Used Glass Saw for sale (9,949)

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Bjdpfx Absu Nhiqo Tolr Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 02/2009, - thickness of glass - from 3 to 12 mm, - maximum glass format 6100x3300 mm, - working height 950 mm +/- 30mm. ( adapted to the line), - overall dimensions (length x width x height) 8500x4300x1700 mm, - feed speed on belts up to 40 m/min, - glass feed speed on the cushion up to 40 m/min, - power supply voltage - 400V, 50Hz, - total installed power - 10 kW, - compressed air supply with a pressure of 7 bar, - maximum air consumption of 1100 NL/min, - glass presence sensor - OK. - automatic positioning of the glass sheet - OK. - RAL color - according to the order, - outer edges of the table made of hard wood, - table top covered with black felt with a thickness of 4mm, - guide and drive system protected against dirt, - guides and gear rails surface hardened, - on the bridge was mounted glass transport suckers, Bsdsvdaf Aspfx Ab Tjlr - on the bridge mounted stop buffers for manual cutting of glass. - the table has a solid frame construction, - the table is equipped with a system of sensors (electronic and mechanical), - top of the attachment covered with black felt with a thickness of 4mm, - oil during cutting dispensed automatically to both wheels simultaneously. - double-sided cutting, - breaking of the upper cut - breaking roller, - breaking of the bottom cut - breaking bar, - sheet separation - cutting knife, - adjustable parameters heating time; separation time, cutting delay - they depend on the thickness of the cut VSG. - heating of the cutting place - a set of radiators - max thickness of VSG glass - not exceeding 12mm in total, - max width of cutting 4000mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 1500 x 47000 mm, - glass transport speed - adapted to the table - total installed power ~ 17kW - supply voltage - 400V, 50Hz - compressed air supply with a pressure of 7 bar, - manual and automatic cutting function, IV. basic technical data of glass breaking station type.GS6-3/2 - the table has a solid frame construction, - the table has an air cushion to facilitate the movement of glass, - control of breakers and fan is done by pedals, - glass thickness from 3 to 12 mm, - max glass size 3300 x 6100 mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 3600 x 6000 mm,

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery Blodeb Rnv Sopfx Ab Tor cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Bljdpfxjv D Naps Ab Ter Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Bjdotqmvrepfx Ab Tslr

Condition: used, functionality: fully functional, tank capacity: 1,000 l, The Glass VSM/F 1000 is a versatile vacuum mixer that optimizes the processing of meat, fish, fine foods, fruits, and vegetables. Thanks to its vacuum technology, it not only blends but also massages products, improving their texture and quality. Indeed, this mixer is ideal for operations requiring the use of nitrogen or direct steam injection. It also features a mixing arm with a scraper and an electric tilting system, facilitating product unloading. Furthermore, its pneumatic lid ensures safe and efficient operation. Furthermore, the Glass VSM/F 1000 offers a large processing capacity, making it ideal for companies looking to increase productivity. Thanks to its advanced features, it guarantees homogeneous mixing and optimal food preservation. Furthermore, its ergonomic design facilitates cleaning and maintenance, reducing downtime. In short, this vacuum mixer is an essential asset for improving the quality and efficiency of production processes in the food industry. Blsdpfx Aju Iafnjb Tjr SPECIFICATIONS: Power: 5.93 kW Current: 13.74 A Voltage: 400 V; 50 Hz Volume: 1000 L Mj+KikOw

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Blodpfoumb Hiex Ab Ter

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height Bjdpjv Rr E Iofx Ab Tjlr 2500 mm Weight 2500 kg Manufactured by Glass

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Bodpfx Absd H Hmhs Telr Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-341-07-8150, cutting length (max.): 4,300 mm, saw blade diameter: 380 mm, cutting width (max.): 3,800 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Front panel loading Front-side unloading Blodpfx Abjxx Svro Ter Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 3,100 mm, cutting height (max.): 1,640 mm, cutting depth: 60 mm, rotational speed (max.): 5,250 rpm, The machine has been completely overhauled. New spare parts worth €4,500 have been installed! TECHNICAL DETAILS Cutting capacity Length: 3,100 mm Bledpfxsxyi Dio Ab Tjr Vertical cutting height: 1,640 mm Horizontal cutting height: 1,532 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Bore: 30 mm Speed: 5,250 rpm MACHINE DETAILS Motor power: 3.9 kW Electrical connection: 3 × 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1832.14, feed rate X-axis: 60 m/min, cutting height (max.): 160 mm, cutting width (max.): 360 mm, total length: 1,300 mm, total width: 1,300 mm, TECHNICAL DETAILS Max. cutting height: 160 mm Max. cutting width: 360 mm Bsdpfx Asx Ahc Asb Tjlr Max. feed speed: 60 m/min MACHINE DETAILS Machine dimensions (L x W x H): 1,300 x 1,300 x 1,700 mm Infeed table dimensions (L x W x H): 7,600 x 2,000 x 1,100 mm Outfeed table dimensions (L x W x H): 6,300 x 2,100 x 1,050 mm EQUIPMENT Under-table cross-cut saw Automatic feed

Year of construction: 2020, condition: ready for operation (used), Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm Bjdpfox A I E Rjx Ab Tjlr This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Bsdsw Sygmepfx Ab Tslr weight of the machine ca. 1,4 t

Condition: good (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS Bledpfx Asx A H T Hsb Tsr total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: Blsdpfxsx A H Rrs Ab Tsr • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: excellent (used), Catalogue number 7698 TECHNICAL DATA - Track width: 300mm Blodpfewya Nfex Ab Tor - Working width of shaft: 370mm - Max blade diameter: 300mm - Blade bore diameter: 70mm - Max cutting height: 120mm - Table width with extension: 750mm - Table length with extension: 1530mm * From above: - Pawls/kickers - Metal pressure idler roller - Metal pressure roller - Shaft with saws - 2 smooth metal idler rollers, pressure * From below: - Guide bar - Pawls/kickers - Track - Central lubrication of track - Stepless feed speed adjustment - Main motor: 15.5kW - Extraction port diameter: 150mm - Overall dimensions (LxWxH): 1600x1600x1600mm - Weight: 1550kg – Italian-made – Very good condition – Used multi-blade saw Net price: 33,900 PLN Net price: 8,070 EUR (exchange rate: 4.2 EUR) (Prices may vary with greater exchange rate fluctuations)

Year of construction: 1997, condition: ready for operation (used), Technical Specification Max. Cutting Length 4200 mm This SCHELLING FL 430/410 panel saw was manufactured in 1997. It features a cutting length of 4200 mm, a slider of 4100 mm, and a saw blade diameter of 450 mm. The saw blade projection is 130 mm, and it can handle package heights up to 120 mm. Powered by a robust 31 kW motor, this machine offers reliable performance for your cutting needs. Contact us for more information about this machine. Bledpfxox A I Huo Ab Tsr Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2014, cutting diameter 360 mm Bsdsx A H Tyopfx Ab Tjlr capacity 90 degrees: flat 500 x 350 mm capacity 45 degrees: round 360 mm capacity 45 degrees: flat 420 x 300 mm capacity 60 degrees: round 300 mm capacity 60 degrees: flat 300 x 200 mm turning speed range: 20 - 100 m/min dimensions of saw-band 4780 x 34 x 1.1 mm engine output 3.0 kW Control SPS weight 740 kg range L-W-H 2800 x 1080 x 2340 mm In good condition Current new price approx. 17.000 euros Special price on request Features: - Robust electro-hydraulic semi-automatic band sawing machine (INDUSTRY) * For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals, and plastic - with miter cuts from 60° right to 60° left * Cutting angle fixed via quick-release lever - Swiveling control panel with NC “SPS MITSUBISHI” control - Infinitely variable saw blade speed - Saw blade guide with adjustable carbide plates for precise cutting - With robust three-phase motor with overload protection - Saw blade drive with low-maintenance, oil-lubricated worm gear - With mechanical saw blade tensioning and monitoring - Chip removal brush for optimum cleaning and maintenance of the saw blade - Coolant device - 1x replacement saw blade - Operating instructions

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg ADVANTAGES – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Bjdjwmfqhspfx Ab Telr Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations) Blsdpfx Asvxu Alsb Tsr

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm Bodpfx Aewmqppeb Tjlr – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7532 TECHNICAL DATA - Track width: 340mm - Shaft width: 400mm - Shaft diameter: 65mm - Max. saw blade diameter: 400mm - Saw blade bore diameter: 80mm - Max. cutting height (with 400mm blade): 140mm - Table width with clearance: 870mm - Table length: 2140mm From the top: - Pawls - 1 pressure idler roller - Pawls - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding pressure shaft From the bottom: - Guide rail - Idler roller - Pawls - Track - Electric body lifting: 0.55kW - Electric saw shaft lifting: approx. 0.55kW - Central lubrication - Stepless feed speed adjustment via frequency inverter (1.5kW): 8-48m/min - Main motor: 55kW - Extraction nozzle diameter: 300mm - Overall dimensions (L/W/H): 2540x1480x2570mm - Weight approx.: 3500kg ADVANTAGES – Manufactured in Germany – Fitted with 5 pcs 350mm diameter saw blades – Electric height adjustment – Operator control panel – Stepless feed speed adjustment – Used multi-rip saw, in very good condition Blodovu A Eyspfx Ab Tor Net price: 145,900 PLN Net price: 34,730 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations) Blsdeug Uguopfx Ab Tjr

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades Blsdpfx Ajt Ht Hhjb Tsr - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.