Used Gang Drilling Machine for sale (92,243)

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 23 mm throat 270 mm bore stroke 110 mm Dcodpfxetqy Ngj Af Isn taper MK 3 MK table-size 400 x 385 mm feeds mm/U turning speeds 135 - 825 U/min total power requirement 0,9 KW weight of the machine ca. 0,25 t dimensions 1,2 x 0,8 x 2,0 m

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies Dcodpfx Afexgnhao Ien - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Dcsdpfx Afeuigzpe Isn Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Djdpfx Afoxdw Uke Ijcn Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: good (used), Stock number: 3046 Manufacturer: WMW Saalfeld Machine number: 2118/64 Type / Model: BS 16AII Spindle stroke: 140 mm Spindle mount: MT3 Drilling capacity: 30 mm Speed range: 180 to 2,000 rpm Throat depth: 280 mm Djdpfx Afoxgh T Nj Ijcn Table: 570 x 470 mm Clamping surface: 450 x 350 mm Head height adjustment: 200 mm Footprint: 450 x 780 mm Total connected load: 2.3 kW Accessories / Equipment: separate control cabinet; reversible spindle (right/left rotation); thread cutting device Condition: good Weight: 0.65 t Machine dimensions: 850 x 570 x 2,100 mm Control cabinet dimensions: 600 x 400 x 1,250 mm

Condition: excellent (used), functionality: fully functional, Top condition, Easy Stick with new large computer - all drilling heads for Blum fittings Djdpfx Afexgh Tpe Iocn - Manual rulers included - Quick-change drill chuck system - including all drills

Condition: used, Year of construction: 1981, bore capacity in steel (diameter) 23 mm throat 295 mm Dcsdov Ehdispfx Af Isn bore stroke 150 mm taper MK 3 MK table-size 450 mm turning speeds 200 - 2000 U/min total power requirement 1,5 KW weight of the machine ca. 0,3 t dimensions 1,2 x 0,6 x 2,0 m

Condition: good (used), Year of construction: 1998, Toolroom milling machine. Fully functional with Heidenhain 310 control system. X axis (longitudinal) 420 mm Y axis (transversal) 240 mm Z axis (vertical) 120 mm. Table length 730 mm Table width 280 mm Max. table load 75 kg. Dcodpfoxghztex Af Ion

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: - Programming while the program controls the movements of the machine, the operator can easily work on the computer. Dcsdpfxstui R De Af Isn - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Dcedpfx Afowtdmuj Isn Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: used, Year of construction: 2006, functionality: fully functional, Drilling, Milling, and Dowel Insertion Center – KOCH Model WINDOOR-L, Year of Manufacture 2006 Working Length (Y): 150 – 800 mm / 50 – 1,350 mm (2,100 mm in 2 cycles) Material Thickness (Z): 14 – 60 mm Maximum material length: 2,100 mm. Material stops on the right and left are automatically lowered to allow processing of oversized workpieces. The machine is equipped with 2 working fields. 2 workpieces, each with a maximum width of 650 mm, can be placed independently. Wider workpieces are positioned separately. Working height: 900 mm Machine features: • 1 horizontal drilling station • Guide bush for drill bits • Glue injection and dowel insertion station Drilling unit: 2 kW Drill speed: 2,800 rpm, with air nozzles for cleaning the dowel holes 1 dowel drill bit, 8 mm dowel diameter Dowel length: 30 mm Dowel protrusion: 7–14 mm, set to 12 mm 2 Milling units, 3 kW each (12,000 rpm): One right-hand, one left-hand rotation with vertical spindle. Frequency inverter for stepless speed control from 6,000 – 12,000 rpm. Spindle diameter: 40 mm, collet length: 70 mm, profile diameter: 100 – 200 mm. 1 brake for the profiling motors, without acoustic enclosure. 1 Vibratory dowel feeder 1 glue pump 1:1 with central lubrication Electronic glue monitoring 1 material clamping system with 10 pneumatic cylinders • 1 material stop on the left and right • Mechanical digital readouts for adjustment Machine cycle is started by push buttons • Modem for remote diagnostics via telephone line KOCH Numeric positioning control PC Pentium CPU Screen area in local language OS (Windows XP Professional): English 15” touch panel VGA graphics + touch screen via LVDS connection USB interface to PC and touch panel Serial and parallel interface to PC 2.5” hard drive All machine functions, including motor control, entered via the touch panel Electrical supply: 400 V, 50 Hz, 3 phase Pneumatic connection: 1 x R 1/2" female thread, 7 bar Djdpfoxgfd Sox Af Iocn Dust extraction airspeed: approx. 30 m/sec Ambient temperature at installation: min. 10°C (50°F), max. 40°C (100°F)

Condition: defective spare-parts repository (used), Machine to be overhauled Djdpfxjxgdzcs Af Ijcn

Condition: used, bore capacity in steel (diameter) 30 mm throat 315 mm bore stroke 170 mm taper MK 4 MK table-size 650 x 350 mm feeds 0,07 - 0,15 - 0,25 - 0,35 mm/U turning speeds 80 - 1800 U/min total power requirement 2,2 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,3 m Pillar drilling machine with: Feed Left-right rotation Dcjdpfovkizyox Af Ien Coolant system

Condition: like new (used), Year of construction: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Dcsdpfxog I I Eke Af Ien Spindle: MK4 Spindle Speeds: (12) 45-2000 RPM Drill head displacement: 350-1250mm Distance spindle base plate: 350-1420mm

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Spindle taper : MT3 Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm Dcjdpfjxgcy Rex Af Ien

Condition: new, Year of construction: 2023, Pipe drilling / slant drilling machine automatic drilling machine TDM100 2D AT - automaticwith two opposite drilling units - minimum quantity lubrication - manual material clamping - automatic feed and automatic pipe turning - max. pipe length 3.000mm - positioning accuracy +/- 0,2mm - power drilling unit 2 x 2,2 kW - manual insertion and removal of material - drilling heads +/- 50° swiveling - manual 360 degree swiveling - motor speed 295 - 2950 rpm - operation via touch panel - 100 positions programmable - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm Dsdpolgzytefx Af Iscn - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 30 mm arm length 950 mm Dsdpfsv Nq Thex Af Iocn table surface area 1350 x 545 mm bore stroke 150 mm feed - independent 0,003 - 0,25 mm turning speeds 115 - 1500 U/min taper MK 3 total power requirement 2,2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m High-speed radial lathe with: - Feed - Thread cutting device - Continuously variable speed control - Machine light

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 3 MK table-size 560 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1400 U/min total power requirement 1,8 KW weight of the machine ca. 0,55 t Dedpfx Afsw Tdvzs Iocn dimensions 1,2 x 0,8 x 2,1 m Pillar drill with: - Feed - Variable spindle speed

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM Dcjdpfegp Dyxox Af Ijn total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: used, bore capacity in steel (diameter) 40 mm throat 360 mm bore stroke 135 mm taper MK 4 MK table-size 630 mm feeds ja mm/U turning speeds 120 - 1120 U/min Dcodpfx Afom Rlavs Ien total power requirement 2,4 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,75 m

Condition: new, bore capacity in steel (diameter) 20 mm throat 195 mm bore stroke 80 mm Dsdsiiq S Njpfx Af Iocn boring spindle MK 2 table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Condition: new, bore capacity in steel (diameter) 32 mm throat 200 mm bore stroke 120 mm spindle taper MT 4 MK table: 290 x 270 mm column diameter 92 mm Dcedpfx Afeupw Saj Ion turning speeds 150 - 2450 U/min feeds 0 mm/U total power requirement 1,1 kW weight of the machine ca. 95 kg range L-W-H 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge.

Condition: new, bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 180 mm spindle taper MT 4 MK table: 560 x 560 mm column diameter 140 mm turning speeds 50 - 1450 U/min feeds 0,1 - 0,2 mm/U total power requirement 1,5 kW weight of the machine ca. 580 kg range L-W-H 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces Dcsdpfxjupxhie Af Ion • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm Dsdpjv Ehftofx Af Iecn throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm

Condition: used, bore capacity in steel (diameter) 23 mm Dcodow In Drjpfx Af Ion throat 235 mm bore stroke 110 mm table surface area 340 x 280 mm