Used Glass Saw for sale (9,917)

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Cutting plane directly at the saw blade Heavy-duty steel and cast iron construction Smooth-running and precise sliding table made of anodised aluminium with a proven and durable ball contact system on hardened guides; 10-year warranty against wear on the guide rails Large-area squaring frame guided on a telescopic arm and longitudinally adjustable Angle-adjustable aluminium telescopic fence with professional flip stops Parallel fence with quick-release and fine adjustment Large working table made of precision-machined cast iron remains permanently flat Standard table extension and width extension facilitate easy handling of larger workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made of cast iron is mounted twice on the cast table, ensuring stability, precision, smooth running, and long service life Maximum cutting height is maintained even with a scoring unit installed Made in Italy TECHNICAL DATA Dimensions and Weights Chsdpsx Alqdsfx Ab Tef Weight (net) approx. 380 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Duty type of drive motor: S6 Duty cycle of drive motor: 40% Sliding Table and Table Sliding table length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Squaring length: 2250 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 100 mm Max. cutting height at 45°: 78 mm Saw blade diameter: 315 mm Note: Saw blade diameter independent of scoring blade Saw blade speed: 4000 rpm Scoring Unit Scoring blade diameter: 80 mm Scoring blade speed: 8000 rpm Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm, max. cutting height: 2200 mm, saw blade diameter: 250 mm, max. machining thickness: 60 mm, saw blade bore: 30 mm, lower support: plastic rests, material support: retractable plastic rails, measuring system: scale, saw head tilting: manual, saw feed: manual, mounting: freestanding, extraction: external, saw beam locking: manual, weight approx.: 1000 kg, dimensions: 5600 x 1700 x 3000 mm, motor power: 4.2 kW Chodpfx Asxg Igijb Tof Storage location: supplier

Condition: excellent (used), Pertici 402-IP Double Miter Saw Cedpsx Aibtofx Ab Tjhf Maximum cutting length: 3500 mm Maximum cutting width: 200 mm Double miter angle adjustment: 45/-45° Motor power: 2×2.2 kW Saw blade speed: 3200 rpm Blade diameter: 400 mm Pneumatic material clamping Technical documentation CE certificate Year of manufacture: 2021 Machine available on order

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control Cjdex Adlgopfx Ab Tshf • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor Codpfxexz Ulzs Ab Tehf TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1988, On offer: Chodpfx Ajx Dxy Usb Tef A multirip saw by PAUL Brand: PAUL Model: K34C/800 Year of manufacture: 1988 Machine type: Multi-blade rip saw / Multirip Feed width: 800 mm Max. cutting height: approx. 100 mm Saw blade diameter: 100–280 mm Feed speed: up to 50 m/min Power connection: 3 × 380 V / 50 Hz Connected load: 17.2 kW Rated current: 35 A Protection: 50 A slow-blow fuse Control voltage: 220 V / 50 Hz Ideal for fast and precise ripping of panel materials: chipboard, MDF, OSB, solid wood, plastic and composite panels (including GRP/CRP, fiber cement) Perfect for furniture parts production, battens and batch cutting.

Condition: good (used), Year of construction: 2009, Bürck + Lang underfloor saw with automatic feed, profile clamping device, lateral adjustment options for the cutting width, fully functional Chsdpfxewb H T Tj Ab Tsf

Condition: used, Year of construction: 2000, Cutting width: 5300 mm Cutting height: 2200 mm Processing depth: 80 mm Fence: digital Feed: automatic Saw blade diameter: 300 mm Saw blade speed: 4750 rpm. Free-standing Cjdpfxex Akuue Ab Tjhf Location: Nattheim

Condition: good (used), Year of construction: 2005, Main components: Washing machine, scanner, inspection station, gas filling press, cork applicator, automatic sealing, water treatment. Csdpfxsx Dtq Io Ab Tshf The system dates from 2005, except for the washing machine (1992). The brushes are in perfect condition. Total length of the system: approx. 43.8 m. Condition: good, second-hand

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.128351, DOUBLE MULTI RIP SAW 1400 MM. TOP+BOTTOM SHAFTS. MOTOR KW 55 / A 102 Cjdpjx Dth Tefx Ab Tjhf MACHINE OFF / DIRECT OUT OF RUNNING PRODUCTION 6-7 YEARS AGO. CONDITION IS GOOD. require brochure /leflet

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip divider groove grinding machine. Grinding range approx. 120-600 mm diameter Saw blade tooth pitch max. approx. 22 mm Control: Siemens PLC with automatic shut-off after grinding process Grinding spindle: High-frequency spindle, 24,000 rpm, power 800 watts! Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: oil-bath lubrication Chjdpfxjqpdi Rj Ab Tof Saw blade thickness adjustment: via backlash-free preloaded ball screw Grinding stroke: via heavy-duty linear roller guide Accessories: - 1 set of reducing rings 16x22,25,32,40,50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping (very low air consumption)

Condition: used, Year of construction: 2019, functionality: fully functional, We hereby offer this used SCM Gabbiani PT beam saw from 2019, located in Slovakia. This advanced woodworking machine is designed for high-speed panel cutting and features a cutting length of 3300 mm, ideal for processing large sheets with precision. It offers a fast carriage feed speed of 120 m/min, enhancing productivity, and is powered by a robust 7.5 kW main motor, ensuring reliable and consistent performance in demanding industrial environments. Chsdpfx Aoxq Hn Heb Tof Included with the Machine: Diamond pre-cut. Main roll 10 pcs.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 7,100 mm, total width: 2,300 mm, total height: 3,270 mm, input voltage: 400 V, working height: 800 mm, overall weight: 2,300 kg, input current: 40 A, input frequency: 50 Hz, power: 16 kW (21.75 HP), Equipment: documentation/manual, Perfectly working machine. Chedpfsx Dl U Esx Ab Tef

Condition: good (used), Robland NZ3800 format saw with a trolley Scorer on a separate engine, Codpsvyixwjfx Ab Tjhf 380cm trolley length 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable culaga on the right side motorically adjustable, i.e. we enter the dimension and it is set, max 1520mm 5.5KW main engine 3 cutting speeds A branded machine, technically fully functional, will still fulfill its functions well

Condition: excellent (used), IM Very good condition. Chedpfxsxp Uqao Ab Tjf

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 80 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 300 mm, table length: 3,200 mm, height adjustment type: hydraulic, type of input current: three-phase, input voltage: 400 V, Equipment: saw blade guard, Year of manufacture: 1991, in very good condition and free of play First owner Almost exclusively used for processing panel material Sliding table 320 cm Codpfx Aox Dkvzeb Tshf 45° hydraulically tiltable Scoring unit All stops, protective covers, and required accessories included

Condition: used, Year of construction: 2011, Mössner saw SSF520; acquisition cost approximately 100,000 euros. Chjdpfxox Dkdro Ab Tjf

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 Codpfxei D Dgwe Ab Tehf 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1990, functionality: fully functional, saw band length: 4,100 mm, type of input current: three-phase, cutting range round steel at 90°: 260 mm, cutting height (max.): 260 mm, For sale is a Behringer bandsaw, year of manufacture 1990. Technical data: - Cutting range Ø 260 - Adjustable cutting length - Automatic feed - Parts counter - Chip conveyor Csdpfx Abexmhd Ue Tehf The saw comes with a 2-meter roller conveyor and several saw bands. The saw was in use until recently and can be inspected under power.

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Csdpfx Aeudi Unjb Tehf Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Chedpsi D Ddiefx Ab Tsf Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Chjdpfxjw U Skvs Ab Tef Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Chedpewq A Dysfx Ab Tof Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Chodpfxov R Tgto Ab Tof Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Chjdsvuf S Njpfx Ab Tof Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.