Used Gear Deburring Machine for sale (70,685)

Condition: used, Year of construction: 2009, functionality: fully functional, working width 1100 mm 3 internal operator groups 1 external operator group belt cooling via liquid Ksdjznm S Topfx Apmsna

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Kodpszq Sq Hjfx Apmsna Year of manufacture: 1981 Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Ksdpfx Apetzkg Uemsna Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: good (used), Min. Pipe length: 100-1800 mm Knsdpfxjq U Rcco Apmsa The system was previously used for deburring cut pipes!

Condition: excellent (used), Capacity M16 module Table diameter: 1,200 mm Ksdpezql Ufjfx Apmona Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Table center hole diameter: 250 mm

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Ksdpfoza Egbox Apmjna Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: defective spare-parts repository (used), functionality: not functional, workpiece diameter (max.): 400 mm, According to the electrician, the main motor needs to be rewound. The carbon brushes should be replaced, and two coils in the control cabinet need to be replaced as well. Kedpozp R Tkefx Apmona Up until the motor failure, the machine was fully operational.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 622336, Offer 22681 Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 Knodjzp E Ucopfx Apmea - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions: 400 x 450 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 850 mm - Weight: approx. 300 kg - Including: - Drill chuck - 10 HSS drill bits, 8 – 20 mm

Condition: used, Year of construction: 2025, 12 months warranty Knjdpfxszp Drmj Apmsa

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Ksdpfx Aotr Aviepmjna Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t Ksdpfx Ajy Umi Iepmena dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: used, Year of construction: 1991, functionality: fully functional, total length: 4,920 mm, total height: 2,500 mm, total width: 2,855 mm, workpiece diameter (max.): 200 mm, For sale is a Mikron A35 CNC gear hobbing machine in well-maintained and operational condition. The machine impresses with its high precision, reliability, and productivity, and is ideally suited for the economical production of gears and toothed components. Knodpfx Aszphw Topmea Technical data: Manufacturer: Mikron Model: A35 CNC Machining process: CNC gear hobbing Max. workpiece diameter: 200 mm Max. module: 3.0 / 4.5 Max. workpiece length: 400 mm Cutter speed: up to 1,500 rpm The technical specifications correspond to the standard specifications of the Mikron A35 CNC. Condition: Fully functional Regularly maintained Inspection possible under power after prior arrangement Available immediately or by agreement.

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Series 2200 Knsdpfjy Tu Dksx Apmea

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t Kodpfjy Auy Rsx Apmsna - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Timesavers 42 Series-1350-WRB Kjdoznm R Njpfx Apmsna The 42 series features 2 stations: a belt sanding station, which is ideal for removing burrs and raised edges, and a second station with rotary brushes for even edge rounding. The vacuum conveyor belt also makes processing small parts, even those the size of a business card, easy. Working width: 1350 mm Table opening: 0.8-100 mm Conveyor belt: frequency-controlled and steplessly adjustable in speed Rotary brushes: frequency-controlled and steplessly adjustable in height and speed Note!! The vacuum pump shown in the pictures is missing; it will be mounted on top of the machine.

Condition: as good as new (ex-display), functionality: fully functional, Timesavers Series 10 The Series 10 features a pivoting head and a side for quick abrasive wheel changes. We use this side to remove spatter and high burrs. The second side has a mount for a flap brush, which is used for edge rounding and finishing. Due to the various tool options, the Series 10 is a true all-rounder and is suitable for deburring, edge rounding, finish sanding, and removing heavy scale. The 180° rotatable head allows for quick and easy tool changes. Knjdpsznlyvofx Apmsa The machine is equipped with a vacuum system, and the motor speed is continuously adjustable. The machine is extremely flexible, comes with rollers for easy movement, and its simple operation makes it a user-friendly machine that is accessible to everyone.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 550 mm Kodszk Dyyspfx Apmena MACHINE DETAILS Power: 32 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1100-WTBTB The Series 22-1100-WTBTB, with a passage width of 1100 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, waterjet-cut, or plasma-cut parts thanks to its 3 stations. The belt grinding station allows for the removal of burrs and raised edges. Subsequently, the edge is deburred and slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for the belt and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment. Kedpfx Apoznlxrsmsna

Condition: excellent (used), Timesavers Series 12-600-WW Passage width 600mm Station 1: Grinding belt, pre-grinding, removes laser spatter and raised burrs. Station 2: Grinding belt/scotch belt, final grinding, surface finishing. Kodpfx Apoznltiomena The Series 12-600-WW is ideally suited for deburring and finish grinding sheet metal up to 100mm thick. The two grinding belt stations provide a uniform, clean finish on the surface of your sheet metal.

Condition: used, Year of construction: 1967, functionality: fully functional, machine/vehicle number: 150:10486, gear diameter: 150 mm, total height: 1,400 mm, total width: 800 mm, workpiece diameter (max.): 150 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 112 rpm, overall weight: 1,300 kg, tool diameter: 50 mm, For sale is a reliable Koepfer 150 gear hobbing machine. This machine is ideally suited for the economical production of spur gears, pinions, and other types of gears, both for individual parts and for series production. Kedpfxszfhyyo Apmona

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. Kjdst Hwylspfx Apmena * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Knodot Hww Depfx Apmea Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm Knjdpfx Ast Hw Aaepmea max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW Knsdpfx Apot Hwqqomsa weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Kedpfx Aet Hwruspmjna Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.