Used Gary Long Furnace for sale (7,028)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: Nsdpozu Nvzjfx Am Sowk In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: ready for operation (used), Heraeus MR 260 Annealing Furnace Internal dimensions: 260mm x 500mm x 160mm (W x D x H) Space required: 1100mm x 700mm x 1560mm (L x W x H) Weight: 150 kg Rated temperature: 1000°C You are welcome to visit us for an inspection. We can arrange cost-effective shipping for you! Nwedpfx Amjzu Nate Ssk You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, mileage: 153,000 km, power: 75 kW (101.97 HP), first registration: 02/2024, fuel type: diesel, overall weight: 2,380 kg, next inspection (TÜV): 02/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,753 mm, total width: 1,848 mm, total height: 1,880 mm, Equipment: air conditioning, central locking, cruise control, sliding door, truck registration, Cargo Edition 1.5 XL, Nedpfjzi Rixex Am Sjwk L2H1, EURO 6, 1st owner, Sliding door on both sides, Partition with window, Multi-function steering wheel, Central locking with remote control, Electric windows, Electric exterior mirrors, Air conditioning, 6-speed transmission, Cruise control, Gross vehicle weight 2380 kg, Service history available, Last engine oil change 03/2026 at 150,000 km, German registration Mileage according to odometer Vehicle is preferably sold to businesses or for export, Private sale possible, subject to availability Sold without warranty Net price for export Net: 8,600 EUR + (19% VAT) 1,634 EUR = Gross: 10,234 EUR The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, functionality: fully functional, Year of construction: 1989, Working width: 6.0 m Bending capacity: 1.25 mm steel Year of manufacture: 1989 Condition: Good Includes motorized slitting shear Includes digital control system (retrofitted) Nodpfozu Ilzjx Am Sswk

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 200 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes Nsdpfsy H E Ndsx Am Sjwk - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Condition: used, Belt length: 7330 mm x 150 mm, handwheel adjustment Storage location: Nattheim Nwsdpszkl Ufefx Am Sok

Condition: good (used), mileage: 85,731 km, power: 70 kW (95.17 HP), first registration: 05/2021, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,700 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,320 mm, total width: 1,830 mm, total height: 1,810 mm, loading space length: 1,510 mm, loading space width: 1,500 mm, loading space height: 1,260 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual Nedpfx Amszh U R De Sewk - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 612 kg, Unladen weight: 1368 kg, Gross vehicle weight: 1980 kg, Trailer load, unbraked: 690 kg, Trailer load, center axle, braked: 1050 kg, Type of cab: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: Black, Metallic, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 70 kW (94 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side wall cladding, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, LONG 95Pk Euro6 Airco 1e Eigenaar Pdc!, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-17-PVR Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Weights Unladen weight: 1,368 kg Payload: 612 kg GVW: 1,980 kg Functional Height of loading area: 57 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €192 per month (delivery van, 72 months); Inquire for more information and conditions.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm Nwodpfjztap Asx Am Ssk engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: new, functionality: fully functional, mileage: 11 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,130 kg, maximum load weight: 1,370 kg, first registration: 04/2026, next inspection (TÜV): 09/2028, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, summer tires, truck registration, 9147 Paint color Arctic White MB 9147 A50 Front axle with increased load capacity AR3 Axle ratio I = 4.182 BA3 Active Brake Assist BH8 Control code for hydraulic unit variant 7 BK2 Control code for wheel brake configuration 2 C6L Multifunction steering wheel CL1 Steering wheel adjustable in inclination and height CL2 Leather steering wheel and leather gear shift knob D03 High roof D50 Fixed partition E07 Hill start assist E1D Digital radio (DAB) E1U USB socket 5 V E4S Smartphone integration package E57 Wiring for trailer socket E7B Pre-installation for navigation system E7M MBUX multimedia system ED4 Fleece battery 12 V 92 Ah ES0 Jump start contact EW6 Pre-installation for Remote Services Plus EY5 Mercedes-Benz emergency call system EY6 Breakdown management F64 Exterior mirrors, electrically foldable F68 Exterior mirrors, heated and electrically adjustable FKA Box van FQ6 Lockable compartment in storage above the windshield FR8 Rear view camera GD8 6-speed manual transmission ECO Gear H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic controlled air conditioning system Tempmatic IC1 Model series C907/C910 Sprinter IE0 Model series C907 VS30 Rwd IG5 Basic IH1 Head unit Europe/CIS countries/Mongolia IK0 Complete vehicle Nwjdezr Nc Nopfx Am Sjk IL5 Left-hand drive IR4 Wheelbase 3665 mm (BM-defining code) IT4 3.5 ton vehicle J10 Speedometer km/h J55 Seat belt warning system for co-driver's seat J58 Seat belt warning system for driver's seat J65 Outside temperature display JA7 Blind Spot Assist JA8 Crosswind Assist JB4 Active Lane Keeping Assist JF1 Rain sensor JG0 Shift point display JH3 Communication module (LTE) for digital services JI7 Start-up distance, maintenance interval 60000 km JK5 Instrument cluster with color display JS2 Intelligent Speed Assist JW8 Attention Assist KB7 Main fuel tank 93 liters KL5 Fuel filter with water separator KP7 Exhaust gas purification SCR generation 4 L Left-hand drive L13 Fog lights with cornering function L65 Dome light in cargo/passenger compartment with door contact L94 Park light omitted LA2 Headlamp Assist LB1 Side marker lights LB5 3rd brake light LE1 Adaptive brake light LX5 Europe M60 Generator 14 V/250 A M6B Emissions class Euro 6E - to N1 M72 Vehicle suitable for HVO MJ8 ECO Start-Stop function MS1 Cruise control MU3 Engine OM654 DE 20 LA 110 kW (150 hp) P4F Rating country set Euro-NCAP Q11 Longitudinal member reinforcement Q67 Towing eye at the rear R65 Spare wheel holder under frame end R87 Spare wheel RF1 Tire manufacturer Continental (10) RH2 Tires 235/65 R16 C RM7 Summer tires RY2 Tire pressure monitoring on front and rear axle, wireless S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Co-driver's seat, double seat SA5 Airbag driver SA6 Airbag co-driver SK2 Seat occupancy recognition driver's seat T16 Sliding door, right T77 Grab handle at the entrance of the cargo area sliding door on the partition T86 Entry handle on the rear right corner pillar V94 Cable duct on side wall V95 Cable duct on rear portal VF7 Fabric Maturin black X99 Manufacturer Mercedes-Benz AG XC9 COC papers XG7 Without uprating/downgrading to 3500 kg XM1 Noise reduction measures XM4 Acoustic package XO5 Digital operating manual XO9 Mercedes-Benz Mobilovan with DSB and GGD XQ1 VIN coded vehicle data with check digit XV0 Control code - BZM testing XW9 Control code change to WLTP XZ1 Model generation 1 Y43 Jack, hydraulic Z0G K-Matrix Generation 2 Z0Z Damping in engine compartment Z

Condition: used, Year of construction: 2009, Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Documentation available: No - CE certificate present: No - Power [kW]: 0.6 - Chamber length [mm]: 650 Nwodezry Ipepfx Am Ssk - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Nwsdpfx Amszryx Ue Sjk Technical data: - Table size: 2,800 x 950 - Motor: 5.5 kW - Belt width: 150 mm

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Nwsdpfezryw Dox Am Sek - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Nwsdpfx Amjqgfbgo Ssk

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Nsdoq Ttz Eepfx Am Sjwk

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Nwodpfx Aeyfv N Rem Sek

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Nwjdpjy N Uxgefx Am Sek

Condition: ready for operation (used), Year of construction: 2012, An automatic Kasto dual-tower storage system is available. Cassette usable dimensions X/Y/Z: 6500mm/840mm/440mm, cassette external dimensions X/Y/Z: 6620mm/976mm/485mm, C-profile height: 245mm, max. cassette payload: 1000kg, storage locations: 49, lifting unit speed: 22m/min, pull and push speed: 20m/min, system performance: 30double cycles/h, overall system dimensions X/Y/Z: approx. 7600mm/7250mm/7900mm. Documentation available. An on-site inspection is possible. Nwedpfx Aozd Eivom Ssk

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Nwsdpfsyvix Isx Am Sek

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Nodpevxvgrsfx Am Sowk

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Njdpfxotxb Avs Am Sowk

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Nwodpsygw S Aefx Am Ssk

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Nsdpfxsw Emyzo Am Sewk

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Nwodpfezhw Sdox Am Sek

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Nodpfx Astxb Apjm Sswk

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Nsdpfxotndwuo Am Sswk