Used Gear Test for sale (24,218)

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m Gbedpov U T Dysfx Afisu

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Gbjdpfjwuqwvex Afisu Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Gbjdpfxoxfub De Afiju Make: STAEHELY SH 500 Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6

Condition: excellent (used), 3x. Identical bevel gear planing machine. Type H12 with accessories, under power Gbodswb Uxwjpfx Afieu

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W Gbjdovm Efaepfx Afisu PRAWEMA 2006 SYNCHROFINE 205 HS

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Gjdpfjxciwzex Afijbu Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: - Various tool holders Gsdpfovfwuqex Afiobu - Various clamping devices - Documentation

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover Gsdpfxepxmlio Afijbu - Table rotatable - Manual fine feed - Limit switch protected spindle

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical data: - Drilling capacity in steel ST 60 25 mm Gbedpfxofmh R Uj Afiou - Drilling spindle holder MK 3 - 8 drilling spindle speeds 100 - 2700 rpm - drill spindle stroke 130 mm - 4 feeds 0.1 - 0.3 m/rev - Overhang 270 mm - Column diameter 115 mm - drilling unit + table height adjustable -with crank handle over rack - Table dimension 350 mm - Drive 400 V / 0.8 / 1.1 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg

Condition: excellent (used), Year of construction: 1979, Machine can be inspected on site Gjdjwbvwnjpfx Afijbu

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Habrama Rack Milling Machine ZFM Compact 2200 Manufacturer: Habrama Type: ZFM Compact 2200 Control unit: Siemens 840D Sinumerik Year of construction: 2025 Travel distances: X-axis longitudinal: 2250 mm Y-axis transverse: 430 mm Z-axis vertical: 310 mm C-axis: +30 degrees / -30 degrees The basic equipment includes: - Partial enclosure - Direct position measuring systems for the X and Z axes - Chip conveyor - Vibration damping mounting elements - Coolant fine filter system - One set of milling arbors Ø50 Weight: 22,000 kg Complete documentation is available. Inspection under power can be arranged at short notice. For further questions, we are at your disposal. Price, ex works here plus VAT Condition: good - ready for demonstration Gbjdpewngg Hofx Afiju Delivery: ex stock - as inspected Payment: net upon receipt of invoice Prior sale and errors excepted. We kindly ask for your order. More machines and equipment available from stock – Please inquire. We look forward to hearing from you.

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Gbjdpfjxcivqsx Afiju Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm Godoxb Arpjpfx Afiebu max. workpiece weight: 60 kg without filter *

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: Gsdpoxb Dm Isfx Afiebu 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone.

Year of construction: 1990, condition: good (used), Offer 25223 Technical data: (non-binding) - Test panel for wall mounting with various test devices Gbodpjwu Sxnsfx Afieu - Space requirement: W 600 x H 850 x D 300 mm - Weight: 40 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Diameter hollow shaft: Ø 14 mm -Construction: B5 Gbsdjc Nlynspfx Afisu -Number: 3 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) 26 mm throat 280 mm Drilling stroke 100 mm Gjdpfx Aem Sg Rkefijbu Total power requirement 1000 Watt , 380 V Machine weight approx. 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Height max .500 mm Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: used, Year of construction: 1954, total height: 2,000 mm, total width: 1,600 mm, total length: 2,400 mm, Empty weight: 10.000 kg Price: On request Chuck: 700mm  Workpiece maximum height: 550mm  X axis displacement: 450mm - Year: 1954 - Documentation available: No Gjdpfx Ajxbq U Sofiebu - Transport dimensions: 2400mm x 1600mm x 2000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Gjdpfx Afoxbrkhjiobu Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1970, condition: good (used), machine/vehicle number: 306466, Offer 21313 Technical data: - Lifting capacity 2000 kg - Lifting height - chain travel approx. 4 m Gbodsg D N Iwopfx Afisu - Weight approx. 60 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor Gbodpfx Aec Nlypofisu -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Diameter hollow shaft: Ø 19 mm -Construction: B5 -Number: 2 motors available -Price: per piece -Dimensions: 350/180/H200 mm -Weight: 14 kg

Condition: excellent (used), Vötsch Type: VT 3050-M Vötsch Subassembly Test Chamber Lifetimetester, Air-cooled Vötsch VT 3050-M Temperature Test Chamber / Climatic Chamber 500 Liters For sale is a used Vötsch VT 3050-M temperature test chamber (500 L internal volume). It is ideally suited for temperature tests in research, development, industry, or quality assurance. Features: - Durable stainless steel interior - 1 shelf included - Cable port (Ø 80 mm) - Interior lighting - Mobile on casters - Safety functions (thermal limiter, etc.) Technical data: Manufacturer: Vötsch Model: VT 3050-M Internal volume: 500 L Temperature range: –30 °C to +100 °C Internal dimensions (W × D × H): approx. 710 × 590 × 1250 mm External dimensions (W × D × H): approx. 940 × 1030 × 1955 mm Heating/cooling rates: approx. 2 K/min (heating), 1.4 K/min (cooling) Max. heat compensation: 650 W Control: modern touchscreen panel (multi-language), Ethernet port Power supply: 1/N/PE AC 230V+10% 50Hz Rated power: 2 kW Rated current: 12 A Refrigerant: R-404A Weight: approx. 350 kg Gbsdpoxbrffjfx Afisu Important buyer information for your safety: The following procedures are carried out on all chambers offered by us prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, a documented trial run of the chambers is performed. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece Gsdpfoptf Iaox Afiobu

Condition: good (used), Year of construction: 1997, Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 Gjdpfxewx Ek Ss Afisbu -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, gear motor with brake -Type: R43DT90S4BMG/HF/TF -Speed: 97 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 25 x 50 mm Godpfxochq Ige Afiebu -Protection class: IP 54 -Brake: 20 Nm -Number: 5x engines available -Price: per piece -Dimensions: 570/280/H210 mm -Weight: 33 kg