Used Gear Hob for sale (14,694)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, module thread tooth pitch (max.): 7, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Dcjdpfx Afsw T R Ahs Ijn Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500 × 2700× 3600 m Dcjdpsw Sykrjfx Af Ien

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation Dcedpfew Rrb Hex Af Isn

Condition: used, TECHNICAL DETAILS Djdpfx Aeuhbplsf Iscn - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg].

Condition: good (used), Max. diameter: 800mm Dodpfx Asv Dvvqjf Iecn Max. module: 10

Condition: good (used), Liebherr / Lorenz L 301 / Gear Hobbing Machine - Maximum hobbable module: 6 - Max. workpiece diameter: 300 mm - Travel of hob head slide: 225 mm - Worktable diameter: 315 mm - Milling spindle centerline above machine table: 165 mm - Max. workpiece length: 680 mm - Infinitely variable radial feed - Rapid traverse of hob slide: 900 mm/min - Max. hob shifting / tangential travel: 150 mm - Change gears - Belt filter - Various accessories - Documentation Dimensions: Djdpfew A Nfhox Af Iecn L x W x H: 2.6 x 2 x 2.6 meters / Weight: 6000 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Dedpfx Aew T R Abjf Iocn Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Y-axis travel: 33 - 193 mm MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Workpiece counter: 886,067 pieces

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Dcedjwkih Espfx Af Ien

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm Dcsdpfx Aokw T Rmsf Ijn largest milling length 100 mm with all accessories

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] Dodpfx Aeuhbp Ejf Iscn EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device

Condition: used, Year of construction: 1988, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: Dcodovrk Ecjpfx Af Ion The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm -Max. cutter diameter: 186 mm Djdpjw R Tyksfx Af Ijcn -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Djdpfx Aow T Ry Tof Iscn Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Year of construction: 1999, condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Dcsdpfxsvpviuj Af Ien

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] Dedpfxsuhbqie Af Iecn - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . Dcedpjwhq Afefx Af Isn total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: good (used), MIKRON - A 21 / 2 Gear Hobbing Machine -Full technical specifications see photos -Change gears -Mitutoyo magnifier -Original operating manual - COMPLETE -Many spare parts -Very well-maintained overall condition Dimensions: LxWxH 1.2x1x1.6 meters / Weight 1000kg Errors and input mistakes excepted Dcedpfxjw D Dbyj Af Isn

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm Dedpfxjvkpu Hs Af Iscn max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, TECHNICAL DETAILS - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] Dodpfxjuhbp Se Af Ijcn - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW Dcodpfjwhq Easx Af Ijn weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: good (used), Gear Hobbing Machine STAEHELY SN 505-1 -Max. gear diameter 600 mm -Gear width 280 mm Dodpfjw D A R Tsx Af Iscn -Max. module 5 -Centre height 20 / 390 mm -Rotary table diameter 420 mm -Table bore 80 mm -Spindle taper MK 4 -Cutter speed 53-200 rpm -Number of feeds 10x -Original documentation -52 pcs – hobs included -156 pcs – change gears included Dimensions: LxWxH 2.5 x 1.5 x 2 metres / Weight 3000 kg Subject to errors and omissions.

Condition: used, EQUIPMENT - With automaton Zellio SR3 type Dsdpsuhbqpjfx Af Iscn - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: used, Year of construction: 1989, max. wheel diameter 150 mm Djdpfx Aswhq Egof Ijcn max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500x 2700x 3600 m

Condition: used, TECHNICAL DETAILS Dsdpeuhbqcofx Af Iscn - Distance between centers : 35 [mm] - Max. stroke of the tail stock spindle : 10 [mm] - Max. tail stock movement : 10 [mm] - Max. stroke of the plunge Y axis : 5 [mm]

Condition: used, Year of construction: 1986, max. wheel diameter . mm gear width . mm max. module . weight of the machine ca. 7 t Dcedoucgw Djpfx Af Ien