new medium-hard disc brush for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~228 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger Lrjdjzgwaljpfx Aiien 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, Year of construction: 2025, HARDLINE MACHINING CENTER WORKING AREA 1300X1500MM. Z-AXIS WORKING RANGE 300MM OMRON SERVO AC HIGH SPEED DRIVES 1.5kW T-SLOT TABLE FOR M10 MOUNTINGS - MADE OF SOLID STEEL OSAI OPENSMART INDUSTRIAL REAL-TIME CONTROL SYSTEM, ETHERCAT COMMUNICATION EUCHNER HBA-103037 MANUAL MANIPULATOR CONTROL CABINET AIR CONDITIONING Ljdpfx Aeu U Hh Tsiijrn HSD MAX18KW S6 ES789L ELECTRIC SPINDLE KIT - H6161H1501– ATC, UP TO 24,000 RPM ENCODER FOR ATC HSD ELECTRIC SPINDLE ACTIVE COOLING SYSTEM - CW-6000 CHILLER 12-POSITION LINEAR MAGAZINE TOOL LENGTH SENSOR RENISHAW TS27R TOOL MEASURING PROBE TOOL PRESENCE SENSOR PREMIUM COOLING MIST FREEZE NOZZLE SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) Option for threading and drilling in aluminum and steel

Condition: new, Year of construction: 2026, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Speed ​​of travel up to 60 m/min Lsdpsvyrgqefx Aiijrn Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: reconditioned (used), Year of construction: 2015, operating hours: 707 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 228 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB430 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2015 Only 707 hours on the machine! The 430mm cleaning head (TB430) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~228 Lodpfx Aiozgvraoiorn Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, Year of construction: 2025, functionality: fully functional, 5 AXIS Machining Center 2131 X, Y, 2100 X 3100MM MOVEMENT RANGE Z AXIS RANGE 1000 MM FOR 5 AXIS HEAVY MACHINES HITECO 17KW S6 TILTING/ROTATION HEAD KIT AXIS RANGE A= +- 185°, C= +- 320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 OMRON AC SERVO DRIVE KIT OSAI OPENKEY INDUSTRIAL REAL TIME CONTROL SYSTEM EUCHNER HBA-103037 MANUAL MANIPULATOR CONTROL CABINET AIR CONDITIONING Lrsdpfxsu U Hmps Aiien LINEAR MAGAZINE 18 POSITION 16 POSITION HSK63F TURRET MAGAZINE CORRECTION MAP RENISHAW TS27R TOOL MEASURING PROBE SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,519 h, functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 730 kg, warranty duration: 12 months, water tank capacity: 120 l, HAKO SCRUBMASTER B120 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 with 1519 hours on the clock 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 120/120 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 730 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Lsdpfx Aijzgu Nksiorn KEY FEATURES: The 120-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 532 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 Only 532 hours on the machine! The 510mm cleaning head (TB510) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive. Lrodpfxozguhae Aiion

Condition: reconditioned (used), Year of construction: 2015, operating hours: 1,628 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2015 with 1628 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Lredpfx Aiezgt Hhoion The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: ready for operation (used), Tecalemit TX34221 YD grease pump / central lubrication system with manual lever – 2.85 liter tank capacity, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdozd I E Hjpfx Aiiern

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Lrsdpfx Aiszd H Uaeisn Safety features: - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.