Honing machine

Sunnen

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Ijdjud Nm Rspfx Aktetg Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Iedpfeh Ug Ulsx Aktjtg Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: used, functionality: fully functional, input voltage: 400 V, Precision Cross-Honing Machine Sunnen Eclipse EC-3500 CGM-27 used Bore diameter – honing range: 1.5 – 165 mm Iodpfx Akoyx Dv Hotstg Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Strokes: 60–500 strokes Total power requirement – spindle drive: 4.1 kW Reciprocation motor: 1.1 kW Machine weight approx. 1,200 kg SICK safety light curtain Horizontal cross-honing machine / honing machine type EC 3500 and operating manual Inspection under power possible by prior appointment. Price on request All technical data subject to misprints/errors Sale exclusively to EU countries.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2D1-1116, total height: 1,905 mm, total width: 1,626 mm, total length: 1,219 mm, overall weight: 725 kg, For sale: as new, barely used, highly precise (±0.001 mm) automatic hole honing machine, sold together with numerous precision instruments, measuring devices, and extensive accessories for honing bores from D6 to D25 mm. The machine is connected to the power supply and ready for immediate operation. Iodpfxey E N R Nj Aktotg

Condition: like new (used), Year of construction: 2022, CMZ TA 20 YS-640: YEAR: 2022 CNC: Fanuc 32i FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 640 mm Distance between chuck faces: 649 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min MAIN SPINDLE: SMW 210 mm chuck Bar capacity: 66 mm Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm TURRET: 12-station turret, all positions live tooling Max. live tool speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm SUBSPINDLE (Servo): SMW 175 mm chuck Chuck bar capacity: 56 mm Max. usable bar: 52 mm Spindle speed: 4,500 rpm Power: 14 / 18 kW Spindle nose: ASA 6 A2 Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: SMW Autoblok BBD 250 chuck SMW Autoblok BBD 175 chuck Tool presetter Servomotor for sub-chuck Set of tool holders including 2 live tool holders Chip conveyor Cycle end lamp High-pressure pump Manual/automatic parts catcher arm (80 x 220 mm – 8 kg) Isdpjyzfbvsfx Aktstg Parts ejector for sub-spindle Interface for bar feeder and mist extractor Set of fixed and live tool holders Set of 3 jaws for each chuck TOP AUTOMAZIONI X-files S-364 SX bar feeder, 3,200 mm/diameter 64 mm MACHINE CONDITION: Machine in excellent, as-new condition! Can be seen in operation.

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min Isdpfx Akowva Rnstjtg total power requirement 0,9 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Itodpfsy Ax Tnox Aktsg

Condition: used, TECHNICAL DETAILS Iedpoyxr Uqsfx Aktjtg - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, SUNNEN ML2000 Honing Diameter Range: - Manual Stroking: 1.5 mm to 165 mm - Power Stroking: 1.5 mm to 102 mm Spindle Speed: - Infinitely variable from 200 to 3,000 RPM Stroke Rate: - 60 to 350 strokes per minute Automatic Sizing Range: - 3 mm to 51 mm Oil Tank Capacity: - 106 liters Pneumatic Requirements: - 5.5 bar Machine Dimensions: - Length: 1,600 mm - Width: 1,220 mm - Height: 1,900 mm Isdeyf N Adjpfx Aktotg Weight: - Approximately 725 kg

Condition: refurbished (used), Honing machine SUNNEN ML3500 (like ml5000 ml2000 ec3500 ml 5000 ml 2000) Itsdpfx Akow Npt Rjtsg this machine is currently under complete electronic retrofit (Siemens) Touch screen. Loader interface possible

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers Itedpfx Aoyffgroktog • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: refurbished (used), Honing machine SUNNEN EC3500 (like ml3500 ml5000 ml2000) SOLD - contact us for alternatives e.g. ML3500 o ML2000 complete electronic retrofit (Siemens / Telemecanique) Itedpfxsphvk Io Aktjg Touch screen. Loader interface possible

Condition: used, Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Honing dia (min-max): 1.5-120 Honing length (max): 250 Isdpfxewpw A Ij Aktstg

Condition: used, Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. Itjdjynmpgjpfx Aktog -Reitstock mit Feinverstellung -Innenschleifeinrichtung -Kühlmittelanlage Zubehör auf Anfrage

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 5,000 kg, spindle speed (max.): 2,987 rpm, total width: 3,000 mm, total length: 36,000 mm, space requirement height: 2,500 mm, space requirement length: 37,000 mm, space requirement width: 3,000 mm, We are offering this used Sunnen HTC 16000 honing machine, year of manufacture 1999. It can also be adapted for 6m lengths... Manufacturer: Sunnen HTC 16000 Model: HTC 16000 Year of manufacture: 1999 Condition: used Isdsyx Hazjpfx Aktotg Category ID: 222 Type ID: 2524 Machine type: honing machine • Max. stroke: 12,000 mm • Current working length for tubes: 17,200 mm (divisible into 6 m sections) • Spindle speed (idle): 2,987 rpm • Rated power: 5,500 Watts • Internal diameter range: Ø23.2 mm to Ø205.00 mm • Clamping fixture: prism/chain • Max. workpiece weight (internally used): approx. 5 tons If you have any questions or require further information, please feel free to send us a message or give us a call.