Used Gantry Robots for sale (2,917)

Year of construction: 1999, condition: refurbished (used), Span approx. 20.0 m Outreaches usable on both sides approx. 5.0 m Lifting height approx. 9.0 m - Two-rail lower chord trolley with reinforced lower chord optionally with double hoists 2 x 5.0 t or single hoist 10.0 t Laodpfjmdrwkjx Affsk - Radio remote control (cabin control possible)

Condition: used, Kuka PC KPC ed05 Laedpfxjvgwxrj Affek Computer Robot Robot Industrial robot

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Max hoist height: 12,4 meters. Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Lasdpfx Aehk I H Deffok Transport can be arranged. Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Ljdpfx Afex D S Ekjfeak Application Types Milling

Year of construction: 2006, condition: like new (used), Span approx. 8,6 m Total height/lifting height approx. 5,2/4,2 m Total hook path approx. 20,0 m Operating hours only approx. 88 Year of manufacture 2006 Laodpfjfd Rx Rox Affok Crane equipped with: - STAHL monorail trolley of short design - Load display - Radio remote control

Condition: used, KUKA Robot Robot Laedpfjvgwugex Affsk ZH 16 II central hand ZH16II 00179289

Year of construction: 2000, condition: ready for operation (used), Control Unit Brand Andronic Model 2000 Main Drive Spindle speed range 25000 rpm Number of axis 3 Ljdjx D Dymopfx Affjak Additional Equipment Scraper belt conveyor with discharge height 1200 mm Temperature stabilization switch cabinet with high-performance cooling unit This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 1987, condition: refurbished (used), functionality: fully functional, Can be moved independently of rails Load capacity with spreader beam in parallel operation approx. 2 x 15.0 = 30.0 t Track width approx. 9.06 m Clear width within portal approx. 8.0 m Wheelbase approx. 4.65 m Usable hook path approx. 8.0 m Crane equipped with: Lasdpfx Afougkvxjfsk - Hook traverse with 30 t center hook and 2 outer single hooks of 15 t each - All-wheel steering for optimum maneuverability - 2 hoists separately and jointly controllable 15 t each (individual operation only 10 t each) - Deutz diesel engine and Danfos hydraulic system - Cab control Working speeds: - Hoist full load/partial load max. approx. 8.0/ 15.0 m/min - Trolley travel max. approx. 20.0 m/min - Crane travel max. approx. 80.0 m/min Special price for short-term decision: incl. dismantling free loading ex Berlin

Condition: used, KUKA ZH 210 / 240 Central hand robot arm 00106447 Ledpfx Afsvgwrfefeak

Year of construction: 2007, condition: ready for operation (used), Main Drive Number of axis 4 Lasdpox D Rgtofx Affsk Additional Equipment Machine feet 2x heavy duty pallet 3R clamping system 4 axis This 4-axis OPS INGERSOLL Gantry 1200 was manufactured in 2007. It features a 3000-liter dielectric capacity, machine feet, two heavy-duty pallets, and a 3R clamping system. Ideal for precision die-sinking EDM applications. Contact us for more information about this machine. Application Types EDM

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared Lsdpfoqfc Egox Affoak - Radio remote control - Optionally with magnetic traverse or spreader

Condition: used, ABB Foundry Prime Laedpfx Afsvgwqzjfok Central hand robot arm 3HAC032140-001 3HAC027514-010/02 3HAC021485-001/02 600XP 320 Mobilgear

Year of construction: 1994, condition: ready for operation (used), General Data Ledpfex D Iaqex Affoak Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model TNC415 This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1991, condition: refurbished (used), Track gauge currently approx. 42.5 m Outreache fixed support usable/total approx. 10.0/16.5 m Lajdpfx Aemdrxaeffek Lifting height approx. 8.0 m - Two Demag trolleys that can be moved separately and together monorail trolleys - Radio remote control and emergency control

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Lodpfex D E U Sox Affeak Milling

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation Ljdpfsmdrt Sex Affsak expandable to full gantry crane span approx. 8.5 m hook paths approx. 6,0 m DEMAG monorail trolley Floor control system

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm Ledpfsx D Hcwsx Affjak This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: excellent (used), Span actual approx. 25,0 m Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Year of reconstruction 2019 Lodsd N D U Dopfx Affsak

Condition: ready for operation (used), Year of construction: 2025, General Data Machine weight 58 kg Main Drive Number of axis 6 Max payload 25 kg Lajdpfx Afox D Hn Hsfjk This 6-axis ELITE Robots CS625 was manufactured in 2025, featuring a payload capacity of 25 kg and a reach of 1500 mm. It includes a controller, teach pendant, and offers a protection class of IP54, with an optional upgrade to IP68. Ideal for versatile applications requiring precise movement and positioning. If you are looking to get high-quality robotic arm capabilities, consider the ELITE Robots CS625 machine we have for sale. Contact us for more information about this machine. Application Types Robotics

Year of construction: 2016, condition: excellent (used), Span current/extendable approx. 8,0/12,0 m Lifting height current/extendable approx. 10,0/changeable m Make/Reconstruction DEMAG/TEICHMANN Year of construction/Operating time only approx. 2016/2 Jahre Stress group H2 B3 Crane equipped with: - DEMAG monorail trolley, short design in M5 - Radio remote control - Trolleys optionally available with wheel flange guide on Lasdpfx Afsqcu T Usfek flat iron rail or barrier free steel plate slat

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 10000 kg Measurements height 4089 mm Dimensions Machine Length 6127 mm Table Lsdpfx Aex D H Imeffjak Table load 2722 kg Main Drive Number of axis 5 Spindle Speed 20000 RPM Spindle motor power 12 kW Movement X-Axis Movement 3683 mm Z-Axis Movement 998 mm Y-Axis Movement 2223 mm Tools Max weight 5.4 kg This 5-axis HAAS GM-2 AX gantry milling machine was manufactured in 2020. It features extensive X, Y, and Z-axis travels of 3,683 mm, 2,223 mm, and 998 mm respectively, and a high spindle speed up to 20,000 rpm. The machine supports a maximum table load of 2,722 kg and includes a 30+1 position tool changer. If you are looking to get high-quality milling capabilities consider the HAAS GM-2 AX machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2010, condition: refurbished (used), Span approx. 6.5 m Lifting height under pulleys approx. 6.0 m Total height approx. 7.9 m Lasdpfx Afemdrymsfek - Tyres 16.00-25 N°4, 10 kg/cm², 2 of them driven - 2 hoists separately and jointly controllable - Iveco diesel engine 74 kW, 2200 rpm - Hydraulics Bosch-Rexroth, Sauer-Danfoss - Electrical control Siemens, Télémécanique - Operating hours only approx. 600 hours

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 rpm Spindle motor power 15/18 kW Number of axis 3 Movement X-Axis Movement 2100 mm Y-Axis Movement 1200 mm Lodpfsx D E S Dex Affsak Z-Axis Movement 1000 mm This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2008, condition: excellent (used), Track centre distance currently approx. 59.75 m Projections on both sides currently/formerly available approx. 12.0 /32.0 m Lajdpfjqcvf Hsx Affok Lifting height approx. 14.5 m Make/new body TEICHMANN Baujahr/Neuaufbau 2008/2017/2024 Crane equipped with: - Two-rail slewing trolley with STAHL double hoists Equipment for grab and magnetic traverse operation - Radio remote control (cabin control can be retrofitted)

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1750 mm Y-Axis Movement 1400 mm Z-Axis Movement 650 mm Ledpfx Afex D Hacofoak This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine. Application Types Milling